All contents of this Manual, including texts and images related to the door locks
products and the micro-computer programs, are copyright of our company, and
any imitation and copy is an act of tort.
Upgrade Description
As the continuous improvement and dev elopment of techno logy, our company will
continuously upgrade the product functions to meet the market demand. Any
difference between the purchased product and the Manual is subject to change
without notice. In case of doubt, please contact directly with our company for the
latest product information.
This fingerprint lock features of three kinds of functions, i.e. fingerprint + password + key, and can
store 100 fingerprints (00--99). The surface structure is shown in the following figures:
4
BioKing K1 User Manual www.ekoo.co.uk
1.1 Delete all fingerprints before start
Before the normal use, the bank of fingerprints should be emptied, the operation is as following:
Operational Procedure Indication of the lock
Remove battery pack cover, After a long beep, “00” will appear on display
long press administrative keys button
Release the button, the bank of It means a failure, if the buzzer gives off
fingerprint is initialized successfully 2 short beeps and “--” appears on the display
Note: After being emptied, all the fingerprints in the lock will be deleted, and all the
access fingerprints will have to be registered again, so this operation needs
very cautious consideration.
5
BioKing K1 User Manual www.ekoo.co.uk
1.2 Setting the administrative password
Administrative password (made up of 00 and a 6-digit password) is not used to unlock the door but to
set and delete other user passwords and user fingerprints.
Note: Factory default administrative password is 00123456
Operational Procedure Indication of the lock
Rem
ove the battery pack cover and press “0” will appear on the display
the administrativ
e keys
The buzzer will give off a long beep and the
Input 8-digit password starting with 00 admin password will be set successfully
00456321) and press “#” to confirm
(e.g.
It means failure if the buzzer gives off
2 short beeps and “--” appears on the display
Note:
this operation can cover the admin password set before, and the former one will be
unavailable.
6
BioKing K1 User Manual www.ekoo.co.uk
1.3 Set up access password
The 8-digit access password is made up of 2 parts; Group Number + six random numbers. The first
2 numbers are the “Group number” (from 01~09), and the other six numbers are “random numbers”
(from 1~9).
Note: The lock can only set up 9 groups.
Add access password
Operational Procedure Indication of the lock
Input the admin password The buzzer will give off a long beep
Input
an 8-digit access password Buzzer will give off a long beep,
(e.g. 01337766, 01887365, 02997755), present the password is added successfully
press “#” to confirm
I
short beeps and “--” appears on the display
t means failure if the buzzer gives off 2
7
BioKing K1 User Manual www.ekoo.co.uk
Delete access password by Group
Note: The access password can only be deleting by group.
O
Input the admin password The buzzer will give off a long beep
Input
(e.g. if 01337766, 01887365 needs to be and the password is deleted successfully.
deleted, input 01), press # to confirm.
perational Procedure Indication of the lock
only Group Number from 01 to 09, The buzzer will give off a long beep
It means failure if the buzzer gives off 2
short beeps and “--” appears on the display
8
BioKing K1 User Manual www.ekoo.co.uk
1.4 Set up access fingerprints
There are two ways to add fingerprint on the lock.
Method one: adding the fingerprint through administrative password
Note: all the number of fingerprint can’t be repeated. Number “00” is the master fingerprint number.
O
Input
Press “#” to confirm. “0” will flicker on the display.
Input a 2-digit number (from 00 to 99)The light of fingerprint screen will be on
Press “#” to confirm.
Press
for the first collection
The
Remove the finger and press the same green indicator light will give a flicker to
place again for second collection. show that the setting is successfully.
perational Procedure Indication of the lock
the 8-digit admin password The buzzer will give off a long beep
the finger onto the screen and hold The buzzer will give off a long beep
buzzer will give off a long beep;
9
BioKing K1 User Manual www.ekoo.co.uk
Method two: Adding other fingerprint by Master Fingerprint number “00”
Note: Master fingerprint no. “00” has the authority to add and delete other fingerprint. Master
fingerprint No. “00” can only be added and deleted by administrative password.
O
use method one.
Put
Input a 2-digit number (from 01 to 99)The light of fingerprint screen will be on
Press “#” to confirm.
Press
for the first collection
The
Remove the finger and press the same green indicator light will give a flicker to
place again for second collection. show that the setting is successfully.
perational Procedure Indication of the lock
Set up master
master fingerprint on screen “FP” will present on the display;
and press “#” to confirm than “0” will flicker on the display
the finger onto the screen and hold The buzzer will give off a long beep
fingerprint No. “00”
buzzer will give off a long beep;
10
BioKing K1 User Manual www.ekoo.co.uk
There are two ways to delete fingerprint on the lock.
Method one:Deleting the fingerprint by admin password
Operational Procedure Indication of the lock
Input
Than press “*” “0” will flicker on the display
Input th
press “#” to confirm show that the delete is successfully
the 8-digit admin password The buzzer will give off a long beep
e 2-digit number of the fingerprint The buzzer will give off a long beep
It means failure if the buzzer gives off 2
short beeps and “--” appears on the display
11
BioKing K1 User Manual www.ekoo.co.uk
Method two: deleting the other fingerprint by master fingerprint No. “00”
Operat
ional Procedure Indication of the lock
Put master fingerprint No. 00 on screen “FP” will present on the display
Than Press “*” “0” will flicker on the display
Input the 2-digit number of fingerprint The buzzer will give off a long beep to
need to delete and press “#” to confirm present fingerprint is deleted successfully.
I
short beeps and “--” appears on the display
t means failure if the buzzer gives off 2
12
BioKing K1 User Manual www.ekoo.co.uk
1.5 Normal use by users to unlock the door
There are three methods to unlock the door: fingerprint, password and mechanical Key.
Method 1: unlock the door with fingerprint
Operational Procedure Indication of the lock
upward the sliding cover in front Light of fingerprint screen will be on
Push
T
Press a registered finger on screen Green indicator light will be on
The registered number will show on display
T
Press the handle to open the door short beeps and “--” appears on the display
he motor will start. It means failure if the buzzer gives off 2
he buzzer will give off a long beep
Note: when the sliding cover is opened, the fingerprint screen can be activated by pressing “#” on
the keypad. If the registered finger is injured or desquamated, it may be unable to be verified, and
the door can’t be unlocked. So it is suggested to register more than one fingerprint with both hands.
13
BioKing K1 User Manual www.ekoo.co.uk
Method 2: unlock the door with a password
Operational Procedure Indication of the lock
upward the sliding cover in front Light of fingerprint screen will be on
Push
Input the 8-digit access password The buzzer will give off a long beep
The motor will start. It means failure if the buzzer gives off 2
Press the handle to open the door short beeps and “--” appears on the display
Note: the lock is equipped with function of pseudo code; several numbers can be input in front of
the password, and the door can only be opened by inputting the correct 8-digit password. If more
then 32 digits are input without the correct password, the keypad will be locked for 15 minutes.
Method 3: unlock the door with the mechanical key
1. Open the sliding cover on exterior handle and insert the mechanical key into the key hole.
2. Rotate the key and press the handle downward to open the door.
14
BioKing K1 User Manual www.ekoo.co.uk
1.6 Passage Mode Function
The lock can be set on passage mode, where the door can be opened only by pressing the handle
downward directly.
How to set the function of constant opening:
When the knob of interior lock set at the back of lock is rotated to the mark “ON”, the green part
of the push button will appear and the lock is in the state of constant open.
How to quit the function of constant opening:
When the knob of interior lock set at the back of lock is rotated to the mark “OFF”, the red part
of the push button will appear and the lock is out of the state of constant open.
Note: the function of constant open can only be carried out when the password control and
fingerprint control are all working normally.
1.7 Function of back locking
The lock is equipped with function of back locking inside and outside the door
Lift the handle upward inside and outside the door and the function of back locking can be
started.
15
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.