ELAN Lighting CAB-5R-BEAM User Manual

CAB-5R-BEAM

Thank you for purchasing the CAB-5R-BEAM. Every suit has been thoroughly

tested and shipped in perfect condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears to be

damaged, carefully inspect your unit for any damage and be sure all accessories

necessary to operate the unit has arrived intactly. In the case damage has been

found or parts are missing, please contact Acson Comercial or your local supplier

for further instructions. Do not return this unit without any warning.

USER’S MANUAL

2

Contents

FOR YOUR OWN SAFETY, PLEASE READ

THIS USER MANUAL CAREFULLY BEFORE

POWERING OR INSTALLING. SAVE IT FOR

FUTURE REFERENCE

1. Safety Precautions ................................................................................................................. 3

2. Before you start ...................................................................................................................... 4

DMX Linking
Power Supply Mains
Mounting Bracket
Opertating Modes
LCD display and button

3. Menu operation ....................................................................................................................... 6

4. DMX Chart ............................................................................................................................... 6

5. Cleaning ...................................................................................................................................9

6. Troubleshooting ......................................................................................................................9

7. Specications ......................................................................................................................... 9

3

1. Safety Precautions

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void
your manufacturer warranty. In the unlikely event your unit may require service please contact the manufac­turer or your dealer.

Please recycle the shipping carton whenever possible.

• Be sure that the local power outlet match that of
the required voltage for your unit,

• Do not attempt to operate this unit if the power
cord has been frayed or broken. Do not attempt
to remove or break off the ground prong from
the electrical cord. This prong is used to reduce

the risk of electrical shock and re in case of an

internal short.

• Disconnect from main power before making any
type of connection.

• Do not remove the cover under any conditions.
There are user serviceable parts inside.

• Never operate this unit when its rear cover is
removed.

• Never plug this unit into a dimmer pack.

• Always be sure to mount this unit in an area
that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes
damaged.

• During long periods of non-use, disconnect the
units main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to the point they exit from the
unit.

• Cleaning unit should be cleaned only as recom-

mended by the manufacturer. See ‘Cleaning” for

details

• Heat –The appliance should be situated away
from heat sources such as radiators, heat re­gisters, stoves, or other appliances (including

ampliers) that produce heat.

• The unit should be serviced by qualied service
personnel when:

• The power-supply cord or the plug has been
damaged.

• Objects have fallen, or liquid has been spilled
into the appliance.

• The appliance has been exposed to rain or
water.

• The appliance does not appear to operate nor­mally or exhibits s marked change in performan­ce.

! !

Avoid electric

shock

Avoid res: high

temperature of

bulb