Elan CAB-330-MULTI User Manual

User Manual

CAB-330-MULTI

Beam | Spot | Wash

Foreword

Thanks for choosing CAB-330-MULTI products, it is the result of the latest,

independent, research and development of high-grade quality. Compared

with other same power 15R Lights, it's more lightweight

and convenient, and with perfect combination of international advanced

electronic Control technology and excellent human chemical.330W beam is in

full Compliance with the CE standard supports the internationalDMX512

signal control mode.

PRODUCT CATALOG

1:SAFETY TIPS--------------------------------------------------------------3

2:TECHNICAL PARAMETERS----------------------------------------------4

3:SCHEMATIC LIGHTING COMPONENTS-----------------------------5-6

4:PACKING AND SHIPPING-----------------------------------------------7

5:SAFETY STANDARDS-------------------------------------------------8-11

6:CHANGE BULB-------------------------------------------------------12-13

7:FUNCTION DECLARATION-----------------------------------------14-15

8:DISPLAY SETTING(MENU CONTROL)-----------------------------16-17

CAB-330-MULTI uses imported Yodn 330W 16R lamp for more

brightness than 15R, strong light effect, clear pattern, fast and smooth

pan&tilt running, precise positioning and uniform pure color high

standards of color disc.

CAB-330-MULTI has a super high and super long distance range, also has

14 gobos with open circle copper gobo wheel +9 three-dimensional gobos +

white(changeable), a frost lens,13 color with white color wheel, and with a

prism effects of 8 facet prism + T shaped prism.

CAB-330-MULTI are widely used in TV stations, large gymnasiums, discos,

dance halls, nightclubs, large-scale performances and other professional

occasions.

9:CHANNEL--------------------------------------------------------------19-21

10:FAILURE ANALYSIS & RESOLUTION----------------------------20-21

11:CLEAN LAMP-----------------------------------------------------------22

1:SAFETY TIPS

◇

Before using this product, please observe carefully the product is not unwrap or

damage during transportation.As a result of damage during transporting , please

do not use the lights, and contact with the dealer or manufacturer.

◇

Before running products, to ensure that the voltage and Hertz in accordance

with the requirements of lights.

◇

It’s very important, connecting ground wire to avoid the electric shock.

◇

This product is for dry indoor environment.

◇

This product must be installed on the sufficient space, adjacent to interface the

shortest distance of 100 cm,to ensure that the lights will not crash each other.

◇

Before moving or repairing the product , please unplug the power.

◇

When it working, ensure that no inflammable and explosive near objects.

◇

When installing this product, please use the safety rope. When handling this

product, lift the armrest base,rather than the lamp body.

◇

This product is suitable for a maximum temperature of 35 degrees Celsius, when

the surrounding environment is higher than 35 degrees Celsius, please do not use

this product.

◇

Do not touch. When working, the product running very fast, to prevent bruising

Please read the guide book, the guide book that contains the

installation, use and maintenance of important information.

hands.

◇

Problems happens when operating performances, should immediately stop

using the lights.Do not carry out maintenance, repair damage caused or likely to

cause other problems.Please contact the company's maintenance repair. During

the repair process, use the same type of accessories.

◇

Please read the instructions carefully, especially regarding the installation, using,

maintenance parts.Important that the lighting in the transport process, must be

packed anti-shock protection carton or flight case.

2.TECHNICAL PARAMETERS

◇

DMX Channel:30/19CHs

◇

Control model:DMX512,Auto model etc

◇

LED LCD touch screen + button control, Chinese/English mode, intelligent

display board flip function

◇

Yodn 330w lamp

◇

Super fast and ultra silence 3-phase step motors

◇

Color temperature is 8000K,life span is 2000Hs.

◇

13 Color with white,dual color effect.

◇

14 fixed gobo with white

◇

9 changeable rotating three-dimensional gobo with white.

◇

Any two kinds of prism stack can combine dynamic effect, positive and ne

gative rotation switching effect.

◇

Optical lens: High precision glued optical lens

◇

Focus：Linear focus

◇

Zoom:linear zoom

◇

Dimmer：0-100% linear dimmer.

◇

Beam angle：2.5-35 degree.

◇

Strobe：two-pieces plate strobe(0.5-9FPS)

◇

16pcs super silence motors,pan&tilt 3-phase step motors,16bit.

◇

Housing：high temperature resistant alloy plastic+Die casting handle

When Remote control the bulbs, lamps automatically reduce the 60W power

◇

IP rate：IP20

◇

Weight: 18.6KG

◇

Size: 361* 300.8* 601.8mm

Extended features:support disconnecting the power supply,the displ

ay panel set up address code (had to pre-equipped with batteries).

3：SCHEMATIC LIGHTING COMPONENTS 图

1: light head cover 2:top cover 3:arm cover 4:handle 5:Liquid crystal display

screen 6:menu 7:up 8:down 9:return

4:PACKING AND SHIPPING

4.1 Packing

Name

Quantity

Unit

User manual

1

piece

CAB-330-MULTI is packaged by carton or standard 2-in-1 flightcase

(selectable 1in1 or 4in1), Random accessories items shown below

Signal line

1

piece

Safety rope

1

piece

Clamp+bracket

2

piece

Power line

1

piece

4.2Transport protection locks

In order to transport it easy to protect the lamp body has two locks

(XY axes each a lock), X-axis has four lock position, Y-axis triple lock,

lock locked in the center position in the transport and light a vertical position with

the arm member.

4.3Packing

1.Disconnect the power supply so that the lamp to cool completely before

packaging equipment, at least 15 minutes or more.

2.Closing the light protect lock, when clean the surface of the light dust

3.Cover the light , seize the equipment both sides aluminum handles on to make it

upside down and gently placed in the box.

4.Add lighting accessories after placing the light in box.

5.Up to two crates stacked prohibited upside down.

4.4Unpacking

1.Open the box and bag

2.Seizing the equipment handles, lifting and carrying away the light from the

box .Or opening the flight case cover，placing lift boom close to the light base, then

equipping light hook on light base bottom.

tightening Quick Install locks. At last rising away boom to the top of the lamp from

flight case, put the flight case away.

3.Before turning on the light,should open the light protecting lock.

Note: Upon receipt of lamps, please check if there is damage to the fold closure

caused by transport,where there is transportation damage, please do not use this

fixture, and as soon as possible contact.

5:INSTALLATION

Users should ensure that light and installation materials are checked for regular

safety checks, Unprofessional incorrect installation can lead to dangerous, if the

lack of working conditions and professional standards, please operate the light by

professionals. Do not use the light if the working temperature isn't 0°-40° .When

the lighting installation, dismantling,moving, or servicing, do not stand directly

beneath the lamp. The operator must ensure that the fixtures are secure

connection, installing the light after professionals approving electrical parameters

，

make sure that these installation must be checked at least once per year by

experts.

5.1 Installating rigging

CAB-330-MULTI can be placed on the stage or on a stand in any direction. Quick

lock system can quickly and easily remove or install a light hook.

Note: must use two clamps fixed equipment, and are 1/4 buckle fastening jig, only

fully rotated 90 degrees clockwise to lock fastener.

5.2Fixed equipment

1. Before installing fixtures,must verified rigging equipments are not damaged,and

can bear at least 10 times of light's weight. Check the building can be beared at

least 10 times of total weights of light, fixture, and cable accessories.

2.Insert the locked hook fastener into base mounting holes horizontally, grab the

handle clockwise 90 degrees fasteners, in the same way to install a second

fastener,make sure the fastener is fastened under the light base.

3.If truss can be lifted

，

the equipment can be directly clamped from flight case

and locked fixture base. Then hung on the light and using safety rope fixed it.

Before rising the light to right height, connect the power cord and signal cable.

Note: add a safety rope attached the light's base insurance shelf, do not connect

the device handle.

Note: Lights be placed vertically upward,the shortest distance between

working lights must be more than or equal 1000mm, lighting installation

layout as following.

5.3 Data cable

Data cable is DMX512 signal

Note: Signal line connections is X-type connector

。

X-type connector-----If the external flexible cable or cord of this light is damaged,

please replace professional cable or cord from the manufacture or its agent.Lights'

DMX input and output connects to a three-pin XLR and five-pin XLR insert, first pin

is grounded,then negative signal is second pin, third pin connects to the positive

polarity signal, fourth and fifth are empty.In order to prevent reception reflection

and interference control signal,a terminal plug must be installed on the first branch

of the connected device last 3-pin output jack.

controller is connects to the nearest input XLR 3-pin, then from the output of the

device connects to the input of the next device,continuous connection one by one,

the final output data cable terminal equipment plug one end into the

terminal.

If the signal transmission is long-distance , 512 signal amplifier must be added.

DMX512 signal controller connect to the input of the amplifier first, then connect to

the fixture from its output,couple with the terminal plug last.

1 Do not use two separate output connection, if connect the branch separating

consecutive DMX512 signal amplifier must be used to separate. 2 Please use the

shielded twisted-pair cable,standard microphone cable can not be reliably

controlled long-distance data.

6：AC POWER

6.1Fuse

power

fuse

100-240v~

8A 6*30 main fuse

6.2 Power Connection

If the external flexible cable or cord of this light is damaged, the line is up to the

manufacturer or its service agent or a similar qualified person to replace, in order

to avoid danger. Connect the power supply personnel must have the appropriate

qualifications before proceeding, you must make sure you are using the power

supply voltage matches the voltage identified and have overload or leakage

protection.

1.Directly connect the device to the power supply, do not connect to the silicon box

dimming system, otherwise damage to the equipment.

7:Lamp

7.1 lamp description

Note: 1.when replacing a light lamp does not touch the bulb with bare hands at the

ball, avoiding oil stained hands on the ball.

2.When you install and dismantle the lamp into the lamp gently put on, can not let

the bulb hit hard objects around it to prevent damage the bulbs.

CAB-330-MULTI is used with Yodn Single-ended lamp is short arc point light

source, and its color temperature is 8000K and very stable, CRI

＞

90.Life span is

over2000 hours(according the using situation)

1.Attention

1. Do not install other similar lamps, and will cause safety hazards or equipment

damage.

2.To reduce the risk of damage to the lamp, replacing the lamp before the lamp life

over.

3. Do not use scratches and has damaged bulb

7.2Changing lamp

1. Disconnect the power, so that the lamp cooling, the arm of the lamp body lock

locked in a horizontal position.

2. split bulbs:Remove the 4PCS M3(ABCD)fixed screws

3.Please hand out buckles light bulb in the shell

Install bulbs are against the operation.

7.3Correction bulbs

(lamp has been corrected before selling, if the individual case happens when

changing the lamp, could following this way.)

1.The light is reseted by turning on the power,using the menu or console light bulb

to play a bunch of white beam.

1.Please use cross screwdriver to open the back cover of lamp(use flathead

screwdriver to adjust lamp fixed support,adjust A，when adjust A the light spot

could be left or right to adjust（Note: screwdriver do not collision bulb input, please

professional operation)

8:Function

8.1 gobo wheel

A metal gobo wheel is composed by 15 gobos,customers could change all

kinds of customized gobo wheel and a glass gobo wheel with 9 rotational gobo +

white,and customers could replace all kinds of customized gobo wheel(the gobo

wheel is professional high temperature resistance glass gobo wheel with inner

diameter 12mm + outer diameter of 16.5mm)

Spot gobo wheel

8.2color wheel

Color wheel is made by 13 high standard fixed color, the user can easily select

their own favorite color, to create a perfect lighting effect.Use the gobo wheel at

same time is better.It can be easily transformed a colorful gobo effect. (According

to customer needs may change at any time own custom various color wheel).

8.3 Optical lens focusing

The super mute voice motors and belt are used to work together to adjust

optical lens to complete the pattern definition and achieve zoom enlarge system

from 2.5 to 36 degree of gobo.

8.4 Prism wheel and the prism enlarge

The prism wheel is equipped with a 8-facet prism and a T-facet prism can

clockwise and counterclockwise rotation, speed adjustable, with colors and

patterns, it can create a variety of colorful lighting effects.

The prism plate through zoom combination to adjust prism spot size then react the

dynamic effect of prism, and two prisms stack can combine endless dreams special

effects.

8.5 Dimmer and strobe

0-100% mechanical dimmer, you can instantly switch freely adjustable strobe

speed up to 12 times / sec, along with random strobe special features.

8.6Frost

Frost is a piece of atomizing lens, according to the actual control to complete

the frost effect as your want .

8.7 Horizontal and vertical scanning

Pan:540°，Tilt 270°，With 16BIT precise positioning capabilities.

Horizontal and vertical speed is adjustable.

8:Display setting

8.1Display panel

1.:DMX Address

it can be done of address choice by touch screen,press 6 button to save the

selectable address code.

2:Information item

Fixture times

power on times

power on number

lamp on times

lamp on number

3:Set up

(1).DMX presets 1.mode1 16CH 2.model 24CH

(2).Display Intensity Display brightness 0-255 can optionally from dark to light

(3).Display saver Delay 0-600 Screensaver time settings

(4).pan Reverse off/on

(5).tilt Reverse off/on

(6).Blackout pan/tilt off/on

(7).control mode DMX/AUTO/SOUND 512

(8).Default settings

4: Internal control

(1) Reset Total system Reset

pan/tilt reset

color system reset

gobo system reset

strobe reset

optics reset

(2) manual control

5: Auto mode1/2/3

6: Calibrations Fine tune the initial data of motor of lamp internal(please be

careful)

Access Code choose code:003 press ENTER button to set

Pan tilt color wheel fixed gobo wheel rotation gobo wheel auto

rotating gobo wheel

prism 1 prism 1 rotation

prism 2 prism 2 rotation

zoom

frost

focus

dimmer

1 lamp status on/off

2 setting lamp on power off on

8.2 Menu setting:

9.Channel

1:pan

0-255:pan 540 degree

2:pan fine

0-255:pan fine

3:Tilt

0-255:tilt 270 degree

4:tilt fine

0-255：tilt fine

5:pan/tilt

speed

0-255:pan & tilt speed
adjustment

6:function

130-139 lamp on

140-149 pan & tilt reset

150-159 color wheel reset

160-169 gobo wheel reset

170-179 strobe reset

180-189 zoom/focus/prism
reset

200~209complete reset

230-239 lamp off

7:color
wheel

0 white

9 dark red

18 dark blue

27 yellow

37 green

46 carmine

55 sky blue

64 red

73 dark green

82 amber

91 blue

101 orange

110 CTO

119 uv purple

128-129 white

130-134 dark red

135-138 dark blue

139-143 yellow

144-147 green

148-152 carmine

153-157 skyblue

158-161 red

162-166 dark green

167-171 amber

172-176 blue

177-180 orange

181-185 CTO

186-189uv purple

190-220 clockwise rainbow
effect from fast to slow

221-224 static

225-255 anticlockwise
rainbow effect from slow to
fast

8:color
wheel

（

fine

0-255 color wheel fine

positionin
g)

9:

0-127

Prisms stack
anticlockwis
e rotating

128-255

Prisms stack
clockwise
rotating

10:static
gobo
wheel

0-3 white

4-9 gobo 1

10-15 gobo 2

16-21 gobo 3

22-27 gobo 4

28-33 gobo 5

34-39 gobo 6

40-45 gobo 7

46-51 gobo 8

52-57 gobo 9

58-63 gobo 10

64-69 white 1

70-75 white 2

76-81 white 3

82-87 white 4

88-95 gobo 1 shake

96-103 gobo 2 shake

104-111 gobo 3 shake

112-119 gobo 4 shake

120-127 gobo 5 shake

128-135 gobo 6 shake

136-143 gobo 7 shake

144-151 gobo 8 shake

152-159 gobo 9 shake

160-167 gobo 10 shake

168-175 white 1 shake

176-183 white 2 shake

184-191 white 3 shake

192-199 white 4 shake

200-201 white

202-227 clockwise from fast
to slow

228-229 static

230-255 anticlockwise from
slow to fast

11:rotatio
n gobo
wheel

0 white

1-4 the biggest fixed open
circle

5-7 spot gobo 1

8-10 spot gobo 2

11-13 spot gobo 3

14-16 spot gobo 4

17-19 spot gobo 5

20-22 spot gobo 6

23-25 spot gobo 7

26-28 spot gobo 8

29-31 spot gobo 9

32-34spot gobo 1 auto
rotating

35-37spot gobo 2 auto
rotating

38-40spot gobo 3 auto
rotating

41-43spot gobo 4 auto
rotating

44-46spot gobo 5 auto
rotating

47-49spot gobo 6 auto
rotating

50-52spot gobo 7 auto
rotating

53-55spot gobo 8 auto
rotating

56-59spot gobo 9 auto
rotating

60-67spot gobo 1

68-75spot gobo 2

76-83spot gobo 3

84-91spot gobo 4

92-99spot gobo 5

100-107spot gobo 6

108-115spot gobo 7

116-123spot gobo 8

124-129spot gobo 9

130-1371spot gobo 1 auto
rotating

138-145spot gobo 2 auto
rotating

146-153spot gobo 3 auto
rotating

154-161spot gobo 4 auto
rotating

162-169spot gobo 5 auto
rotating

170-177spot gobo 6 auto
rotating

178-185spot gobo 7 auto
rotating

186-193spot gobo 8 auto
rotating

194-199spot gobo 9 auto
rotating

200-201white

202-227gobo clockwise from
fast to slow

228-229static

230-255gobo anticlockwise
from slow to fast

12:spot
gobo auto
rotating

1-127gobo rotating from fast
to slow
128-255gobo rotating
anticlockwise from slow to
fast

13:rotatin
g gobo
position

0-255 auto rotating fine

14:prism

0-19white
20-49 prism 1 static
50-75 prism 1 rotation
76-105 prism 2 static
106-127 prism 2 rotation

15:prism
rotating

0 static prism
1-127 clockwise from fast to
slow
128-129 static prism
130-255 anticlockwise from
slow to fast

16:frost

0-255 linear frost

17:zoom

0-255

18;zoom

fine

0-255

19:focus

0-255

20:focus

fine

0-255

21:empty

Auto focus（extension)

22:strobe

0-31 strobe off

32-63 strobe on

64-95 strobe from slow to
fast

96-127 strobe on

128-143 strobe on from slow
to fast

144-159shutter from fast to
slow

160-191 strobe on

192-223 random strobe from
slow to fast

224-255 strobe on

23:dimme

r

0-255 0-100%

24:dimme

r fine

0-255 dimmer fine

25

C Cyan linear penetrate

26

C Cyan fine

27

M Magenta linear penetrate

28

M Magenta fine

29

Y Yellow linear penetrate

30

Y Yellow fine

8:Failure scoreboard and solutions

Listed below is a common approach in the operation of a few common problems.

◇Fault A: The lamp is not working, the bulb is not lit, the fan does not work

Solving 1: Check the power supply or the fuse is burned

Solve 2: The main power connector on the voltage detector

◇Fault B: connect control units, lighting does not respond

Solving 1: After connecting control units, lighting should be working. If it is not

working properly, check the signal cable plugs and wires are connected correctly.

Solve 2: If the lamp is lit display, but the channel does not respond, check the

address code is set correctly and DMX output voltage polarity.

Solve 3: DMX signal problems if your lighting is off,check the input terminal and the

circuit board.

Solve 4: Please change another one DMX controller

Solve 5: Check whether the signal cable near high voltage power lines caused DMX

display board inside the wire damage.

◇Fault C: some channel is not working

Solving 1: stepper motor may be damaged, or the line connecting the

motherboard burned out.

Solve 2: IC driver board on the motherboard may be damaged

9:CLEAN LIGHTS

Must regularly clean the outside of the optical lens focusing the dust。Based on the

number of lamps use a clean environment to determine:Are moist, smoked or the

surrounding environment is particularly dirty, which can cause dust deposition

lamps.Please use a glass cleaning solution and a soft cloth to wipe the focusing

optical lens. Carefully Qi dry each part. At least 20 days to clean the dust outside a

lens, the lens inside 30-60 days to clean up the dust once. Regular inspection lamp

fan and bottom case fan, a fan of at least 20\days to clean up dust deposition.

Above cleaning must be executed in case of power failure.