Elan PSD-67-IP-WIRELESS User Manual

PSD-67-IP-WIRELESS

(6IN1)

Thank you for purchasing our PSD-67-IP-WIRELESS (6in1) lighting. Please read these

instructions carefully before you begin and operate the fixtures according to these

instructions to avoid any possible damages and accidents causes by misuse.

USER’S MANUAL

32

1. Summary ........................................................................................ 3

2. Safety instructions .......................................................................... 3

3. Outside size picture ........................................................................ 4

4. Main function ..................................................................................4

5. DMX control function ......................................................................5

6. Display operation instruction ........................................................... 9

7. Menu instruction .............................................................................. 9

8. Charging and power instruction ...................................................... 12

9. Operating control instruction ........................................................... 12

10. XLR connection instruction ........................................................... 13

11. Cable connecting draft ................................................................... 14

12. Trouble shooting ............................................................................ 14

13. Technical specification .................................................................. 15

Index

1. Summary

2. Safety Instructions

FOR YOUR OWN SAFETY, PLEASE READ

THIS USER MANUAL CAREFULLY BEFORE

POWERING OR INSTALLING. SAVE IT FOR

FUTURE REFERENCE

Enquire with skilled technicians before any repair.

Always make sure you disconnect from the power source

before setting up, serving and moving.

Avoid direct eye exposure to the fixture when it is on.

It adopts high power 6-in-1 LED, which refers to single LED is made of R,G,B,A,W,UV LED, And
long life span, low consumption, good color mixing effect and high brightness are the most promi­nent features. Each kind of LED can be independently dimmed. The built-in program includes dim­ming, strobe, eotic, gradual change, fading and so on. It uses lithium battery power supply, stable
capability and easy to carry. International standard DMX 512 signal is requested.

• PSD-67-IP-WIRELESS (6in1) light

• DMX signal cable 1 Set

• Power cable 1PC

• The User Manual

• Warranty Card

• Make sure the power supply voltage are consistent with this lights. Ensure the use of voltage is
in the range of the request technical parameter.

• Before the installation, please check the light’s fasteners and mechanical structure have been
received in good condition and appear no damage.

• This light is designed for indoor use, working temperature is lower than 40 degree.

• The fixtures maybe mounted in any position provided there is adequate room for ventilation.
Make sure there are no inflammable and explosive items(ornaments) in 0.5 meters away.

• Yellow / green cabling earthling safety; no flicker when the fixture is working on.

Precautions

Products introduction

Packing list

54

3.Outside picture

4. Main Function

5. DMX Control Function

• High quality led: low consumption, high brightness, stable capability and long life

• Each color of led with 32-bit, 16666 grades dimming. Rgbwuv color mixing

• Dim 0%-100%, strobe, gradual change, jumping change and etc

• Dmx512 controller: 4 button set dmx id address with led display

• Use touch button technology

• Power charge indication

• Auto run /master slave/interconnected multi-machine control

• Wdmx wireless controll, high stable wireless module

• Electric quantity display

• Lithium battery power supply, stable capability and easy to carry

• Built-in temperature controlled measurement function, when overheated, intelligent reduce led
output power.

• Output mode optional

• Ip65

• Lens degree: 25º, 45º optional

• Output mode: H(100%), M(75%), S(50%)

• Dmx control channel optional

DMX Channel (6CH)

DMX Channel (7CH)

Channel

DMX

value

Control Function Remarks

1CH 0-255 R 0-100%
2CH 0-255 G 0-100%
3CH 0-255 B 0-100%
4CH 0-255 A 0-100%
5CH 0-255 W 0-100%
6CH 0-255 UV 0-100%

Channel

DMX

value

Control Function Remarks

1CH 0-255 R 0-100%
2CH 0-255 G 0-100%
3CH 0-255 B 0-100%
4CH 0-255 A 0-100%
5CH 0-255 W 0-100%
6CH 0-255 UV 0-100%

7CH

0-9 Strob off

10-255

Strob speed (1-

20Hz)

76

Recommended

DMX Channel (8CH)

DMX Channel (11CH)

Channel DMX value Control Function Remarks

1CH 0-255 General dimming
2CH 0-255 R 0-100%
3CH 0-255 G 0-100%
4CH 0-255 B 0-100%
5CH 0-255 A 0-100%
6CH 0-255 W 0-100%
7CH 0-255 UV 0-100%

8CH

0-9 Strobe off

10-255

Strobe speed (1-

20Hz)

Channel DMX value Control Function Remarks

1CH 0-255 General dimming

2CH

0-9 Strobe off

10-255

Strobe speed

1-20Hz
3CH 0-255 R 0-100%
4CH 0-255 G 0-100%
5CH 0-255 B 0-100%
6CH 0-255 W 0-100%
7CH 0-255 A 0-100%
8CH 0-255 UV 0-100%

9CH

0-15 dimming
16-18 R
19-21 G
22-24 B
25-27 A
28-30 W
31-33 UV
34-36 R+G
37-39 R+B
40-42 R+A
43-45 R+W

9CH

46-48 R+UV
49-51 G+B
52-54 G+A
55-57 G+W
58-60 G+UV
61-63 B+A
64-66 B+W
67-69 B+UV
70-72 A+W
73-75 A+UV
76-78 W+UV
79-81 R+G+B
82-84 R+G+A
85-87 R+G+W
88-90 R+G+UV
91-93 R+B+A
94-96 R+B+W

97-99 R+B+UV
100-102 R+A+W
103-105 R+A+UV
106-108 R+W +UV
109-111 G+B+A
112 -114 G+B+W
115 -117 G+B+UV
118-120 G+A+W
121-123 G+A+UV
124-126 G+W+UV
127-129 B+A+W
130-132 B+A+UV
133-135 B+W+UV
136-138 A+W+UV
139-141 R+G+B+A
142-144 R+G+B+W
145-147 R+G+B+UV
148-150 R+G+A+W
151-153 R+G+A+UV
154-156 R+G+W+UV
157-159 R+B+A+W
160-162 R+B+A+UV
163-165 R+B+W+UV
166-168 R+A+W+UV
169-171 G+B+A+W
172-174 G+B+A+UV

98

Linear curve

9CH

175-177 G+B+W+UV
178-180 G+A+W+UV
181-183 B+A+W+UV
184-186 R+G+B+A+W
187-189 R+G+B+A+UV
190-192 R+G+B+W+UV
193-195 R+G+A+W+UV
196-198 R+B+A+W+UV
199-201 G+B+A+W+UV
202-204 R+G+B+A+W+UV

205-255

Auto run (bigger

value faster speed)

10CH

0-15 invalid

16-255

Color changing,

bigger value, faster

speed

11CH

0-5 Set by LED display

MODE0-4

MODE0: Linear
curve and not
smooth

MODE1: Linear cur­ve and smooth

MODE2: S-curve
and smooth

MODE3: Inverse
Square law curve
and smooth

MODE4: square law
curve and smooth

6-55

56-105
106-155
156-205

206-255

S-curve: Inverse Square law

curve:

Square law curve:

6. Display Operation

7. Menu Instruction

Charging indicator

Wireless ID

indicator

• MENU : access the menu

• UP: parameter increments

• DOWN: parameters decrease

• ENTER: select the current menu option

Addr –> d001-d512 –> DMX Mode

SLAU –> SLAu –> Slave Mode

CHnd –>

6CH\7CH\
8CH\11CH –>

DMX Channel Mode

nodE –> nod0-nod4 –> DMX Dimming Mode

SP-- –> SP00-SP15 –> built-in program speed

Pr-- –> Pr00-Pr63 –> Buid in program

ASC- –> AC00-AC15 –> Color jumping

MENU

1110

FAdE –> FA00-FA15 –> Gradual changing mode

FLAS –> FL00-FL15 –> White strobe speed

rL-- –> r000-r255 –> Red dimming

GL-- –> G000-G255 –> Green dimming

bL-- –> b000-b255 –> Blue dimming

AL-- –> A000-A255 –> Amber dimming

UL-- –> U000-U255 –> White dimming

uL-- –> u000-u255 –> UV dimming

WDMX –> SET –> Reset WDMX Wireless

OUT –> H, M, S –> Power Output

LED –> ON / OFF

MENU

1. Operating instruction:

2. Details of program built inside

3. Reset WDMX Wireless

MENU (UP/DOWN) + ENTER + (UP/DOWN) + ENTER

Remark: Exp: Select the DMX mode, Here are the operation details:

• Press the MENU, go back to the initial setting

• Press UP/DOWN, display “Addr”

• Press ENTER to change the content, the display will glinting at this moment

• Press UP/DOWN to change the DMX address code to select d001

• Press ENTER to select and store the current menu options. DMX mode will be stored automati­cally and the screen will stop glinting.

Remark: Pr00--- Pr62 R,G,B.W single color or multi-colors lighting
Pr63: Multi colors jumping.
Pr63 can modify the content of SP--,modify the jumping speed.SP00 is the fastest. SP15 is the
slowest
Remark: AUTO63 to adjust Speed. Speed 00 is fastest. Speed 15 is slowest

AUTO LOCK KEY SETTING

1) Press the [ENTER] button in [LED] menu, then enter auto lock key setting.

2) Press the [UP/DOWN] button to select [ON], [OFF]

3) Press the [ENTER] button to escape and save.

Instructions:

When set to [OFF], it will lock automatically after two minutes to prevent accidental triggering flood
flushing. When in the order press MENU->UP->DOWN->ENTER three times to unlock, and the
time between two keys be press down must within 2 seconds.

The Menu on the “WDMX” mode to press ENTER button, display “SET”, keep pressing “ENTER”
over 3 seconds, wireless reset

Exp: Select DMX Channels optional mode, the operation is as below:

• Press MENU, go back to the initial setting

• Press UP/DOWN, display ”CHnd”

• Press ENTER to change the content, the display will glinting at this moment

• Press UP/DOWN to select the DMX channels that you need, 6CH, 7CH, 8CH, 11CH

• Press ENTER select and store the current menu options. DMX mode will be

• stored automatically and the screen will stop glinting.

Exp: Close the display, the operation is as below:

• Press MENU, go back to the initial setting

• Press UP/DOWN, display “LED”

• Press ENTER to change the content, the display will glinting at this moment

• Press UP/DOWN to select “OFF”

• Press ENTER to confirm, the select the working mode that you need. When stop pressing, the
display will display electric quantity after 20 seconds. When display electirc quantity, press any
button 5 seconds to activate the display.

1312

8. Charging and power instruction

9.Operating Control Instruction

10. XLR cable connecting

Charging indicator

When charging, CHARGE display red. full power display green

LCD display electric quantity, when not press any buttons after 20s,automatically jump to the elec­tric quantity indicate mode, at this monent,could display the battery electric quantity. Press any
button over 5s, will back to previous display status; when using this fixture, the Battery power dis­play”p000”,please stop to use, and charging it. And avoid overcharge, charing time is about 4 hours
(Electricity P000 to P100). When display “P100”, keep charging about 30 minutes, then stop char­ging.

Note: PXXX P is battery electric quantity,xxx is the percent of the battery electric quantity

XLR cable:

The standard way of connecting the XLR is: one end connects to the male plug, and the other end

connects to the female. As bellow: pin 1: ground, pin 2: negative signal, pin 3: positive signal

Noted: In order to avoid failures and interference signal transmission, we connect a resistan-

ce120Ω (1/4W) at the end of the DMX connecting as below:

The Conversion between 3 pin and 5 pin XLR

If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable

Master/Slave

• Master setting: The master should be one of following modes: built-in modes, color jumping

Mode, fade mode, strobe mode and RGBW dimming mode. It sends out synchronizing signal.

To avoid the master signal and DMX512 signal from interfering with each other, we should cut

off the DMX512 signal. When the signal cables are longer than 60 meters (32 sets) , a DMX

signal amplifier is necessary.

• Slave setting: It must be in DMX mode, address code is 001 and CHnd is 7 ch to assure recei-

ving the master’s signals correctly. Only one light can be set as a Master and others are slaves.

1514

11. Cable connecting Draft

12. Trouble Shooting

13. Technical Specifications

Problem Checking Way

Can not turn on the light

• Check the power source plug is in normal or not

• Check the switch of the lights is off or on

• Check the fuse if in nor mal

DMX can not control it

• Check the DMX cable is connect to the lights or not

• Check the DMX512 controller work in normal or not

• Check the DMX cable is normal or not

• Check if the lights is in DMX mode (A001)

Display not bright

• When connect to the electricity, did the led flash one time? If so, the power
source is normal; If not, please check if the switch and the transformer has
power out

• Check if the power input of the IC board is normal

• Check if the cable connect to the display loose

• Change the main board to see if it is normal.

• Change the display

LED not light

• Check if the power input of the IC board is normal

• Check if the cable connect to the display loose

• Change the main board to see if it is normal.

• Change the display

Some of the LED not light

• LED is connected by leds in series first, then connect parallel, so please
check if the leds is loose

• Use the multimeter to check if the led is bright or not, of not, please change
the led

• check whether current limiting resistor is normal or not

• Check constant current IC is normal or not (compared with the normal IC)

Single color leds always bright/

not bright

• Check the switch of this color is normal or not

• Change the IC control board

Note: only professional persons can do as above.

• Input voltage: AC 100V-264V/47-63HZ

• Charger output voltage: DC29.4V 2A

• Charging time: about 4 hours

• Consume: 84W

• Lamp Type: LED(12W)

• Lamp Spec: 6-in-1 LED (7PCS)

• Life span: 50000-100000hours

• Constant current driver: 400mA

• PWM Dimmer: >> 400HZ (16666 steps)

• Running hours (with full power): full bri-

ghtness (+/- 6 hours); Gradual change (+/­10 hours);

• Control Signal: wire/wireless DMX512, auto
run

• Control mode: stand alone/ Master and
slave

• DMX channels: 6/7/8/11 CH

• Color effect: R, G, B, A,W, UV mixing

• Beam angle: 25º, 45º optional

• Function Effect: dimmer, strobe, eotic, gra-

dual change, sound activated

• Cooling mode: fan cooling

• Protection rating: IP65

• Anti-electricity intension: 1.5KV

• Insulation Resistance: >2MΩ

• Size: 287.3 x 270.1 x 166.0mm

• Net Weight: 5.2 Kg