Elan ViA 2-8.4 User Manual

Revision A

© ELAN Home Systems 2006 • All rights reserved. i

Purpose of This Manual

This manual provides step-by-step installation instructions and connec­tion examples, along with basic user information for installation and ongo­ing use of the VIA

®

!2-8.4 Wireless 8.4” Color LCD Touch Panel. This

manual is written for the user of this equipment.

Organization

The following information is contained in this manual:

Certifications

Compliance Certifications

The VIA!2-8.4 computing device and any similarly-branded peripherals are
subjected to testing and quality controls to ensure that the devices will
perform as set forth in the published specifications. All VIA!2-8.4 devices
have been tested and designed to comply with the identified information
technology standards.

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,

Chapter 1 Provides an introduction to ELAN Home Systems’

VIA!2-8.4 Wireless 8.4” Color LCD Touch Panel,
along with a system description, system features
and system specifications. Describes the VIA!2-8.4
Wireless 8.4” Color LCD Touch Panel front & rear
panel controls and indicators, using the desktop
cradle and turning the touch panel ON or OFF. Also
provides motif style and button layout for the ELAN
user interface.

Chapter 2 Provides step-by-step instructions for setting the

the VIA!2-8.4 Wireless 8.4” Color LCD Touch Panel
timeouts, volume & brightness, screen calibration,
and battery power management.

Chapter 3 Describes the ELAN Network, gives a brief descrip-

tion of the VIA!2-SS1 System Station, & VIA!SC4
Four Port System Controller.

Preface

PREFACE VIA!2-8.4

ii © ELAN Home Systems 2006 • All rights reserved.

including interference that may cause undesired operation. To identify this
device, refer to the part, series, or model number on the product.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference with radio communica­tions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer­ence as follows:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Plug the equipment into an outlet on a circuit different from the
one connected to the receiver.

• Consult the dealer or an experienced radio or television techni­cian

CE (EU) Declaration of Conformity

This product conforms to the essential protection requirements of the
European Council Directive 89/336/EEC that relates to electromagnetic
compatibility, EN55022:1998, Class B; and EN61000- 3-2, 3-3, 4-2, 4-3, 4­4, 4-5, 4-6, 4-8, and 4-11.

Modifications

The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by device provider
can invalidate FCC approval.

Acknowledgements

Windows and Windows CE are registered trademarks of Microsoft Corpo­ration. AMD is a registered trademark of AMD Corporation. All other trade­marks and registered trademarks are property of their respective
corporations.

VIA!2-8.4 PREFACE

© ELAN Home Systems 2006 • All rights reserved. iii

Safety Summary

Please review the following material carefully. Failure to follow the instruc­tions or failure to heed the warnings contained herein could lead to seri­ous injury.

CAUTION: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
the instructions. Failure to comply may result in serious
injury.

Special Battery Cautions

The following are special precautions you should take when using and
handling batteries.

• Do not expose batteries to direct sunlight or extreme heat

• Do not submerge batteries in liquid

• Do not incinerate batteries

• Do not handle damaged or leaking battery packs

• Do not attempt to discharge batteries by short-circuiting them

• Do not attempt to charge batteries with a charger other than one
approved for use with the VIA!2-8.4

• Do not leave or operate the VIA!2-8.4 or VIA!2-8.4 batteries in an
excessively hot environment such as a closed vehicle under hot
sunshine or beside a fire, heater, or blow dryer. Do not leave the
VIA!2-8.4 exposed to excessive heat for any period of time.
Excessive heat exposure may result in melting, or cause the elec­tronics/battery to overheat resulting in fire.

• Use only the supplied batteries and AC Adapter. Failure to follow
this instruction may result in battery burst or liquid leak, and may
cause fire, or injury.

• Store and Dispose of all batteries in accordance with the instruc­tions contained herein. Never dispose of the battery by burning.
Any such action may result in excessive heating, explosion, or fire.

• Do not disassemble, modify, puncture, or strike any battery with
force or allow batteries to become wet. Any such action may
result in excessive heat, explosion, or ignition.

• If at anytime the VIA!2-8.4 batteries should smell, heat up,
become discolored, leak fluid, change shape, or experience an
abnormal occurrence, remove the battery from the VIA!2-8.4 and
do not use it.

• Should leaking fluid from the battery make contact with skin, eyes
or clothes, flush immediately with water. If there is contact with
eyes, seek medical treatment immediately. Failure to follow these
instructions may result in skin rash or significant eye damage.

PREFACE VIA!2-8.4

iv © ELAN Home Systems 2006 • All rights reserved.

CAUTION:

Replace only with the same type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions.

Rechargeable Lithium-ion Battery Disposal

Unwanted lithium-on battery packs may be returned to the battery manu­facturer for disposal.

Caring For the VIA!2-8.4

To clean the VIA!2-8.4’s screen, first use a soft dry cloth to remove con­tamination. If dirt is still present, use a damp cloth that has been squeezed
of excess water. If dirt is still present, spray a non-abrasive very mild or
highly diluted glass cleaning solution on to a damp cloth and re-clean. Do
not spray directly on the panel screen. Use of strong chemicals and/or
some cleaning agents may discolor the polyester film that makes up the
touch screen.

It is important to properly care for your VIA!2-8.4 wireless panel. Follow
these guidelines to ensure your device is preserved and protected.

• Avoid scratching the screen by always using the supplied stylus
or a plastic-tipped pen intended for use with touch sensitive
screens.

• Do not expose the VIA!2-8.4 to rain, liquids or moisture for an
extended period of time.

• Do not expose the VIA!2-8.4 to temperature extremes.

• Do not place any objects on top of the VIA!2-8.4 to prevent screen
damage.

Operating Temperatures & Environments

• Operating Temperature: 32-104°F (0-40° C)

• Humidity: 0-90%

Precautions

• Always exercise care when operating and handling the VIA!2-8.4.

• Do not apply excessive pressure to the display screen.

• ELAN strongly recommends that you do not touch the display
screen directly with your fingers. Oil from your fingertips may be
difficult to remove. Please use the stylus provided.

• Avoid exposing the panel screen to direct sunlight or other heat
source. Where possible, the VIA!2-8.4 should be facing away from
direct lighting to reduce glare.

• DO NOT use any 12 VDC adapter other than the one provided with
the device or acquired from the manufacturer or its distributors, to
recharge or power the touch panel.

VIA!2-8.4 PREFACE

© ELAN Home Systems 2006 • All rights reserved. v

• In the unlikely event that smoke, abnormal noise, or strange odor
is present, immediately power the VIA!2-8.4 off. Please report the
problem to your device provider immediately.

• Never attempt to disassemble the VIA!2-8.4. You will lose any
product warranty on the VIA!2-8.4.

Package Contents

• VIA!2-8.4 (with internal Battery Pack) and Stylus

• Protective Jacket

• 12 VDC Power Adapter

• Desktop Cradle/Recharging Station

• Power Cord (USA Type)

VIA!2-8.4 Power Source

The primary sources of VIA!2-8.4's power are the internal and optional
external battery packs. A DC-in jack connects the 12 VDC adapter with the
VIA!2-8.4 to recharge the battery pack. Both the VIA!2-8.4 and the charg­ing cradle are equipped with a DC-in jack. The 12 VDC adapter can be
connected directly to the VIA!2-8.4 for charging and operation or con­nected to the cradle so the battery packs may charge and the unit oper­ates while the VIA!2-8.4 is docked in the cradle. Follow all precautions
listed in this manual when using, charging or disposing of batteries.

CAUTION:

Severe personal injury and equipment damage can result by not
following proper charging procedures. Recharge the panel using only
the 12 VDC adapter designated for the VIA!2-8.4.

VIA!2-8.4 Display Screen

The VIA!2-8.4's specially enhanced display screen makes it the premium
choice in wireless displays. It provides SVGA (800x600) resolution on a
high brightness transmissive display with touch screen, while keeping
power draw to a minimum. The stylus for the VIA!2-8.4's touch screen is
located in the upper right corner of the panel.

PREFACE VIA!2-8.4

vi © ELAN Home Systems 2006 • All rights reserved.

Read information

- All the safety and operating information should be read prior

to equipment operation.

Follow information

- All operating and use information should be followed.

Retain information

- All safety and operating information should be retained.

Heed Warnings

- All the warnings on the equipment and operating instructions

should be heeded.

Ventilation

- The equipment should be situated so that its location or position
does not interfere with proper ventilation. This equipment should never be placed
near a heat source. This equipment should not be placed in a cabinet that might
impede the flow of air through the ventilation openings.

Non-Use Periods

- Equipment that is left unattended and unused for long peri-

ods of time should be de-energized.

Power Sources

- The equipment should be connected to a power supply of the

type described in the in this manual or as marked.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instruction in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INFORMATION

VIA!2-8.4 CONTENTS

© ELAN Home Systems 2006 • All rights reserved. vii

Table of Contents

Chapter 1 VIA!®2-8.4 Wireless 8.4” Color LCD Touch
Panel

Introduction ...........................................................................................1-1

Touch Screen Technology ...........................................................1-2

Features ..........................................................................................1-2

Specifications ................................................................................1-3

Accessories ....................................................................................1-4

Operation ...............................................................................................1-5

Panel Buttons & Features ............................................................1-5

Control Surfaces ........................................................................1-7

Message Bar ..............................................................................1-9

Desktop Cradle ............................................................................1-10

12 VDC Adapter .......................................................................1-10

Screen Time-Outs & Battery Management ..............................1-11

Time-Outs ................................................................................1-11

Battery Conservation Tips ......................................................1-11

Battery Deep Discharge State ................................................1-12

Good Tips To Know ................................................................1-12

Screen Cleaning Information ..................................................1-13

CONTENTS VIA!2-8.4

viii © ELAN Home Systems 2006 • All rights reserved.

Table of Contents (Cont’d)

Chapter 2 VIA!2-8.4 Wireless Touch Panel System Set­up

Introduction ...........................................................................................2-1

Volume and Brightness Settings ..............................................2-3

Calibrate Screen ........................................................................2-4

VIA!2-8.4 Touch Panel Time-outs .............................................2-6

Installer Setup ................................................................................2-7

Battery & Power Management ....................................................2-7

Low Battery Condition ..............................................................2-8

Chapter 3 The ELAN Network

Introduction ...........................................................................................3-1

VIA2-SS1 System Station ..........................................................3-1

Router ........................................................................................3-1

Wireless Access Point ...............................................................3-1

Limited Warranty ..................................................................... Back Page

© ELAN Home Systems 2006 • All rights reserved. 1-1

Chapter 1: VIA!®2-8.4 Wireless 8.4” Color LCD

Touch Panel

Introduction

The VIA!®2-8.4 is a wireless 8.4” color LCD touch panel remote control for
the ultimate in home theater control and local zone control. The VIA!2-8.4
Wireless 8.4” Color LCD Touch Panel provides the freedom to control your
home theater A/V, along with lighting, drapes, blinds and even tempera­ture control from anywhere in your home theater using standard 802.11b/g
WiFi wireless networks. It is incorporated into your home theater solution
using a router, a wireless access point (WAP) and an ELAN VIA!2-SS1 Sys­tem Station. As of this writing, an ELAN VIA!-SC4 System Controller would
be required for 2-way RS-232 feedback and control.

Figure 1-1 VIA!2-8.4 Wireless 8.4” Color LCD Touch Panel

VIA!2-8.4 graphics are designed to operate similarly to ELAN’s award win­ning VIA! family of products. Its specially enhanced display screen makes
it the premium choice in wireless displays, providing SVGA (800x600) res­olution on a high brightness transmissive display with touch screen, while
keeping power draw to a minimum.

The VIA!2-8.4 Wireless Touch Panel sits in a desktop cradle for support
and charging.

On the desktop cradle, you will find the following interfaces: a DC-in jack
for the 12 VDC adapter, two USB ports for keyboard and mouse input, (for
future applications).