Elation Aerial Pak 4 User Manual

Aerial Pak 4™ Introduction

Unpacking: Thank you for purchasing the Aerial Pak 4™ by Elation

Professional®. Every Aerial Pak 4™ has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your unit for
any damage and be sure all accessories necessary to operate the unit
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur­ther instructions. Please do not return this unit to your dealer without
first contacting customer support.

Introduction: The Aerial Pak 4™ is a unique wireless four channel

switching pack. This unit is designed to function as a remote control,
wireless on/off switcher with four independent outlets. Multiple Aerial
Pak 4’s™ can be used in a single room and be controlled by a single
remote control. The unit has a maximum power output of 1800 watts
or 15 amps, which should be more than enough power to handle most
special effect lighting fixtures.

Customer Support: Elation Professional® provides a customer sup-

port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.elationlighting.com for any comments
or suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

Rev 5/03

User Instructions

©Elation Professional®

4295 Charter Street

Los Angeles Ca. 90058

www.elationlighting.com

Warning! To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war
ranty. In the unlikely event your unit may require service please contact
Elation Professional®.

At Elation Professional
package all are units in recyclable material. Please do not dispose of
the shipping carton in the trash, recycle whenever possible.

©Elation Professional® www.elationlighting.com Aerial Pak 4™ User Manual Page 2

® we are concerned about the environment, and

-

Aerial Pak 4™ Safety Precautions

Aerial Pak 4™ Features

• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt­ age for your unit.

• Do not attempt to operate this unit if the power cord has been
frayed or broken.

• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user
serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out­ doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,

• Wireless Control

• Four Channel Output

• 100 Foot Remote Range

• Channel Activity Indicators

• Built-in Adjustable Mounting Bracket

• Replaceable Remote Control

• Compact Case Design

• Protective Reset Breaker (no more fuses)

• Maximum Channel Output 1200w/ 10A

• Maximum Unit Output 1800w/15A

Aerial Pak 4™ Product Registration

The Aerial Pak 4™ carries a one year limited warranty. Please fill out
the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre­paid and accompany a return authorization (R.A.) number. The R.A.
number must be clearly written on the outside of the return package.
A brief description of the problem as well as the R.A. number must
also be written down on a piece of paper included in the shipping
carton. If the unit is under warranty, you must provide a copy of your
proof of purchase invoice. You may obtain a R.A. number by contact
ing our customer support team on our customer support number. All
packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper.

paying particular attention to cords at plugs, convenience recep­ tacles, and the point where they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 7 for cleaning details.

• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

Aerial Pak 4™ General Instructions

To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.

• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Aerial Pak 4™ Reset Breaker

This unit uses a protective breaker to protect the unit in the event of
power surges or fluctuations. To reset the breaker, push the breaker
button in until you hear it pop back in to place. If the breaker contin
ues to pop, stop using the unit and contact customer support the unit
may require service.

©Elation Professional® - www.elationlighting.com - Aerial Pak 4™ User Manual Page 3 ©Elation Professional® - www.elationlighting.com - Aerial Pak 4™ User Manual Page 4

-

-