EKWB EK-Classic Pump Reservoir 160 SPC PWM D-RGB, EK-Classic Pump Reservoir 260 SPC PWM D-RGB Service Manual
EK-Classic Pump Reservoir
160 / 260 SPC PWM D-RGB
PUMP-RESERVOIR COMBO
1st Revision, Jun 4th 2020
INSTALLATION AND MOUNTING MANUAL
This product is intended for installation only by expert users. Please
consult with a qualified technician for installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no
liability whatsoever, expressed or implied, for the use of these products,
nor their installation. The following instructions are subject to change
without notice. Please visit our web site at www.ekwb.com for updates.
Before installation of this product please read important notice, disclosure
and warranty conditions printed on the back of the box.
Before you start using this product please follow these basic guidelines:
Please carefully read the manual before beginning with the
installation process!
The EK fittings require only a small amount of force to screw them
firmly in place since the liquid seal is ensured by the rubber o-ring
gaskets.
The use of corrosion inhibiting coolants is always recommended
for any liquid cooling system. EKWB recommends any of the EKCryofuel for worry-free usage.
TABLE OF CONTENT
INSTALLING THE ASSEMBLY USING ENCLOSED BRACKET (Bracket - XRES Classic Spider - OPTION 1) 4
INSTALLING THE ASSEMBLY - OPTION 2 5
ATTACHING THE FITTINGS 6
CONNECTING THE D-RGB LED STRIP 7
SUPPORT AND SERVICE 8
SOCIAL MEDIA 8
- 3 -
Loading...