EL EL-BL100G Instruction Manual

Instruction Manual

2 in 1 Premium Blender with Dry Mill

Model: EL-BL100G

Before operating this product,

please read this instruction manual carefully.

01

READ ALL INSTRUCTIONS BEFORE USING THE IRON

Features

① Inner cover ② Lid ③ Glass jug
④ Sealing ring ⑤ Cutting blade ⑥ Cup base
⑦ Motor block ⑧ Rotary switch ⑨ Jug assembly
⑩ Ring

Technical infor mation

Voltage/frequency: 220V 50/60Hz 400W
Glass jug capacity: 1.5 liters KB=3MIN

WARNING for your safety

ALWAYS READ ALL IMPORTANT SAFEGUARDS AND
OPERATING INSTRUCTIONS BEFORE USING THIS
BLENDER

• Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.

• Do not use the appliance if the mains cord, the plug or other
parts are damaged.

• If the mains cord is damaged, it must be replaced by a service

authorized center or similarly qualified persons in order to avoid
a hazard.

• Avoid touching the blades, especially when the appliance is
plugged in. The blades are very sharp!

• Always unplug the appliance from the mains before assembling,
disassembling or making adjustments to any of the accessories
and during cleaning.

• Never use any accessories or parts from other manufacturers

or that have not been specifically advised. Your guarantee will
become invalid if such accessories or parts have been used.

• Never immerse the motor unit in water or any other liquid, nor

rinse it under the tap.

• Only use a moist cloth to clean the motor unit.

• Keep the appliance out of the reach of children.

• Never let the appliance run unattended.

• Do not exceed the maximum level indicated on the accessories.

• Do not exceed the maximum quantities and processing times

indicated in the table.

• If the blades get stuck, unplug the appliance before removing

the ingredients that are blocking the blades.

• Avoid touching the cutting edges of the blade units when
cleaning them. They are very sharp and you could easily cut
your fingers on them.

• Never use the accessories to switch the appliance on and off.

• Always make sure the lid is properly closed and the measuring

cup has been inserted properly before you switch the appliance
on.

• Make sure the blade unit is securely fastened to the blender jar
before you assemble the jar onto the motor unit.

• The appliance can only be switched on if the glass jug or the

mill has been correctly assembled onto the motor unit.