Elan PSD-1415-IP User Manual

Page 1
PSD-1415-IP
PAR LED PROJECTOR RGBWA FULL COLOUR
(RED, GREEN, BLUE, WHITE & AMBAR).
Thank you for purchasing our LED PAR. Please read
these instructions carefully before you begin and operate
the fixtures according to these instructions to avoid any
possible damages and accidents caused by mis-use.
Page 2
Features ........................................................................... 3
Safety Instructions ........................................................... 3
Display Menu Instructions ............................................... 4
DMX Instructions ............................................................. 4
Index
PLEASE READ OVER THIS MANUAL
BEFORE OPERATING THE LIGHT
Page 3
3
1. Features
2. Safety Instructions
• Voltage: AC110-240V 50/60Hz
• Power: 210W
• Light Source: 14*15W RGBAW LED
• 4 Operation Modes: Automatic running, DMX, Sound Active, Master/Slave, Wireless
• Control: DMX
- Sound controlled via built-in microphone
- 3CH/5CH/12CH DMX selectable channels
• Packing Size: 26x18x23cm
• Weight: 4 kgs
Safety Notes
• As a skilled technician before any repair.
• Always make sure the power is disconnected from the source before setting up, serving and moving.
• Avoid direct eye exposure to the fixture when it is on.
Safety instructions
• Make sure the power supply voltage is consistent with this light
• Ensure the use of voltage is in the range of the requested technical parameter.
• Before the installation, please check the light’s fasteners and mechanical structure have been received in good condition and appear no damage.
• This light is designed for indoor use; working temperature is lower than 50 degree.
• The fixtures maybe mounted in any position provided there is adequate room for ventilation. Make sure there are no inflammable and explosive items (ornaments) in 0.5 meters away.
• Yellow / green cabling earthling safety; no flicker when the fixture is working on.
Page 4
4
3. Display Menu Instructions
4. DMX Instructions
DMX Channel (3CH)
DMX address ADDR DMX address (0-512
Channel mode CHND 3 CH/ 5 CH/12
Master/slave mode SLND NAST(MASTER)-SLAE(SLAVE)
Show mode SHND
SOUN S1, S2, S3 (Sound mode)
AUTO SP1...SP8 (Auto speed)
FADE SP1...SP8 (Fade speed)
COLO
Colo1...Color31
Menu
R 0--255 G 0--255
B 0--255
W 0--255
A 0--255
Manual dimmer NADL d000--d255
Auto-test TEST R, G, B, W, A, and color mixing
Software ver & fixture
time
V12 0---9999( Fixture time)
Channel Channel values Function
1CH
0-16 Closed
17-255 All dimmer
2CH
0-15 Closed
16-255 Strobe is from slow to fast.
3CH
0 Closed
1-120 Color choose
121-255
Mixed color auto and speed control from slow
to fast
Page 5
5
DMX Channel (5CH)
DMX Channel (12CH)
Channel Channel values Function
1CH
0 Closed
1-255 Red dimmer
2CH
0 Closed
1-255 Green dimmer
3CH
0 Closed
1-255 Blue dimmer
4CH
0 Closed
1-255 White dimmer
5CH
0 Closed
1-255 Amber dimmer
Channel Channel values Function
1CH
0 Closed
1-------255 All dimmer
2CH
0 Closed
1-------255 Strobe is from slow to fast.
3CH
0 Closed
1-------255 Red color dimmer
4CH
0 Closed
1-------255 Green color dimmer
5CH
0 Closed
1-------255 Blue color dimmer
6CH
0 Closed
1-------255 White color dimmer
7CH
0 Closed
1------255 Amber color dimmer
8CH
0------15 Closed
16------255 Choose the mixed color effect
9CH
0 Closed
1------255 Speed for mixed color effect
10CH
0------15 Closed
16------255 Mixed color fade
11CH
0------15 Closed
16------255 Speed for mixed color fade
12CH
0------127 Closed
128------255 Sound control
Recommended
Page 6
Loading...