ELAN Lighting CABLED-150-SPOT-MKII User Manual
CABLED-150-SPOT-MKII
Thank you for purchasing a product from our CABLED-150-SPOT-MKII. Every suit has been
thoroughly tested and shipped in perfect condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your unit for any damage and be sure all accessories necessary to operate
the unit has arrived intactly. In the case damage has been found or parts are missing, please
contact Acson Comercial or your local supplier for further instructions. Do not return this unit
without any warning.
USER’S MANUAL
2
Contents
FOR YOUR OWN SAFETY, PLEASE READ
THIS USER MANUAL CAREFULLY BEFORE
POWERING OR INSTALLING. SAVE IT FOR
FUTURE REFERENCE
1. Safety Instructions ............................................................................................ 3
2. Unpacking ......................................................................................................... 4
3. Features & Specifications ................................................................................. 4
4. Photometric Data ............................................................................................... 5
5. Operation Instructions ...................................................................................... 6
6. Installation Instructions .................................................................................... 6
7. DMX-512 Control Connections .......................................................................... 8
8. Menu Operations ............................................................................................... 8
9. Cleaning and Maintenance ............................................................................... 10
3
1. Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this user manual.
• If the device has been exposed to temperature changes due to environmental changes, do not switch it
on immediately. The arising condensation could damage the device.
• Leave the device switched off until it has reached room temperature.
• This device falls under protection-class I. Therefore it is essential that the device be earthed.
• The electric connection must carry out by qualified person.
• The device shall only be used with rate voltage and frequency.
• Make sure that the available voltage is not higher than stated at the end of this manual.
• Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case, replacement of the cable must be done by an authorized dealer.
• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• During initial start-up some smoke or smell or smell may arise. This is a normal process and does not
necessarily mean that the device is defective, it should decrease gradually.
• Please don’t project the beam onto combustible substances.
• Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for
smooth air flow, so there should be no shelter for fans and ventilation for heat radiation.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer of his service agent or a similar qualified person in order to avoid a hazard.
Caution!
Be careful when operating this fixture. High voltage can cause dangerous
electric shock when manipulating wires.
!
Please review the following before you start
4
2. Unpacking
3. Features & Specifications
Thank you for choosing our CABLED-150-SPOT-MKII moving head light. For your own safety, please read
this manual before installing the device. This manual covers the important information on installation and
applications. Please install and operate the fixture according to these instructions. Please keep this manual
well stored for future needs.
The CABLED-150-SPOT-MKII is made of a new type of high temperature strength of engineering plastic
and cast aluminum casing with nice outlook. The fixture is designed and manufactured strictly following CE
standards, complying with international standard DMX512 protocol. It’s available independently controlled
and linkable with each other for operation. And it is applicable for large-scale live performances, theater,
studio, nightclubs and discos.
The CABLED-150-SPOT-MKII features high brightness and stability. Please carefully unpack it when you
receive the fixture and check whether it is damaged during the transportation.
• 150W High Output White LED
• 50,000 hours lifespan and low power consumption
• Beam Angle 15°, focus function
• High light output, 3450LUX@5M at White light
• Temperature protect function, when the internal Temperature is up to 40° and then the
fans begin to work, when the internal temperature is up to 70°and the brightness reduce
half.
• Color Wheel: 7 colors +white, rotation with
variable direction and speed
• 1 static Gobo Wheel: 8 gobos +white, wheel
rotation and shake
• 1 Rotation Gobo Wheel: 6 gobos +white, wheel rotation and shake
• Prism: 3-facet Prism, bi-directionally rotatable
at variable speeds
• High speed strobe effect with 1-25 flashers
per second
• Internal program available
• 16/14/12/10 DMX Channels USITT DMX-512
• DMX 512, master-slave and sound activated
controllable or auto operation
• Colorful LCD display
• Efficient low noise fan cooling system
• POWERCON IN/OUT
• 3-pin XLR connectors IN/OUT
• Two 1/4 turn fastening Omega Clamps
• IP 20 protection rating
1
1
2
3
4
5
2
3
4
5
Make sure the following items are included inside the box:
Moving head (1pc)
Signal Cable (1pc)
Omega Clamp (1pc)
Power Cable (1pc)
User Manual (1pc)
Loading...