17. Erase all Memory...........................................................................................................13
2
DMX DUO
Section 1: General introduction
Thank you for purchasing the Elation DMX Duo. This unit is a professional DMX recorder and
playback device with high performance and advanced capabilities. This device was designed to
accept information from any universal DMX controller availible on the market today. Any group of
scenes that have been programmed into a universal DMX controller can simply be downloaded into
the DMX Duo for easy playback. In many cases, the DMX Duo is pre-programmed at the factory
when sold in system packages. This unit is made up of two control sections - one part for effect
lighting and the other for playback of dimmers and moving lights. The two parts run completely
independent of one another allowing you more flexibility when playing back shows or turning effects
on and off.
Every unit has been thoroughly tested and carefully packed before shipment. Unpack the shipping
carton and inspect thoroughly saving the carton and all packing materials for possible use later.
Check carefully and make sure your product is not damaged and that no included accessory is
missing. If your product appears to be damaged or missing something, please do not use it- contact
our customer support staff at (800) 322.6337 ext-401 for instructions on what to do.
Section: 2 Safety Information & Maintenance
Please read through this manual carefully and thoroughly, as it gives important information regarding
safety, use and maintenance. Keep this manual with the unit for possible future reference. Please
read all instructions prior to mounting, and operating your DMX Duo. To protect against fire, electric
shock and injury to persons, please follow the safety precautions listed below and observe all
warnings in this manual and warnings printed on the console. The following rules give important
information regarding safety during operation and maintenance for long term use. If you have any
questions regarding operation of this console, please contact our customer support staff at (800) 3226337 ext-401.
xUse only a source of AC power that complies with local building and electrical codes
and has both overload and ground-fault protection.
xTo reduce the risk of fire or electrical shock, do not expose this unit to rain or high
levels of moisture. Do not use this unit near water.
xDo not operate this unit if the ambient temperature exceeds 45
xRefer any service operation not described in this manual to a qualified technician.
xDo not dismantle or modify this unit as there are no user serviceable parts inside. Refer
all service related issues to a qualified technician.
xUse this unit only as described.
xHandle this unit carefully. Any strong shock or vibration may result in malfunction.
xDo not operate this unit when front face panel is removed.
xAny damaged or crimped AC cable should be replaced immediately. Protect the power
supply cable from being walked on or pinched.
xDo not allow children to play with this unit.
xKeep these instructions for future use.
xHeed all warnings.
xFollow all instructions.
xClean only with dry cloth.
xDo not install near any heat sources such as heaters, stoves, amplifiers or any other
heat generating apparatus.
xOnly use attachments and accessories specified by Elation Professional.
xUnplug this unit during lighting storms or when unused for long periods of time.
xIn order to keep your DMX Duo in good working condition, please follow these simple
steps for safety and maintenance.
°C.
3
DMX DUO
Section: 3 Information Notice
Product Modification Warning:
Elation Professional products are designed and manufactured to meet the requirements of United
States and International safety regulations. Modifications to the product could affect safety and render
the product non-compliant to relevant safety standards.
Updates & Changes:
Information and specifications in this manual are subject to change without notice. Elation
Professional assumes no responsibility or liability for any errors or inaccuracies that may appear in
this manual.
All rights reserved. No part of this manual may be reproduced, in any form or by any means, without
permission in writing from Elation Professional.
It is of great benefit to keep this user manual for future reference.
Section 4: Front Panel Overview
1. Power switch- switches the units power on or off. Up position switches the unit ON and Down
position switches the unit OFF.
2. FX timer LED’s- indicate selected timer interval between 1, 3, 5 or 10 minutes. The built in timer
works in conjunction with the eight (8) FX light buttons. Selected timer interval will have its LED lit. (See
next section for additional information).
3. 1-8 FX switches- Switch effects ON or OFF. When an FX button is selected, corresponding button
illuminates. Therefore, corresponding effect or effects will switch ON. These buttons are also used to
select effects for timer interval automatic playback. (See next section for additional information).
4. Display- display’s show times and current operation mode.
5. Send Button- used to send memory data file to another DMX Duo or PC. (See next Section for
additional data transfer information).
6. Record Button- used to record show steps. Also used to engage record mode.
7. Speed Button- to adjust show hold times. When selected, a show hold time can be changed
with the UP/Down buttons.
4
Loading...
+ 9 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.