EKWB ek-fc terminal Service Manual
3rd revision, Jan 25th 2017
EK-FC Terminal
USER GUIDE
GENERAL INFORMATION: SERIAL VS PARALLEL
Serial or success ive flo w:
Water starts flowing initially through first
block, continues to second block and
ends up with the third block. Whole system flow is lower compared to parallel
flow due to higher restriction.
/ 2 /
Parall el flow:
Water flows through all blocks simultaneously. With such configuration each water
block gets one third of all flow. Total system flow is higher compared to serial or
successive flow.
CHOOSING INLET AND OUTLET PORT
It is of highest impor tance to use correct inlet and outlet port configuration. Not using
the correct ports may result in water bypassing the water blocks instead of flowing
through the water blocks.
As a result the bypassed graphics card will overheat and may get damaged
beyond repair!
No inlet
or outlet
possible
OPTIONAL
OPTIONAL
*
*
/ 3 /
No inlet
or outlet
possible
OPTIONAL
*
/ 4 /
No inlet
or outlet
possible
OPTIONAL
*
Loading...