Elan IRD10, IRD2, IRD4, IRD4Z, IRD6Z Brochure

...

Life Just Got Better

command

IR SYSTEMS

TABLE OF CONTENTS

Introduction ............................................................2

Infrared At-A-Glance ..............................................3

Sensors ....................................................................4

IR Emitters ..............................................................6

IR Distribution ........................................................9

IR Accessories ........................................................11

command

IR Control Solutions for Any Environment

A comprehensive line of Plasma-Friendly

IR Sensors, state-of-the-art Emitters and

IR Distribution solutions that further solidify

ELAN’s prominence as the one-stop-shop for

all your Custom Audio, Video and Home

Automation needs.

New for 2005, ELAN’s 30-piece

IR control product line was

developed to specifically

address today’s broad and

ever-evolving custom

installation needs.

More than ever, today’s home

installations require highly

reliable IR control of a wide

array of audio and video

components. Today’s custom

A/V installations need to

address the issues of plasma

and LCD television emissions as

well as that of ambient and

fluorescent light that can cause

tremendous problems with the

consistent transmission of IR

signals from hand-held remote

controls. And, as more and

more A/V sources are being

added to homes, IR control

signals need to be distributed

to a growing number of sources

within an installation, and

spread throughout many

rooms.

With that in mind, ELAN has

designed each of our IR

Sensors, Emitters and IR

Connection Blocks to faithfully

deliver IR commands

throughout the home, even in

the most problematic

environments.

Regardless of the installation

type, homeowner needs or

budget, ELAN delivers the very

best in reliable home control

and entertainment.

command

The Most Reliable IR Control Solutions for Any Environment

IR SYSTEMS

IR AT-A-GLANCE

PLASMA-FRIENDLY IR SENSORS

Most every room in a home can present numerous challenges to reliable transmission of IR control signals. Ambient light sources (sun or fluorescent lighting) and plasma or LCD TVS can interfere with IR. All ELAN IR Sensors feature a unique filtering system that reduces interference from these sources. These Sensors can be flush-mounted into a wall or cabinet, placed on a shelf or table, or surface-mounted virtually anywhere. There are two Extreme Plasma Sensors that provide reliable IR control under even the most severe Plasma emission situations.

IRS1 Surface-Mount IR Sensor With Plug IRS2 Surface-Mount IR Sensor With Bare Leads IRS3 Flush-Mount IR Sensor With Plug IRS4 Flush-Mount IR Sensor With Bare Leads IRS5 Tabletop IR Sensor With Plug IRS6 In-Wall IR Sensor IRS7EP Extreme Plasma IR Sensor With Plug IRS8EP Extreme Plasma IR Sensor With Bare Leads

IR EMITTERS

ELAN offers a wide variety of Emitters, each designed for highly reliable IR transmission. Each single- or dual-head Emitter comes with a unique docking module that stays in place on the A/V component’s IR window while allowing for easy removal of the Emitter when servicing equipment. An IR-transparent housing allows IR from hand-held remotes to pass through to the component. 8’ leads and a 3.5mm plug are standard on all Emitters. Certain models include an IR Blocking Shield.

IR ACCESSORIES

Important accessories that complete ELAN’s IR Control product line.

IR DISTRIBUTION

ELAN offers a comprehensive line of stand-alone IR Distribution Hubs that accommodate anything from basic IR repeater systems to multi-zone distribution scenarios.

Category Product Name Description

command

IRIC IR Interconnect Cable IRXC 15’ IR Sensor Extension Cable IRYC IR Emitter “Y” Cable PWR2 200mA, 12 Volt DC Regulated Power Supply PWR3 2.1A, 12 Volt DC Regulated Power Supply

IRD2 Passive IR Connection Block IRD4 Amplified IR Connection Block IRD10 Passive IR Emitter Expansion Block IRDKIT IR Distribution Kit IRD4Z 4-Zone In-Wall IR Distribution Block IRD6Z 6-Zone IR Distribution Hub

IRE1 IR Emitter IRE1D Dual IR Emitter IRE2 Talk Back IR Emitter IRE2D Dual Talk Back IR Emitter IRE3 High Output IR Emitter IRE4 Micro IR Emitter

IR SYSTEMS

This sleek-looking miniature IR Sensor can be surface mounted just about anywhere–cabinetry, TVs, walls–you name it. Its unique quad ‘mini’ plug connects to any ELAN IR Distribution Block and provides system status and IR activity feedback to the on-board LEDs.

command

IRS1 PLASMA-FRIENDLY SURFACE-MOUNT IR SENSOR WITH PLUG

The non-retail version of the IRS1, the IRS2 has bare leads instead of a quad ‘mini’ plug, making system connectivity that much easier for the installer.

IRS2 PLASMA-FRIENDLY SURFACE-MOUNT IR SENSOR WITH BARE LEADS

FEATURES

Sleek, miniature surface-mount IR Sensor

Plasma-friendly design

Ambient light filtration

Bare leads for easy system connections

IR activity and system status LED indicators

4-position termination block included

Available in black (IRS2b) and silver (IRS2s)

Non-retail packaging

FEATURES

Sleek, miniature surface-mount IR Sensor

Plasma-friendly design

Ambient light filtration

Quad ‘mini’ plug for quick connection

IR activity and system status LED indicators

Available in black (IRS1b) and silver (IRS1s)

Full-color retail box standard

Just about every room in every house has something in it that can adversely effect the reliable transmission of IR control signals. Ambient light sources, such as compact fluorescent light fixtures (CFL) or sunlight streaming through a window at a certain time of day can interfere with IR transmissions. And, as is well documented, the emissions generated by Plasma television sets can wreak havoc with IR. ELAN’s solution? A complete line of IR Sensors that can be used in any environment! Each and every

ELAN IR Sensor features a unique filtering system that reduces interference from both ambient light sources and Plasma or LCD TVs–and ELAN has a Sensor type for just about every application. ELAN IR Sensors can be flush-mounted into a wall or cabinet, placed on a shelf or tabletop, or surfaced-mounted anywhere you need one. There are even two Extreme Plasma Sensors that were designed to provide reliable IR control under the most severe Plasma emission situations.

PLASMA-FRIENDLY IR SENSORS

+ 9 hidden pages

Elan IRD10, IRD2, IRD4, IRD4Z, IRD6Z Brochure

Specifications and Main Features

Frequently Asked Questions

User Manual