ELAN Lighting CITYCOLOR-551-UV User Manual
CITYCOLOR-551-UV
Thank you for purchasing the CITYCOLOR-551-UV. The item has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check the shipping carton
for damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your xture for any damage and be sure all accessories necessary to
operate the unit has arrived intact. In the case damage has been found or parts are missing,
please contact the manufacturer or your dealer for further instructions. Do not return this unit
to your dealer without rst contacting.
USER’S MANUAL
2
1. Introduction .................................................................. 3
2. Safety Instructions ....................................................... 3
3. Operation ..................................................................... 4
Display Men ................................................................................. 4
Main Functions .............................................................................. 5
DMX Functions and Values .......................................................... 7
4. Cleaning and Maintenance .......................................... 7
5. Installation ................................................................... 7
Index
FOR YOUR OWN SAFETY, PLEASE READ
THIS USER MANUAL CAREFULLY BEFORE
POWERING OR INSTALLING. SAVE IT FOR
FUTURE REFERENCE
3
1. Introduction
2. Safety Instructions
PLEASE consider that damages caused by manual modications
to the device are not subject to warranty.
Thank you for having chosen our LED lighting.
Unpack the device, inside the box you should nd:
• The xture
• One power cable
• One XLR connection cable
• This manual
• Please check carefully that there is no damage caused by transportation. Should there be any,
consult your dealer and don’t install this device.
This device has left the factory in perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
• This device falls under protection-class I. Therefore it is essential that the device should be
earthed.
• The electric connection must carry out by qualied person.
• If the external exible cable or cord of this xture is damaged, it shall be exclusively replaced
by the manufacturer or his [ service agent or a similar qualied person in order to avoid a
FEATURES
• Over temperature protect
• Can Set DMX Address by controller
• 3,5,or 7 DMX channels selectable for numerous applications
• DMX-controlled operation or stand alone operation with Master/Slave-function
• Automatic identify Master signal and change to slave mode
• Stepless RGB colour changing
• Colour calibrate function
• Equipped with 88 x 3W UV LEDS
• Switch-mode power supply, 110v-240v
Loading...