EL6293C - Product Brief
Laser Diode Driver with Waveform Generator
EL6293C - Product Brief
Features
• Complete programmable laser
diode driver
• 250mA maximum output
• 8bit x 8bit multiplying DAC output
provides 8bit full scale adjustment
and 8bit resolution at any full scale
output
• 0.17 nsec timer resolution
• Two laser outputs allows
read/write DVD and CD
combinations
• Programmable waveform values
support 2.6GB DVD-RAM, 4.7GB
DVD-RAM, DVD-R, DVD+RW,
DVD-RW, CD-RW, and CD-R
• Analog input supports APC
• HFM oscillator programmable to
100mA
from 200MHz to
P-P
600MHz
• PLL allows reduced-frequency
clock on flex cable
• Separate serial input works up to
25Mb/sec
Applications
• Combination DVD writable and
CD writable drives
• DVD camcorders
• DVD video recorders
General Description
The EL6293C is a highly integrated laser diode driver designed to support multi-standard writable optical drives. It accomplishes this by
incorporating a waveform generator wherein the diode currents and
timing details can be programmed before operation. The data input circuitry inspects the NRZ serial data waveform and generates
programmed waveforms in recognition of 3, 4, 5, or 6 or more clock
periods of space changing to 3, 4, 5, or 6 or more clock periods of
mark, and vice versa.
This programmable architecture allows reprogramming of the timers
to support different media, DVD or CD standards, and different
speeds. The programming is accomplished through a serial interface
port. Two outputs are provided to support dual-laser multi-standard
optical heads.
The EL6293C requires 3.3V and 5V supplies, with all the logical
interface operating on the 3.3V supply.
The EL6293C is available in a 32-pin LPP package for improved thermal performance and reduced footprint.
Connection Diagram
SCLK
SDIO
SEN
BUSY
MONITOR
VOUT
RGAIN
27
26
25
PDIN
24
VREF
23
VSO
22
IOUT1
RWB
CLK
NRZ
VSL
32
31
30
29
28
1
2
3
4
5
Ordering Information
Part No Temp. Range Package Outline #
EL6293CL 0°C to +70°C 32-Pin LPP MDP0046
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
GND
GND
VSA
VSA
RFREQ
6
7
8
9
10
RSET
Thermal Pad
11
12
NC
IAPC
32-Pin LPP Top View
13
14
GND
GND
21
GND
20
VSO
19
OUT2
18
OUT2
17
VSO
15
16
L/G
ENA
May 23, 2001
EL6293C - Product Brief
Laser Diode Driver with Waveform Generator
EL6293C - Product Brief
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described
herein and makes no representations that they are free from patent infringement.
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used
within Life Support Systems without the specific written consent of
Elantec, Inc. Life Support systems are equipment intended to sup-
Elantec Semiconductor, Inc.
675 Trade Zone Blvd.
Milpitas, CA 95035
Telephone: (408) 945-1323
(888) ELANTEC
Fax: (408) 945-9305
European Office: +44-118-977-6020
Japan Technical Center: +81-45-682-5820
port or sustain life and whose failure to perform when properly used
in accordance with instructions provided can be reasonably
expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support
Systems are requested to contact Elantec, Inc. factory headquarters
to establish suitable terms & conditions for these applications. Elantec, Inc.’s warranty is limited to replacement of defective
components and does not cover injury to persons or property or
other consequential damages.
May 23, 2001
2
Printed in U.S.A.