ELAN Lighting CABLED-150-BEAM User Manual

CABLED-150-BEAM

Thank you for purchasing a product from our CABLED-150-BEAM Every suit has been

thoroughly tested and shipped in perfect condition. Carefully check the shipping carton

for damage that may have occurred during shipping. If the carton appears to be damaged,

carefully inspect your unit for any damage and be sure all accessories necessary to operate

the unit has arrived intactly. In the case damage has been found or parts are missing,

please contact Acson Comercial or your local supplier for further instructions. Do not return

this unit without any warning.

USER’S MANUAL

2

Contents

FOR YOUR OWN SAFETY, PLEASE READ

THIS USER MANUAL CAREFULLY BEFORE

POWERING OR INSTALLING. SAVE IT FOR

FUTURE REFERENCE

1. Safety Instructions ............................................................................................... 3

2. Unpacking .......................................................................................................... 3

3. Features & Specications ................................................................................... 4

4. Photometric Data ............................................................................................... 5

5. Operation Instructions ........................................................................................ 5

6. Installation .......................................................................................................... 6

7. DMX-512 Control Connections .......................................................................... 7

8. Menu Operations ................................................................................................ 7

9. DMX Channels .................................................................................................... 8

10. Maintenance And Cleaning .............................................................................. 10

3

1. Safety Instructions

2. Unpacking

Caution!

Be careful when operating this xture. Dangerous

voltage can cause serious electric shock.

!

This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written

in this user manual.

• If the device has been exposed to temperature changes due to environmental changes, do not switch

it on immediately. The arising condensation could damage the device.

• Leave the device switched o until it has reached room temperature.

• This device falls under protection-class I. Therefore it is essential that the device be earthed.

• The electric connection must carry out by qualied person.

• The device shall only be used with rate voltage and frequency.

• Make sure that the available voltage is not higher than stated at the end of this manual.

• Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,

replacement of the cable must be done by an authorized dealer.

• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.

• During initial start-up some smoke or smell or smell may arise. This is a normal process and does not
necessary mean that the device is defective, it should decrease gradually.

• Please don’t project the beam onto combustible substances.

• Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for
smooth air ow, so there should be no shelter for fans and ventilation for heat radiation.

• If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced by
the manufacturer of his service agent or a similar qualied person in order to avoid a hazard.

Thank you for choosing our LED 150W moving head light. For your own safety, please read this manual
before installing the device. This manual covers the important information on installation and applications.

Please install and operate the xture with following instructions. Meanwhile, please keep this manual well

for future needs.

The LED 150W is made of a new type of high temperature strength of engineering plastic and cast alumi-

num casing with nice outlook. The xture is designed and manufactured strictly following CE standards,

complying with international standard DMX512 protocol. It’s available independently controlled and linka­ble with each other for operation. And it is applicable for large-scale live performances, theater, studio,
nightclubs and discos.

The 150W Moving head light which features high brightness and stability. Please carefully unpack it when

you receive the xture and check whether it is damaged during the transportation.

4

2.1 Included in the box:

3. Features & Specications

1

1

Moving Head

2

Signal Cable

3

Power Clamp

4

Omega Clamp

5

User Manual

• 150W High Output White LED

• 50,000 hours lifespan and low power consump-

tion

• Beam Angle 6°, Outstanding sharp BEAM eect
and remarkable wash eect with pure color
mixing and focus Function

• High light output, 14020LUX@5M at White light

• Temperature protect function, when the internal

temperature is up to 40° and then the fans be­gin to work, when the internal temperature is up
to 70° and the brightness reduce half.

• Color Wheel: 7 colors +white, rotation with va­riable direction and speed

• 1 static Gobo Wheel: 8 gobos +white, wheel
rotation and shake

• 1 Rotate Gobo Wheel: 6 gobos +white, wheel
rotation and shake

• Prism: 8-facet Prism, bi-directionally rotatable at
variable speeds

• High speed strobe eect with 1-25 ashers per
second

• Internal program available

• 16/14/12/10 DMX Channels USITT DMX-512

• DMX 512, master-slave and sound activated

controllable or auto operation

• Specic computer control software as optional

• Colorful LCD display

• Ecient low noise fan cooling system

• POWERCON IN/OUT

• 3-pin XLR connectors IN/OUT

• Two 1/4 turn fastening Omega Clamps

• IP 20 protection rating

3.1 Features

3.2 Specications

• Input Voltage: AC90-260V 50/60Hz

• Light Source: 150W High Output White LED

• Control Signal: DMX 512, master-slave and

sound activated or auto operation

• Control Channel: 16/14/12/10 DMX Channels
USITT DMX-512

• Power Consumption: 250W

• Dimensions: 270(D) x 270(W) x 470(H)mm

• Packing Dimensions: 305(D) x 305(W) x 500(H)

mm

• Net Weight: 10.6kg, Gross Weight: 12.6kg