Quick Start Guide
Introduction
EKS Otus is a professional 2-in-1 DJ controller with integrated multichannel audio
interface. Otus offers a wide range of controls enabling the user full control no mouse or
keyboard needed. Assignable buttons, knobs, push-and-rotate selectors and capacitive
touchpad enable advanced creative freedom. The Future Proof Ideology of the control
layout allows the use of future software features. A professional level audio/headphone
output allows direct connectivity to a DJ system or the possibility for headphone preview.
Driver Installation
1) Download the latest drivers from www.eks.fi
2) Close all applications
3) Install Otus MIDI & Asio drivers
Registering & software updates
Register your EKS products to receive product support and software updates at www.eks.fi. EKS
periodically provides updates to software. Please check www.eks.fi/support for latest software
updates.
The Hardware Setup
On the back panel you will find the following connectors:
1) USB connector
2) Headphone jack
3) S/PDIF outputs for both virtual decks
4) Analog RCA outputs for both virtual decks
USB connection
Connect the USB to your PC/Mac and the audio outputs to your mixer. Note! Otus controllers
calibrate their touch sensitive platter every time you connect the USB cable to your computer. If you
have your hand on the wheel while connecting the device, the calibration will be incorrect. It's best
to first connect the USB cable to the controller and then to your computer, keeping your body parts
away from the wheel. After connecting the controller to your computer for the first time, the
operating system takes a few moments to identify the device and load the USB drivers (which
come with the operating system). This is normal. Just click Next and OK for any dialogs appearing.
If you have more than one controller, let your computer identify one player at a time and finish the
process before connecting the second one.
12 3 4 34
Control Layout
The controls are freely assignable using the EKS MIDI Mapper and software's MIDI learn
functions. The functions suggested below are basic ways to conveniently utilize the Otus layout.
7,5" Jog Wheel
A high resolution 7.5 jog wheel with both physical and virtual sensitivity adjustments. The touch
sensitive top part of the wheel allows you to scratch or cue the track by rotating the wheel. The
outer rim of the wheel functions as a pitch bender.
Four Selector Jog Wheels
Assignable jog wheel controllers with an integrated select button in the middle. The two jog
wheels on the front also pair with extra buttons for moving in the menu.
10 control knobs
The 10 knobs are optimized to flexibly control EQ:s and headphone levels or effects in your
software..
7 loop control buttons
The loop controls can be used to start, stop and adjust loops on the fly.
Touchpad
A touchpad has been integrated for mouse or user definable X/Y effect control.
Touch Sensitive Pitch Ribbon
The 80mm touch sensitive relative pitch slider enables highly accurate pitch adjustments. The
amount of pitch is altered by sliding a finger on the slider, and the accuracy can be chosen on
the fly by pressing the scale button. The LED indicates the pitch value, which is recalled as the
user swaps the virtual deck.
6 touch buttons
The six touch buttons can be assigned to launch cue points or samples or to select user defined
functions.
6 player control buttons
Basic controls for cueing, playing and browsing the track.
Dual Layer Control Switch
Otus features two layers of controls, which can be swapped by clicking the switch button. This
enables operating two virtual decks with just one controller. Layer changes are indicated by the
change of the LED colour.
Bison DJ Software
The bundled Bison software has a native support for Otus resulting in perfect control and minimal
latency. While using Bison, the sound will be routed only via the integrated soundcard of Otus.
Setting up Bison is easy:
1) Download the latest version of Bison from www.eks.fi
2) Install by following the on-screen instructions
3) Launch Bison
3rd Party Software
The EKS ASIO and MIDI drivers enable you to use Otus with any MIDI compliant software.
To learn how to use the EKS Midi Mapper, visit the support section at www.eks.fi for instructions to
configure your EKS controllers to work with your favorite DJ software.
Specifications
COMPATIBILITY Windows / OS X / Linux
ASIO, Core Audio, MIDI, USB 2.0 / USB 1.1
POWER REQUIREMENTS USB-powered, 450 mA
DIMENSIONS (W X D X H) 365 mm x 335 mm x 70 mm
WEIGHT 2 kg
CONNECTORS USB 2.0
4 x RCA Analog Output (Two Stereo Outputs)
2 x SPDIF Output
6,3 mm Headphone Output
AUDIO INTERFACE Integrated 24-Bit 6 Channel Audio Interface
16 / 24 bit, 44.1 / 48 kHz
Frequency Response 4Hz - 24kHz
SNR > 115 dB JEITA (a-weighted)
THD +N 0.002%
2 x Burr-Brown I2S DAC
2,5V RMS (7Vpp)
INCLUDED IN PACKAGE USB Cable
Double RCA Audio Cable
User Manual
Audio connection
Otus can be configured in various ways: to work as a two channel audio interface, an all-in-one
control device or a simple MIDI controller without audio. Here you can see a few basic ways to
connect Otus to your DJ setup.
In the first setup the Otus is connected to a standard external DJ mixer of your choice. This allows
a quick and easy setup in a club or in other hectic situations.
In this second setup the Otus is used as a all-in-one DJ control device, which can be connected
directly to your amplifier or PA system. The Otus features a headphone jack, enabling a direct
preview of your music.
In the third basic setup the Otus is used only as a MIDI controller and the audio is routed through
the audio interface of your computer or an external soundcard. This way you can utilize the Otus to
control as many virtual decks as your DJ software of choice allows.
Master Output
USB
2xRCA
LEVEL B
LOW
-32
+12
HIGH
-32
+12
LOW CUT
GAIN
MAX
LOW
-32
+12
HIGH
-32
+12
LOW CUT
GAIN
MAX
LEVEL A
MIC LEVEL
MAX
MASTER
MAX
PHONES MIX
A
B
PHONES
MAX
MIC ON
TALKOVER
PHONO LINEPHONO LINE
USB
2xRCA
Master Output
USB
2xRCA
Master Output
EKS
Kimmeltie 1
02110 Espoo
Finland
Phone: +358-9-2609115
Fax: +358-9-2609095
E-mail: info@eks.fi, support@eks.fi
www.eks.fi
Please visit our website at www.eks.fi for latest information, user manuals and software
upgrades. For support please contact your local reseller first. For any additional questions,
contact us at support@eks.fi. Please remember to include the serial number(s) of your
unit(s) in your message.
Loading...