Elan Hardware Co HC-600 Operating Manual

1

©ELAN (Changzhou) Hardware Co. Ltd.

Version 2.1, September 2012

HC-600

Model ODG V1 / V3

ON DEMAND COFFEE GRINDER

Designed in EU. Produced in China by Elan (Changzhou) Hardware Co. Ltd

Building #6, #2 Tenglong Rd, Wujin Economic Development Zone, Jiangsu, 213161 China

2

©ELAN (Changzhou) Hardware Co. Ltd.

Version 2.1, September 2012

WARNINGS

1 This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
2 Children should be supervised to ensure that they do not play with the appliance.
3 Care is needed when handling cutting blades during cleaning.
4 If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this product
for environmental safe recycling.

Warranty Information

The manufacturer provides warranty in accordance with the legislation of the customer's own country of
residence, with a minimum of 1 year (Germany: 2 years), starting from the date on which the appliance is sold to
the end user.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service centre. When making a claim under
the warranty, the original bill of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of:
Normal wear and tear Incorrect use, e.g. overloading of the appliance, use of non approved accessories Use of
force, damage caused by external influences Damage caused by nonobservance of the user manual, e.g.
connection to a nun suitable mains supply or non compliance with the installation instructions Partially or
completely dismantled appliances

3

©ELAN (Changzhou) Hardware Co. Ltd.

Version 2.1, September 2012

TABLE of CONTENTS

1) Preface………………………………………………….…………………………………………….4.

2) Technical Specifications …….………………..………………………………………………4.

3) General Description …………………………..…………………………………………..……4.

4) Unpacking and installation ……………..…………………………………………………..5.

5) Operation (V1 models) ………………………………………..………………………………6.

6) Operation (V3 models) ……………………………………..…………………………………8.

7) Accessories…………………………………………………….…………………………………10.

8) Safety devices………………………………………………..………………………………….12.

9) Safety instructions………………………………………………………………………….….12.

10) Maintenance and service………………………………….……….…………………….13.

11) Cleaning………………….……………………………………………………….……………….13.

10)Remarks and important details….……………….…………………….……………….16.

4

©ELAN (Changzhou) Hardware Co. Ltd.

Version 2.1, September 2012

1) PREFACE

Congratulations for purchasing the HC-600 On Demand Grinder (ODG). The HC-600 is a commercial appliance to be
used in coffee shops, espresso bars, hotels, restaurants, and so on. HC-600 will grind whole been coffee into
variable, user selectable (from super fine to course) coffee powder and will dose a pre-defined (on V1 models)
dose to your espresso machine filter holder. Read this manual from cover to cover before using the appliance as it
contains important instructions for the safety, operation, and maintenance of the appliance. Keep the manual in a
reachable place for future use and reference. The manufacturer reserves the right to modify from time to time the
appliance and the manual accordingly.

2) TECHNICAL SPECIFICATIONS HC-600

3) General Description Model V1

Dimensions:
Height: 560mm
Width: 210mm
Length: 330mm
Weight: 15Kg
Burrs diameter: 64mm
Hopper capacity: 1200gr. Coffee beans
Electrical Specifications:
230V/50Hz or 110V/60z or 220V/60Hz (as marked)
Power: 350w
Duty Cycle: 50%
Grinding capacities: 6-9Kg/hour

Bean hopper door

Powder outlet lid

Powder outlet

Espresso filter handle support

Program dial (V1)

Residue tray

Bean hopper lid

Bean hopper

Hopper Safety screw

Grinding dial

Grinder body

LCD display and counter mode
selector (V1)

Working mode selector (V1)

5

©ELAN (Changzhou) Hardware Co. Ltd.

Version 2.1, September 2012

4) UNPACKING AND INSTALLATION:

Warning: All appliances’ technical handling operations such as installation, maintenance, or service
should be performed by certified personnel or by your local dealer.

• After opening the box, make sure that the appliance is intact and that there is no visible damage. If there is
any doubt, DONOT use the appliance and call your local dealer for further assistance.

• Unpack the carton box carefully. For your convenience we suggest storing all packaging materials where they
can be used in the future, whenever the appliance’s transportation is necessary.

• Place the grinder on a stable flat counter in a dry area away from water or water splashes.

• Position the coffee residue tray underneath the body in front of the appliance.

• Install the beans hopper firmly on top of the body inside the top blade holder.

• Fasten the hopper to the appliance body by means of the supplied screw. (fig.4.1) Make sure that the screw is

inserted completely through both holes in the hopper and in the top blade holder.

Fig4.1

• NEVER OPERATE THE GRINDER IF THE BEAN HOPPER IS NOT FULLY SECURED IN ITS POSITION.

• Before plugging in the electrical cord, make sure:

o The appliance voltage and frequency rating (according to the bottom cover label) is the same as the

supply mains.

o The wall socket is fitted with an efficient ground contact. DONOT plug the appliance into the supply

mains if the ground system was not positively checked to be in compliance with current safety rules.
IT IS COMPULSORY TO GROUND THE APPLIANCE. The manufacturer can not be held responsible in
the event that this regulation is not complied with.

o The power consumption of the appliance (according to the backside label) is consistent with the

relevant wall socket capacity.

o The wall socket is protected against short outs and power surges.
o Do not use extension cables, plug adapters for multiple sockets, or make shift connections.

• Plug in the appliance.

• Upon first time operation, and before placing beans into the hopper, VISUALLY check that the blade rotation

direction is clockwise by switching the appliance ON for a short while.

• Should the rotation direction be wrong, do not use the appliance and contact your local dealer for further
instructions.