THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
Introduction
Congratulations and thank you for purchasing ELAN TheaterPoint
speakers. The TheaterPoint speaker line has been designed specifi cally to match the needs of dedicated Home Theater and critical
listening areas within the home. Using state-of-the-art materials like
woven Kevlar fi ber cones, neodymium magnets, and aluminum phase
plugs each speaker seamlessly reproduces movie soundtracks and
music with the clarity and precision demanded in today’s multi-channel environments. Advanced features such as three-way EQ switches,
bass limiting circuits, custom Q crossovers, and pivoting tweeters allow fl exibility and customization for virtually any circumstance where
accurate audio reproduction is paramount.
TheaterPoint speakers have been designed as a family. Each speaker
complements the others. All use similar components to create a
coherent audio experience no matter what the content. TheaterPoint
speakers are also designed to provide custom solutions for virtually
any multi-room environment. In-wall, in-ceiling, on-wall, and freestanding speakers combine to create the exact setup that each home
requires. No matter which combination is appropriate, TheaterPoint
speakers provide sonic accuracy and reproduce all audio sources to
ELAN’s exacting standards.
Specifi cations
THP525LS
System Type ....................................... 2 Way Acoustic Suspension, Dual Woofer
w/ Pivoting Tweeter
Woofer
Cone ................................... 2 X 5.25" Woven Kevlar w/Aluminum Phase Plug
ELAN HOME SYSTEMS INSTALLATION MANUAL THP525LS/THP650LS
Installation
The Installation process is divided into two distinct processes:
Wiring
Mounting
After carefully considering the intended application (defi ning a
Listening Area, Home Theater/Stereo, etc.) specifi c mounting
locations can be decided upon. Once the specifi c locations are
determined, installation can commence.
Wiring
Before actually running any wire or cable, take the time to look around
each room or area of the house and plan your wire paths for maximum effi ciency. Look for routes through uncluttered parts of the stud
wall or ceiling that allow you to group all low-voltage wires wherever
possible. It is a good practice to label both ends of all cables and to
protect wires by tying a plastic bag over the ends.
Plastic BagLabel
REAR
LEFT
SPK
Note 1: Low voltage wiring must be run in accordance with the Na-
tional Electrical Code as well as any other applicable provisions of the
local building codes in your area. In some cases (such as commercial
installations), running the wire in conduit may be required. If you have
any questions concerning the wiring of speakers in your home, contact your local building and inspection department.
Note 2: It is recommended that you use quality CL-2 or CL-3 rated
stranded speaker wire when installing ELAN TheaterPoint speakers.
Solid-core “Romex” type wire is not acceptable! Use at least 16AWG
speaker wire for runs up to 100 feet, and at least 14 AWG speaker
wire for runs up to 200 feet. If you must cross high-voltage lines,
always do so at a 90 degree angle to avoid audible hum through the
speakers!
THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
Wiring (cont’d.)
When pre-wiring for a Home Theater, run 14-16AWG stranded speaker wire from the equipment location (head-end) to each speaker
location. Use speaker wall plates in the listening room as termination
points and use ELAN PSP6 or PSP12 Precision Panels for neat and
accurate speaker wire management at the head-end equipment
location.
Note: When pre-wiring for a Home Theater, it is essential to make
direct wire runs from the head-end to each speaker. Do not run
speaker wires in series or parallel, and do not “daisy-chain” speakers
to common wiring.
Bannana
Plug
To
THP525LS/650LS/
650SS
SPK IN
Front
Rear
Bannana
Plug
12-16 AWG
Stranded
Speaker Wire
Speaker
Wall Plates
Bannana
Plug
Rear
Front
Bannana
Plug
To
Home Theater
Receiver
SPK OUT
WARNING: Do Not Run Speaker
Wires Through Holes Shared
By High-Voltage Wiring!
There are instances where TheaterPoint speakers will be connected
directly to an amplifi er. Use a high quality speaker cable of equal
lenghth for each Left and Right speaker directly from the amplifi er
to each speaker. The use of spade lugs or bannana plugs is recommended.
ELAN HOME SYSTEMS INSTALLATION MANUAL THP525LS/THP650LS
Mounting
There are typically two situations that can exist when mounting cabinet Home Theater speakers:
Wall Mount
Shelf or Speaker Stand
Wall Mount
Speakers should be placed slightly above ear level when situated in
the listening area, or pointed slightly downward when mounted higher.
Note: ELAN THP525LS and THP650LS TheaterPoint speakers are
compatible with OmniMount 30.0 Series speaker mounts. Please
see the instructions included with the speaker mounts for specifi c
information.
Shelf or Speaker Stand
Make sure that speaker wires are free from obstructions or sharp
bends. When placing speakers on stands or in open areas, ensure
that the speaker wires do not cause a tripping hazard.
THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
Pointing Speakers
TheaterPoint speakers are specifi cally designed to produce outstanding audio quality when properly placed in relationship to the listening
area. Human hearing relies on mid-range and high frequencies to
determine spatial direction (where a sound is coming from). Midrange and high frequency drivers (tweeters) tend to produce narrow
soundfi elds that sound much better when pointing directly at the
listener whereas low frequency drivers (woofers) envelop much larger
areas and tend to be more omnidirectional. The tweeter can be fi netuned using ELAN’s exclusive TheaterPointer Laser Pointing Device
for pinpoint sonic accuracy in Home Theaters and critical listening
applications.
Pointing the Tweeter
All TheaterPoint speakers include ELAN’s exclusive TheaterPointer
Laser Pointing Device for precise tweeter adjustment. Because the
human ear relies heavily on high frequencies to locate sound, and because high frequency drivers create a narrow soundfi eld, it is important to align tweeters precisely. Stereo imaging and surround sound
effects and dialogue are greatly improved by pointing the tweeter
correctly.
To Correctly Point the Tweeter:
1. Move the tweeter so that
it points toward the
desired listening position.
2. Turn TheaterPointer on by
pressing the power button.
3. Place the TheaterPointer
into the triangular hole
located on the tweeter’s
protective cover. Notice
the red beam of light
emanating from the
TheaterPointer.
THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
Setting Switches
Once the speakers are wired, mounted, and positioned correctly, use
the EQ switches to fi ne-tune the speakers based on local environmental variables such as hardwood fl oors, thick draperies, etc. The
two EQ switches are labelled “EQ” (Equalizer) and “BASS”. The EQ
switch compensates for the “liveness” or “deadness” of the room
while the BASS switch cuts bass by aproximately - 20dB.
EQ Switch
Select the W (Warm) position on the EQ switch to compensate for
“live” rooms where sound bounces and refl ects from hard surfaces
like tile or hardwood fl oors, large glass surfaces/windows, stone or
brick walls, etc. Select the B (Bright) position to compensate for
“dead” rooms where sound is absorbed by soft materials like heavy
drapes, thick carpeting, upholstered furniture, etc. Use the N (Neutral)
position if no compensation is required.
BASS Switch
Select the + position for normal bass operation if the speaker is used
full-range without a subwoofer. Select the 0 position to reduce bass
frequencies by aprox. 20dB. The 0 option is designed to protect the
the speaker during high volume operation and should only be used
when a subwoofer is present in the system.
ELAN HOME SYSTEMS INSTALLATION MANUAL THP525LS/THP650LS
Applications
All TheaterPoint speakers have similar “voices” designed to work
together to create a seamless, high-quality Home Theater or critical
listening experience. ELAN strongly recommends installing TheaterPoint speakers in matched groups (Left, Center, Right, Rear, Sub) in
order to preserve the acoustic integrity of the source material. The
following section describes each TheaterPoint speaker in appropriate
applications with other TheaterPoint speakers.
Stereo
Certain TheaterPoint speakers lend themselves very well to stereo
critical listening applications. Please keep in mind that a defi ned
stereo listening area must be present in order to acheive maximum
benefi t from stereo placement.
ELAN HOME SYSTEMS INSTALLATION MANUAL THP525LS/THP650LS
Home Theater
It is essential to use voice-matched speakers in any Home Theater
application. Sound emanates from each speaker in turn, and all
should sound the same. TheaterPoint speakers satisfy this requirement perfectly, and should be used in combinations shown in the
following section.
Center Channel Positioning
A center channel speaker should be placed as close as possible to
the video display utilized in a Home Theater. In-wall center channel
speakers should be mounted immediately above or below the screen
as shown below. If using a cabinet speaker like ELAN’s THP525LS or
THP650LS as a center channel, position it on a stand immediately below the screen. A Center Channel speaker can also mount on a shelf
above the screen - possibly in a cabinet or entertainment center.
THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
Subwoofer Positioning
Subwoofers are considered to be omnidirectional. They produce low
bass frequencies that are not especially localized. The human ear
does not rely on these frequencies to place sounds in space therefore, placement is not as important as with other types of speakers.
Place subwoofers along the front wall of the room approximately 2-3
feet from the corners. Expect a 3-9dB bass boost if the subwoofer is
placed directly in the corner of a room (called “corner loading”). It is
usually not advisable to place subwoofers directly next to the seating
position in a Home Theater.
TV
2-3 Feet
THP1200SW
Subwoofer
Subwoofers May Be
Placed on Either
Side of Screen
THP1200SW
Subwoofer
X
Not
Recommended
Multiple Subwoofers
It is sometimes desirable to install multiple subwoofers for increased
bass response in a Home Theater. Place the subwoofers equal distance from the screen in similar locations as shown below.
THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
6.1/7.1 Surround Sound
6.1 and 7.1 surround sound systems utilize additional rear and/or rear
side speakers to enhance the audio effects contained in a soundtrack.
Any of the previous examples can easily become a 6.1 or 7.1 system
by changing the confi guration of the rear channels. The diagrams in
this section show rear and side rear speakers only!
6.1 Systems
Typical 6.1 systems use two rear side speakers with a center rear
speaker. Several logical combinations can be created using TheaterPoint speakers as shown in the following examples.
THP800C - In-Ceiling Rear
THP800C
THP650D - In-Wall Rear Side
THP525W - In-Wall Rear Center
THP650SS - On-Wall Rear Side
THP525W - On-Wall Rear Center
THP525LS/THP650LS INSTALLATION MANUAL ELAN HOME SYSTEMS
7.1 Systems
Use a total of four speakers for rear Surround effects when confi guring 7.1 systems. Several logical combinations can be created using
TheaterPoint speakers as shown in the following examples.
ELAN HOME SYSTEMS, L.L.C. (“ELAN”) warrants to the original retail purchaser that THP525LS and THP650LS speakers and speaker
brackets are free from defects in materials and workmanship,
provided that the product was purchased from an authorized ELAN
Home Systems Dealer.
If the above purchaser discovers such item was not as warranted
above and promptly notifi es ELAN writing, ELAN shall repair or
replace the items at the company’s option. This warranty shall not
apply (a) to equipment not manufactured by ELAN, (b) to equipment which shall have been installed by other than an authorized
ELAN installer, (c) to installed equipment which is not installed to
ELAN’s specifi cations, (d) to equipment which shall have been
repaired or altered by others than ELAN, (e) to equipment which
shall have been subjected to negligence, accident, or damage by
circumstances beyond ELAN’s control, including, but not limited to,
lightning, fl ood, electrical surge, tornado, earthquake, or any other
catastrophic events beyond ELAN’s control, or to improper operation, maintenance or storage, or to other than normal use of service.
With respect to equipment sold by, but not manufactured by ELAN,
the warranty obligations of ELAN shall in all respects conform and
be limited to the warranty actually extended to ELAN by its supplier.
The foregoing warranties do not cover reimbursement for labor,
transportation, removal, installation, or other expenses which may
be incurred in connection with repair or replacement.
Except as may be expressly provided and authorized in writing by
ELAN, ELAN shall not be subject to any other obligations or liabilities whatsoever with respect to equipment manufactured by ELAN
or services rendered by ELAN.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER EXPRESSED AND IMPLIED WARRANTIES EXCEPT
WARRANTIES OF TITLE, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
P/N9900714 REV:C
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.