ELAN Lighting PSD 512 II, PSD 518, PSD 512 User Manual
PSD 512 II
Thank you for purchasing PSD 512 II. Every suit has been thoroughly tested and shipped in
perfect condition. Carefully check the shipping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, carefully inspect your unit for any
damage and be sure all accessories necessary to operate the unit has arrived intactly. In
the case damage has been found or parts are missing, please contact the manufacturer
or your dealer for further instructions. Do not return this unit to your dealer without any
warning.
USER’S MANUAL
2
1. Safety .......................................................................... 3
2. Set Up ......................................................................... 4
3. Operating Instructions ................................................. 4
4. Cleaning ...................................................................... 7
5. Troubleshooting ........................................................... 7
Index
FOR YOUR OWN SAFETY, PLEASE READ
THIS USER MANUAL CAREFULLY BEFORE
POWERING OR INSTALLING. SAVE IT FOR
FUTURE REFERENCE
3
1. Safety
Warning! To prevent or reduce the risk of
electrical shock or re, do not expose this
unit to rain or moisture.
PLEASE consider that damages caused
by manual modications to the device
are not subject to warranty.
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing
so will void your manufactures warranty. In the unlikely event your unit may require service please contact
the manufacturer or your dealer.
PLEASE recycle the shipping carton when ever possible
To optimise the performance of this product, please read these operating instructions carefully to
familiarise you with the basic operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please keep this manual with the unit, for
future reference.
• To reduce the risk of electrical shock or re, do
not expose this unit to moisture.
• Do not spill water or other liquids into or on to
your unit.
• Be sure that the local power outlet match that of
the required voltage for your unit,
• Do not attempt to operate this unit if the power
cord has been frayed or broken.
• Do not attempt to remove or break o the
ground prong from the electrical cord. This
prong is used to reduce the risk of electrical
shock and re in case of an internal short.
• Disconnect from main power before making any
type of connection.
• Do not remove the cover under any conditions.
There are user serviceable parts inside.
• Never operate this unit when its rear cover is
removed.
• Never plug this unit into a dimmer pack.
• Always be sure to mount this unit in an area
that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.
• Do not attempt to operate this unit, if it
becomes damaged.
• This unit is intended for indoor use only; use of
this product outdoors voids all warranties.
• During long periods of non-use, disconnect the
units main power.
• Always mount this unit un safe and stable
matter.
• Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to the point they exit from
the unit.
• Cleaning unit should be cleaned only as
recommended by the manufacturer. See
‘Cleaning” for details.
• Heat –The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
ampliers) that produce heat.
• The unit should be serviced by qualied service
personnel when:
A. The power-supply cord or the plug has been
damaged.
B. Objects have fallen, or liquid has been
spilled into the appliance.
C. The appliance has been exposed to rain or
water.
D. The appliance does not appear to operate
normally or exhibits s marked change in
performance.
General Instructions
Safety Precautions
Loading...