Elan EL-IP-OTF2-SS Quick Start Manual
EL-IP-OTF2-SS
Quick Start Guide
2
www.elanhomesystems.com
QUICK START GUIDE
BEGINNING USING THIS CAMERA
IMPORTANT!!
If you are installing an ELAN Cameras and/or ELAN NVR with an
ELAN Controller, please refer to the “ELAN Surveillance” Integration
Note for setup and software configuration. ELAN Integration Notes
are served through the ELAN tools and on elanhomesystems.com/
dealer-resources. The software configuration information in this
document can be used to extend device control parameters for use
within an ELAN controller environment, or be used to operate this
hardware independent of an ELAN controller.
NOTES
3
contact techsupport@elanhomesystems.com
E L- I P- O T F 2- S S
NOTE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
4
www.elanhomesystems.com
QUICK START GUIDE
13 0 93
35
ø67
58. 1
39. 7
Unit: mm
RS485+
RS485 -
+5V OUT
N.C.
COM.
N.O.
GND
DIN2
GND
DIN1
1 2 3 4 5
6 7 8 9 10 11
12
13
Loading...