Elation ELAR EXFLOOD, ELAR EXPAR, ELAR EXBAR BL, ELAR EXBAR UV User Instructions

Elation® Architectural User Instructions

Rev. 11/07

©Elation Architectural®

6122 Eastern Ave.

Los Angeles CA. 90040

www.elationlighting.com

Elation® Architectural Instructions

Thank you for purchasing this Elation® Architectural product. Please read the user

instructions before operating Elation® Architectural xtures.

This manual covers other Elation® Architectural fixtures!

The ELAR WR IR translater has many differnet functions and gives you complete control of your
Elation® Architectural fixtures. Please see the next pages for Elation® Architectural xtures.

To control the your desired fixture you must aim the controller at the front of the fixture and be no
more the 30 feet away. Note: The IR Remote cannot be used when the fixtures are connected to a
DMX controller.

BLACKOUT - Pressing this button will blackout the fixture.
AUTO RUN - This button will run an automatic program. You can control the speed of the Auto

Run by pressing the SPEED button first and then pressing the “+” and “-” buttons.
PROGRAM SELECTION - This button will let you access one of the seven static color selections.
Pressing this button and then press the “+” or “-” to navigate through
the seven programs.
FLASH - This button will activate the strobe effect. You can control the flash rate by pressing the
“+” and “-” buttons. Press this button again to exit strobe mode.

SPEED - Press this button and use the “+” & “-” buttons to adjust the speed of the Auto run.
DMX MODE - This button will let you select which DMX mode you want to use. Some fixtures will

come with different DMX channel modes. This button will switch between the diff­ erent modes. Please see your corresponding fixture in this user manual to find out
about your DMX modes, values, and traits.
SOUND ACTIVE - This button activates sound active mode. Sound active mode will not work for
outdoor LED lights.

SLAVE - This designates the fixture as a slave fixture in a master/slave configuration.
SET ADDRESS - Press this button to set the DMX address. Press this button first, then press the

numbers to set the address. Example: DMX Address 1 Press “S001”
DMX Address 245 Press “S245”

R G B - Press either one of these buttons, and then press the “+” and “-” to adjust the brighness.
“+” and “-” - Use these buttons to adjust the flash rate, speed of the Auto Run, dimming, and pro-

gram selection.

DMX Control:

Operating through an Elation® DMX controller gives the user the freedom to create their own pro­grams tailored to their own individual needs. Note: Your fixture may have different DMX modes,
please see the page corresponding to your fixture, to understand and set the DMX Mode.

1. Before connecting to an Elation® DMX controller, your fixture may have different DMX channel
modes, please select your desired mode by using the DMX Mode button. Set the mode before
you address the fixture. After you have selected your mode, set the DMX address for the fixture
by pressing the “S” button and then use the number buttons to press in your desired address.
See “SET ADDRESS” for examples.

2. Now you may connect the fixture via the XLR connections to any standard Elation® DMX control­ ler. Please see your corresponding fixture in this user manual to find out about your DMX modes,
values, and traits.
Note: Do not connect to DMX unless you use the defaut start address of 1.

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 2

3 CHANNEL MODE

Channel Value Function

1 0 - 255 RED

0% - 100%

2 0 - 255 GREEN
0% - 100%

3 0 - 255 BLUE
0% - 100%

5 CHANNEL MODE

Channel Value Function

ELAR EXPAR SPECIFICATIONS:
Working Position: Any safe working position
Voltage: 100V ~ 240V
Power Consumption: 20W

1 0 - 255 RED
0% - 100%

2 0 - 255 GREEN
0% - 100%

Power Draw: 0.6 Amps
Weight: 11lbs./ 4.8Kgs.
Dimensions: 9.5” (L) x 8.0” (W) x 12” (H)
240 x 200 x 305mm
Colors: RGB Color Mixing

3 0 - 255 BLUE
0% - 100%

4 0 - 255 DIMMING
0% - 100%

Beam Angle: 40 Degree

5 STROBING

LEDs: 145 10mm
DMX Channels: 3 or 5 DMX Channels
IP Rating: IP65

0 - 10 NO FUNCTION
11 - 255 STROBING SLOW - FAST

Warranty: 2 Year (730 days)

DMX CHANNEL MODES: There are two DMX modes, a 3 Channel mode and a 5 Channel mode. If
green LED’s flash you are in 3 Channel mode, if blue LED’s flash you are in 5 Channel mode. Set the
mode before you address the fixture.

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 3

3 CHANNEL MODE

www.elationlighting.com • www.elationlighting.eu

Channel Value Function

1 0 - 255 RED

0% - 100%

2 0 - 255 GREEN
0% - 100%

3 0 - 255 BLUE
0% - 100%

5 CHANNEL MODE

Channel Value Function

ELAR EXFLOOD SPECIFICATIONS:
Working Position: Any safe working position
Voltage: 100V ~ 240V
Power Consumption: 24W

1 0 - 255 RED
0% - 100%

2 0 - 255 GREEN
0% - 100%

Weight: 10lbs./ 4.5Kgs.
Dimensions: 7.0” (L) x 12.0” (W) x 9.5” (H)
178 x 305 x 240mm
Colors: RGB Color Mixing
Beam Angle: 40 Degree

3 0 - 255 BLUE
0% - 100%

4 0 - 255 DIMMING
0% - 100%

LEDs: 216 10mm

5 STROBING

DMX Channels: 3 or 5 DMX Channels
IP Rating: IP65
Warranty: 2 Year (730 days)

0 - 10 NO FUNCTION
11 - 255 STROBING SLOW - FAST

DMX CHANNEL MODES: There are two DMX modes, a 3 Channel mode and a 5 Channel mode. If
green LED’s flash you are in 3 Channel mode, if blue LED’s flash you are in 5 Channel mode. Set the
mode before you address the fixture.

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 4

ELAR EXBAR BL

LED RGB BAR

ELAR EXBAR BL SPECIFICATIONS:
Working Position: Any safe working position
Voltage: 100V ~ 240V
Power Consumption: 30W
Weight: 9.2lbs./ 4.2Kgs.
Dimensions: 39.3” (L) x 3.14” (W) x 2.75” (H)
998 x 79 x 69mm
Colors: RGB Color Mixing
Beam Angle: 40 Degree
LEDs: 240 10mm
(48 Red, 102 Green, & 90 Blue)
DMX Channels: 3 or 5 DMX Channels
IP Rating: IP44
Warranty: 2 Year (730 days)

3 CHANNEL MODE

Channel Value Function

1 0 - 255 RED

0% - 100%

2 0 - 255 GREEN
0% - 100%

3 0 - 255 BLUE
0% - 100%

5 CHANNEL MODE

Channel Value Function

1 0 - 255 RED

0% - 100%

2 0 - 255 GREEN
0% - 100%

3 0 - 255 BLUE
0% - 100%

4 0 - 255 DIMMING
0% - 100%

DMX CHANNEL MODES: There are two DMX modes, a 3 Channel mode and a 5 Channel mode. If
green LED’s flash you are in 3 Channel mode, if blue LED’s flash you are in 5 Channel mode. Set the
mode before you address the fixture.

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 5

5 STROBING
0 - 10 NO FUNCTION
11 - 255 STROBING SLOW - FAST

ELAR EXBAR BL

LED RGB BAR

DMX CHANNEL MODES: There are seven DMX modes: a 2 Channel mode, 3
Channel mode, 4 Channel mode 6 Channel mode, 7 Channel Mode, 9 Chan­nel mode, and 11 Channel mode. You must set the DMX Channel mode
before you address the xture. To select your desired DMX Channel mode
press the DMX mode button, and then press the “+” or “-” buttons to scroll
through the DMX Channel modes. Once you nd your desired DMX Channel
mode, set your desired DMX address. See pages 6 - 8 for the DMX values and
traits for each DMX mode. To set your DMX Channel Mode see below.

• If one section of Red LED’s glow you are in DMX Mode 1: 3 DMX Channels

• If two section’s of Red LED’s glow you are in DMX Mode 2: 4 DMX Channels

• If all of the Red LED’s glow you are in DMX Mode 3: 9 DMX Channels

• If one section of Green LED’s glow you are in DMX Mode 4: 11 DMX Channels

• If two section’s of Green LED’s glow you are in DMX Mode 5: 2 DMX Channels

• If all of the Green LED’s glow you are in DMX Mode 6: 6 DMX Channels

• If one section of Blue LED’s glow you are in DMX Mode 7: 7 DMX Channels

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 6

ELAR EXBAR UV

LED UV BAR

ELAR EXBARR UV SPECIFICATIONS:
Working Position: Any safe working position
Voltage: 100V ~ 240V
Power Consumption: 30W
Weight: 9.2lbs./ 4.2Kgs.
Dimensions: 39.3” (L) x 3.14” (W) x 2.95” (H)
998 x 79 x 74mm
Colors: UV
Beam Angle: 40 Degree
LEDs: 240 10mm
DMX Channels: 2 DMX Channels
IP Rating: IP44
Warranty: 2 Year (730 days)

C hannel Value Function

1 DIMMER

0 - 255 0% - 100%

2 STROBING
0 - 255 SLOW - FAST

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 7

Caution!

No user serviceable parts inside do not attempt repairs. In the event your Elation ®

Architectural xture should fail, contact Elation ® support .

Customer Support:

question should you encounter problems during your set up or initial operation. You may also visit us on the
web at www.Elation®lighting.com for any comments or suggestions. Service Hours are Monday through Friday
9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

Elation ® provides a customer support line, to provide set up help and to answer any

Elation ® Architectural carries a 2 year (730 days) limited warranty. Please ll out the enclosed war -

ranty card to validate your purchase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization ( R .A.) number. If the remote is under warran ­ty you must provide a copy of your proof of purchase invoice. Please contact American DJ® customer
support for a R .A. number.

2-YEA R L IMITED WA RR ANTY

A. Elation® Architectural hereby warrants, to the original purchaser, Elation® Professionals® products to be free of manufac ­turing defects in material and workmanship for a period
be valid only if the product is purchased within the United States of America, including possessions and territories. It is the
owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.

B. For warranty service, send the product only to the Elation® Professionals® factory. All shipping charges must be pre-paid.
If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation® Professionals®
will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the
product, Elation® Professionals® shall have no liability whatsoever for loss of or damage to any such accessories, nor for the
safe return thereof.

of two years (730 days) from the date of purchase. This warranty shall

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which Ela ­tion® Professionals® concludes, after inspection, aects the reliability of the product; if the product has been repaired or ser ­viced by anyone other than the Elation® Professionals® factory unless prior written authorization was issued to purchaser by
Elation® Professionals®; if the product is damaged because not properly maintained as set forth in the instruction manual.

D. This is not a
period specified above, Elation® Professionals® will replace defective parts at its expense, and will absorb all expenses for
warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Elation® Profes ­sionals® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole
discretion of Elation® Professionals®. All products covered by this warranty were manufactured after January 1, 1990, and bear
identifying marks to that eect.

E. Elation® Professionals® reserves the right to make changes in design and/or improvements upon its products without any
obligation to include these changes in any products theretofore manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described
above. Except to the extent prohibited by applicable law, all implied warranties made by Elation® Professionals® in connec ­tion with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth
above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this
product after said period has expired. The consumer’s and or Dealer’s sole remedy shall be such
expressly provided above; and under no circumstances shall Elation® Professionals® be liable for any loss or damage, direct
or consequential, arising out of the use of, or inability to use, this product.

G. This warranty is the only written warranty applicable to Elation® Professionals® Products and supersedes all prior warran ­ties and written descriptions of warranty terms and conditions heretofore published.

service contract, and this warranty does not include maintenance, cleaning or periodic check-up. During the

repair or replacement as is

Elation® Architectural - www.elationlighting.com - Instruction Manual Page 8

©Elation Architectural®

A Division of the AmericanDJ® Group of Companies

World Headquarters:

6122 Eastern Ave. Los Angeles, CA 90040 USA

Tel: [phone] Fax: [phone]

Web: www.elationlighting.com E-mail: [e-mail]