Elatec T4DO-F, T4DT-FB2BEL, T4DT-FB2WEL, T4DT-FR2BEL, T4DT-FR2WEL User Manual
...
TWN4 MULTITECH*
125kHz/134.2kHz & 13.56MHz Contactless Reader/Writer
*Previously known as TWN4 MIFARE NFC
Elatec’s TWN4 family of transponder readers and writers allows users to read and write to almost any 125kHz /
134.2kHz and 13.56MHz tags and/or labels – it supports all major transponders from various suppliers like ATMEL,
EM, ST, NXP, TI, HID, LEGIC, etc. and ISO standards like ISO14443A (T=CL), ISO14443B (T=CL), ISO15693,
ISO18092 / ECMA-340 (NFC).
The new generation is a direct enhancement to the successful TWN3 family as it comes in the same mechanical
dimensions (OEM PCB and Desktop Housing). Desktop supports host communication via USB or RS232.
Special Features:
Powerful SDK for writing Apps which are executed directly on the reader
Infield Upgradeable
Direct chip-commands support
Onboard 18kB flash storage
Two onboard SAM sockets (Secure Access Module)
CCID and PC/SC 2.01
1)
Additional interfaces for OEM PCB version
Serial (logical level 3.3V, CMOS 5V tolerant), I²C, SPI2), Clock/Data3), Wiegand3), CAN
2)3)
,1-Wire
2)
Dedicated expansion bus for connection of LCD, mass storage, etc.
2 GPIOs (General Purpose Input/Output)
Step Model Data on request
Worldwide certifications:
WEEE, RoHS, R&TTE, CE (Europe), FCC (USA), IC (Canada), ACA (Australia / New Zealand),
MIC (Japan), KCC (Korea), ANATEL (Brasil), CFT (Mexico), ICASA (South Africa), EAC (Russia),
India, Israel, Thailand, Venezuela
TWN4 OEM PCB
Bottom View
TWN4 OEM PCB
Top View
Desktop Top View
Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the u pdate of this document is not controlled. Elatec declines all responsibility for the
use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own
responsibility. Where application information is given, it is only advisory and does not form part of the specification. Disclaimer: All names are registered trademarks.
Elatec GmbH
Zeppelinstr. 1
82178 Puchheim
Germany
Phone:
+49 89 5529961 0
Fax:
+49 89 5529961 129
info-
rfid@elatec.com
www.elatec-
rfid.com
© 2015 Elatec GmbH – DocRev9 – 08/2015
Technical Data
4)
Frequency
125kHz
, 134.2kHz (LF) / 13.56MHz (HF)
Housing
Material
ABS UL94-V0, colour black or white
Dimensions
(L x W x H)
Desktop
Reader: 88mm x 56mm x 18mm / 3.5inch x 2.2inch x 0.7inch
OEM
Board: 76mm x 49mm x 14mm / 3.0inch x 1.9inch x 0.6inch
Power Supply
4.3V
..5.5V via USB or RS232; RS232 requires 5V external power supply; via connector CNB 3.3V +/- 5%
Current
Consumption
Depending on antenna: RF field on:
120mA typically / Sleep: 500µA typ. / Cyclic Operation: TBD
Temperature
Range
Operating:
-25°C up to +80°C (-13°F up to +176°F)
Storage:
-45°C up to +85°C (-49°F up to +185°F)
Read
- / Write Distance
Up
to 100mm / 4inch (depending on transponder)
HOST Interface
USB, RS232, serial (logical level 3.3V,CMOS 5V tolerant), I²C, SPI
2)
, Clock/Data3), Wiegand3), 1-Wire
2)
CAN, RS422/485 require adapter board
OS Support
Windows XP, Vista, Embedded
CE2), 7(32-/64-bit), 8, 8.1,10, Linux, Android, iOS2), MAC OS X
2)
Transmission Speed
Host:
USB: Full speed (12Mbit) – RS232: up to 115.200baud
Air:
up to 848kbit/s
Modes of Operation
USB keyboard emulation – USB virtual COM port – Transparent (direct chip-commands support)
CCID and PC/SC 2.01
1)
Relative Humidity
5
% to 95% non-condensing
Supported
Transponders
Standard
125kHz / 134.2kHz: 4100, 4102, 4200
10)
, 4050, 4150, 4450, 4550, AWID, CASI-RUSCO, HITAG 1
11)
, HITAG 2
11)
,
HITAG S
11)
, Keri, Miro, Pyramid, TIRIS/HDX, UNIQUE, FDX-B, Q5, TITAN, T55x7, ZODIAC
2)
Optionally, in consideration: 4305, Cardax, IDTECK
13.56MHz / ISO14443A: MIFARE Classic, Classic 1k & 4k EV17), MIFARE Mini, MIFARE DESFire EV1, MIFARE Plus S&X,
MIFARE Pro X8), SmartMX8), MIFARE Ultralight, MIFARE Ultralight EV17), MIFARE Ultralight C, SLE44R35, SLE66Rxx (myd move), LEGIC Advant5), PayPass8), NTAG2XX
7)
13.56MHz / ISO14443B: Calypso8)incl. Innovatron radio protocol 14443-B’6), CEPAS8), HID iCLASS5), Moneo8), PicoPass
8)
,
SRI512, SRT512, SRI4K, SRIX4K
13.56MHz / ISO15693: EM4x338), EM4x358), HID iCLASS5), ICODE SLI, LEGIC Advant5), M24LR16/64, Tag-it,
SRF55Vxx (my-d vicinity)8), PicoPass
8)
13.56MHz / ISO18092 / NFC: NFCIP-1: Active and passive communication mode, Peer-to-Peer, NFC Forum
Tag Type 1-4, Sony FeliCa
9)
Version P
Standard+Cotag
, G-Prox
12)
, HID (Prox, Prox II, Duo Prox II, ISO Prox II, Micro Prox, ProxKey III), NexWatch, Indala, ioProx
Version PI
Version P + HID iCLASS SE/SR/SEOS (CSN and Facility Code/PAC)
13)
Certifications
CE
, R&TTE, RoHS-II compliant, FCC, IC, ACA, MIC, KCC, ANATEL, CFT, ICASA, EAC), India, Israel, Thailand, Venezuela
MTBF
500,000
hours
Weight
Approx
. 20 g (without housing)
Order Code
OEM
Board
USB
black / white
RS232
black / white
Standard
T4DO
-F
T4DT
-FB2BEL / T4DT-FB2WEL
T4DT
-FR2BEL / T4DT-FR2WEL
Version P
T4DO
-F-P
T4DT
-FB2BEL-P / T4DT-FB2WEL-P
T4DT
-FR2BEL-P / T4DT-FR2WEL-P
Version PI
T4DO
-F-PI
T4DT
-FB2BEL-PI / T4DT-FB2WEL-PI
T4DT
-FR2BEL-PI / T4DT-FR2WEL-PI
1)
In Preparation2)On Request Only3)External Interface Required4)Target Specification 5)UID Only6)UID Only, read/write On Request 7)r/w enhanced security features on request 8)r/w in direct chip command mode 9)UID + r/w public area
10)
Only emulation of 4100,4102
11)
Without encryption mode
12)
Hash Value Only
13)
UID + PAC (CSN & Facility Code), read/write on request
Accessories
Order Code
Snap-in holder
HKSI-B - black
HKSI-W - white
Bracket Holder
HKBR-B - black
HKBR-W - white
CAB-B2 - USB cable 200cm/78.74inch
CAB-B3 - USB cable 12cm/4.72inch
CAB-B4 - USB cable 45cm/17.72inch
CAB-B7 - USB cable 120cm/47.24inch
CAB-M1 - USB cable mini 12cm/4.72inch
CAB-M2 - USB cable mini 25cm/9.84inch
CAB-R2 - RS232 cable 200cm/78.74inch
Order
Code
PWA-EU - Power Supply (EU)
PWA-AUS -Power Supply (AU)
PWA-US - Power Supply (US)
PWA-UK - Power Supply (UK)
Drawing/Pin Out
Refer to document DS_TWN4 Pinout & Cables
Loading...