Elation Cuepix Blinder WW2 User Manual

CUEPIX BLINDER WW2™

user manual! !

ELATION

|

CUEPIX BLINDER WW2

™

|

user manual

www.elationlighting.com

2 CUEPIX BLINDER WW2™ User Manual Ver. 1

©2014 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice.
ELATION PROFESSIONAL logo and identifying product names and numbers herein
are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes
all forms and matters of copyrightable materials and information now allowed by
statutory or judicial law or hereinafter granted. Product names used in this
document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ELATION brands and product
names are trademarks or registered trademarks of their respective companies.

ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any
persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper,
unsafe, insufficient and negligent assembly, installation, rigging, and operation of
this product.

DOCUMENT VERSION

Please check www.elationlighting.com for the latest revision/update of this manual.

Date

Document

Version

Software

Version

DMX

Channel Modes

Notes

2013

1

≥1.04

1/2/3/4

Initial release.

Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, Netherlands

[phone] | [phone] fax

|

www.elationlighting.eu | [e-mail]

Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040

323-582-3322 | 323-832-9142 fax | www.elationlighting.com | [e-mail]

www.elationlighting.com

3 CUEPIX BLINDER WW2™ User Manual Ver. 1

CONTENTS

General Information

4

Warranty

6

Safety Instructions

7

General Guidelines

8

Fixture Overview

9

Fixture Installation

10

Understanding DMX

13

Fixture Menu

17

DMX Channel Functions And Values

20

Cleaning and Maintenance

21

Technical Specifications

22

Optional Accessories

24

www.elationlighting.com

4 CUEPIX BLINDER WW2™ User Manual Ver. 1

GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and

reliable lighting fixtures on the market today! The CUEPIX BLINDER WW2™ has

been designed to perform reliably for years when the guidelines in this booklet

are followed. Please read and understand the instructions in this manual carefully

and thoroughly before attempting to operate this unit. These instructions contain

important information regarding safety during use and maintenance.

UNPACKING

Thank you for purchasing the CUEPIX BLINDER WW2™ by Elation Professional®.

Every CUEPIX BLINDER WW2™ has been thoroughly tested and has been shipped

in perfect operating condition. Carefully check the shipping carton for damage

that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your unit for damage and be sure all accessories necessary to

operate the unit have arrived intact. In the event damage has been found or

parts are missing, please contact our customer support team for further

instructions. Please do not return this unit to your dealer without first contacting

customer support at the number listed below. Please do not discard the shipping

carton in the trash. Please recycle whenever possible.

BOX CONTENTS

• (1) powerCON Cable

• Manual & Warranty Card

www.elationlighting.com

5 CUEPIX BLINDER WW2™ User Manual Ver. 1

CUSTOMER SUPPORT

Elation Professional® provides a customer support line, to provide set up help and

to answer any question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.elationlighting.com for

any comments or suggestions. For service related issue please contact Elation

Professional®.

ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST

Voice: 323-582-3322 Fax: [phone]

E-mail: [e-mail]

ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: [phone] Fax: [phone]

E-mail: [e-mail]

WARRANTY REGISTRATION

The CUEPIX BLINDER WW2™ carries a two-year (730 days) limited warranty. Please

fill out the enclosed warranty card to validate your purchase. All returned service

items whether under warranty or not, must be freight pre-paid and accompany

a return authorization (R.A.) number. The R.A. number must be clearly written on

the outside of the return package. A brief description of the problem as well as

the R.A. number must also be written down on a piece of paper and included in

the shipping container. If the unit is under warranty, you must provide a copy of

your proof of purchase invoice. Items returned without a R.A. number clearly

marked on the outside of the package will be refused and returned at

customer’s expense. You may obtain a R.A. number by contacting customer

support.

IMPORTANT NOTICE!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself; doing so will void your manufactures warranty. Damages resulting from

modifications to this fixture and/or the disregard of safety and general user

instructions found in this user manual void the manufactures warranty and are

not subject to any warranty claims and/or repairs.

www.elationlighting.com

6 CUEPIX BLINDER WW2™ User Manual Ver. 1

2 - YEAR LIMITED WARRANTY

A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to

be free of manufacturing defects in material and workmanship for a period of two years, (730 days)

from the date of purchase. This warranty shall be valid only if the product is purchased within the

United States of America, including possessions and territories. It is the owner’s responsibility to

establish the date and place of purchase by acceptable evidence, at the time service is sought.

B. For warranty service, send the product only to the Elation Professional® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement) are within

the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated

point within the United States. If the entire instrument is sent, it must be shipped in its original package.

No accessories should be shipped with the product. If any accessories are shipped with the product,

Elation Professional® shall have no liability what so ever for loss of or damage to any such accessories,

nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified

in any manner which Elation Professional® concludes, after inspection, affects the reliability of the

product; if the product has been repaired or serviced by anyone other than the Elation Professional®

factory unless prior written authorization was issued to purchaser by Elation Professional®; if the

product is damaged because not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning or

periodic check-up. During the period specified above, Elation Professional® will replace defective

parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of

defects in material or workmanship. The sole responsibility of Elation Professional® under this

warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the

sole discretion of Elation Professional®. All products covered by this warranty were manufactured

after January 1, 1990, and bare identifying marks to that effect.

E. Elation Professional® reserves the right to make changes in design and/or improvements upon its

products without any obligation to include these changes in any products theretofore

manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any accessory

supplied with products described above. Except to the extent prohibited by applicable law, all

implied warranties made by Elation Professional® in connection with this product, including

warranties of merchantability or fitness, are limited in duration to the warranty period set forth above.

And no warranties, whether expressed or implied, including warranties of merchantability or fitness,

shall apply to this product after said period has expired. The consumer’s and or Dealer’s sole remedy

shall be such repair or replacement as is expressly provided above; and under no circumstances shall

Elation Professional® be liable for any loss or damage, direct or consequential, arising out of the use

of, or inability to use, this product.

G. This warranty is the only written warranty applicable to Elation Professional® Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore

published.

www.elationlighting.com

7 CUEPIX BLINDER WW2™ User Manual Ver. 1

SAFETY INSTRUCTIONS

The CUEPIX BLINDER WW2™ is an extremely sophisticated piece of electronic

equipment. To guarantee a smooth operation, it is important to follow the

guidelines in this manual. The manufacturer of this device will not accept

responsibility for damages resulting from the misuse of this fixture due to the

disregard of the information printed in this manual.

This device falls under PROTECTION CLASS 1. It’s essential this device be

grounded properly. Only qualified personnel should perform all electrical

connections.

KEEP THIS FIXTURE AWAY FROM RAIN AND MOISTURE!

UNPLUG POWER BEFORE SERVICING FIXTURE

NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT

NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE

SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK

• For proper operation, follow the Installation guidelines described in this manual. Only qualified

and certified personnel should perform installation of this fixture and only the original rigging parts

(brackets) included with this fixture should be used for installation. Any modifications will void the

original manufactures warranty and increase the risk of damage and/or personal injury.

• Never look directly into the light source of this fixture to prevent risk of injury to your retina, which

may induce blindness. Those suffering from EPILEPSY should avoid looking directly into the light

source of this unit at all times.

• The fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between

this fixture and other devices or a wall for proper cooling.

• Always disconnect from main power source before performing any type of service and/or

cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by

tugging the wire portion of the cord.

• Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If

the power cord is damaged, replace it immediately with a new one of similar power rating.

www.elationlighting.com

8 CUEPIX BLINDER WW2™ User Manual Ver. 1

GENERAL GUIDELINES

• NEVER OPEN THIS FIXTURE WHILE IN USE!

• During the initial operation of this fixture, a light smoke or smell may emit from the

interior of the fixture. This is a normal process and is caused by excess paint in the

interior of the casing burning off from the heat associated with the lamp and will

decrease gradually over time.

• This fixture is a professional lighting effect designed for INDOOR / DRY LOCATIONS

ONLY on stage, in nightclubs, theatres, etc.

• Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while

operating, to prevent any fire hazard.

• The fixture must be installed in a location with adequate ventilation, at least 1.5

feet (.5m) from adjacent surfaces. Be sure no air ventilation slots are blocked.

• DO NOT attempt installation and/or operation without knowledge how to do so.

• DO NOT permit operation by persons who are not qualified to operate this type

of fixture. Most damages are the result of operations by nonprofessionals.

• Consistent operational breaks may ensure the fixture will function properly for

many years to come.

• DO NOT shake fixture, avoid brute force when installing and/or operating fixture.

• Always install the fixture with an appropriate safety cable. When installing the

fixture in a suspended environment, always use mounting hardware that is no less

than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw

holes in the bracket of the fixture.

• Use the original packaging and materials to transport the fixture in for service.

• DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power

and allow approximately 15 minutes for the fixture to cool down before replacing

or serving.