ELANT EL5423CR, EL5423CL, EL5323CR, EL5323CL, EL5123CY Datasheet

...
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
12MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Input-Output Buffers
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
Features
• 12MHz -3dB bandwidth
• Supply voltage = 4.5V to 16.5V
• Low supply current (per buffer) = 600µA
• High slew rate = 15V/µs
• Rail-to-rail input/output swing
• Ultra-small packages
Applications
• TFT-LCD drive circuits
• Electronics notebooks
• Electronic games
• Touch-screen displays
• Personal communication devices
• Personal digital assistants (PDA)
• Portable instrumentation
• Sampling ADC amplifiers
• Wireless LANs
• Office automation
• Active filters
• ADC/DAC buffers
Ordering Information
Part No Package Tape & Reel Outline #
EL5123CY 10-Pin MSOP MDP0043
EL5223CL 24-Pin LPP MDP0046
EL5223CR 20-Pin TSSOP MDP0044
EL5323CL 24-Pin LPP MDP0046
EL5323CR 24-Pin TSSOP MDP0044
EL5423CL 32-Pin LPP MDP0046
EL5423CL 28-Pin TSSOP MDP0044
General Description
The EL5123C, EL5223C, EL5323C, and EL5423C are low power, high voltage rail-to-rail input/output buffers designed primarily for use in reference voltage buffering applications for TFT_LCDs. They are available in quad (EL5123C), octal (EL5223C), 10-channel (EL5323C), and 12-channel (EL5423C) topologies. All buffers feature a -3dB bandwidth of 12MHz and operate from just 600µA per buffer. This family also features fast slewing and settling times, as well as a continuous output drive capability of 30mA (sink and source).
The quad channel EL5123C is available in the 10-pin MSOP package. The 8-channel EL5223C is available in both the 20-pin TSSOP and 24-pin LPP packages, the 10-channel EL5323C in the 24-pin TSSOP and 24-pin LPP packages, and the 12-channel EL5423C in the 28-pin TSSOP and 32-pin LPP packages. All buffers are specified for opera­tion over the full -40°C to +85°C temperature range.
Connection Diagrams
1
VIN1
2
VIN2
3
VIN3
4
VIN4
5
VS+
6
VS+
7
VIN5
8
VIN6
9
VIN7
10
VIN8
VOUT1
VOUT2
VOUT3
VOUT4
VS-
VS-
VOUT5
VOUT6
VOUT7
VOUT8
20
19
18
17
16
15
14
13
12
11
VIN1
1
VIN2
2
VS+
3
VIN3
4
VIN4
5 6
EL5123C
(10-Pin MSOP)
VOUT1
10
VOUT2
9
VS-
8
VOUT3
7
VOUT4
October 24, 2001
EL5223C
(20-Pin TSSOP Top View)
Connection Diagrams are continued on page 5
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
12MHz 4-, 8-, 10- & 12-Channel Rail-to-Rail Input-Output Buffers
EL5123C, EL5223C, EL5323C, EL5423C - Product Brief
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the cir­cuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement.
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used within Life Support Systems without the specific written consent of Elantec, Inc. Life Support systems are equipment intended to sup-
Elantec Semiconductor, Inc.
675 Trade Zone Blvd. Milpitas, CA 95035 Telephone: (408) 945-1323
(888) ELANTEC Fax: (408) 945-9305 European Office: +44-118-977-6020 Japan Technical Center: +81-45-682-5820
port or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. Users con­templating application of Elantec, Inc. Products in Life Support Systems are requested to contact Elantec, Inc. factory headquarters to establish suitable terms & conditions for these applications. Elan­tec, Inc.’s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages.
October 24, 2001
2
Printed in U.S.A.
Loading...