EKO Instruments MS-01, MS-02 Instruction Manual

INSTRUCTION MANUAL

MS-01
MS-02

Solar Meter

EKO INSTRUMENTS CO., LTD. Solar Meter MS-01/MS-02 Instruction Manual V1

Pg. 1

1. Index

1. Index 1

2. Important User Information 2

2-1. Contact Information 2

2-2. Warranty and Liability 2

2-3. About Instruction Manual 3

2-4. Environment 3

3. Safety Information 4

3-1. WARNING/CAUTION 4

4. Introduction 5

4-1. Main Functions 5

4-2. Package Contents 5

5. Operation 6

5-1. Parts Name 6

5-2. Setup 6

5-3. Measuring 7

5-4. Downloading to PC (MS-02 Only) 9

5-5. Data Logging (MS-02 only) 9

6. Maintenance 11

6-1. Maintenance 11

6-2. Calibration/Recalibration 11

7. Specification 12

7-1. Main Unit 12

7-2. Software 13

7-3. Dimensions 13

EKO INSTRUMENTS CO., LTD. Solar Meter MS-01/MS-02 Instruction Manual V1

Pg. 2

2. Important User Information

Thank you for using EKO Products

Make sure to read this instruction manual thoroughly and to understand the contents before starting to operate the

instrument. Keep this manual at safe and handy place for whenever it is needed.

For any questions, please contact us at one of the EKO offices given below:

2-1. Contact Information

EKO INSTRUMENTS CO., LTD.

Asia, Oceania Region

www.eko-asia.com

[e-mail]

EKO INSTRUMENTS Co., Ltd.

1-21-8 Hatagaya, Shibuya-ku

To ky o, 1 51 -0 07 2 J ap an

Te l: + 81 ( 3 ) 34 6 9- 67 13

Fax: [phone]

Europe, Middle East, Africa, South America Region

www.eko-eu.com

[e-mail]

EKO INSTRUMENTS Europe B.V.

Lulofsstraat 55, Unit 32,

2521 AL, Den Haag, The Netherlands

Te l: + 31 ( 0 )7 0 3 05 01 17

Fax: [phone]

North America Region

www.eko-usa.com

[e-mail]

EKO INSTRUMENTS USA Inc.

95 South Market Street, Suite 300

San Jose, CA 95113 USA

Te l: + 1 40 8 -9 77 - 77 51

Fax: [phone]

2-2. Warranty and Liability

For warranty terms and conditions, contact EKO or your distributor for further details.

EKO guarantees that the product delivered to customer has been verified, checked and tested to ensure that

the product meets the appropriate specifications. The product warranty is valid only if the product has been

installed and used according to the directives provided in this instruction manual.

In case of any manufacturing defect, the product will be repaired or replaced under warranty. However, the

warranty does not apply if:

 Any modification or repair was done by any person or organization other than EKO service

personnel.

 The damage or defect is caused by not respecting the instructions of use as given on the product

brochure or the instruction manual.

EKO INSTRUMENTS CO., LTD. Solar Meter MS-01/MS-02 Instruction Manual V1

Pg. 3

2-3. About Instruction Manual

Copy Rights Reserved by EKO INSTRUMENTS CO., LTD. Making copies of whole or parts of this

document without permission from EKO is prohibited.

This manual was issued: 2018/05/31

Versi on Num ber : V 1

2-4. Environment

1. WEEE Directive 2002/96/EC
(Waste Electrical and Electronic Equipment)

This product is not subjected to WEEE Directive 2002/96/EC however it should not be mixed with general

household waste. For proper treatment, recovery and recycling, please take this product(s) to designated

collection points.

Disposing of this product correctly will help save valuable resources and prevent any potential negative

effects on human health and the environment, which could otherwise arise from inappropriate waste

handling.

2. RoHS Directive 2002/95/EC

EKO Instruments has completed a comprehensive evaluation of its product range to ensure compliance with

RoHS Directive 2002/95/EC regarding maximum concentration values for substances. As a result all products

are manufactured using raw materials that do not contain any of the restricted substances referred to in the

RoHS Directive 2002/95/EC at concentration levels in excess of those permitted under the RoHS Directive

2002/95/EC, or up to levels allowed in excess of these concentrations by the Annex to the RoHS Directive

2002/95/EC.

EKO INSTRUMENTS CO., LTD. Solar Meter MS-01/MS-02 Instruction Manual V1

Pg. 4

3. Safety Information

EKO Products are designed and manufactured with consideration for safety; however, please make

sure to read and understand this instruction manual thoroughly to be able to operate the instrument

safely in the correct manner.

WARNING
CAUTION

Attention to user; pay attention to the instructions given on the

instruction manual with this sign.

3-1. WARNING/CAUTION

 This equipment should only be used by suitably trained personnel.

 This equipment is intended for use in a dry environment only.

 Check this equipment and all associated cables and leads before operating the equipment.

 Do not use if there are signs of damage.

 Only use the connecting leads and temperature probes supplied with this equipment.

 Use 2x 1.5V AA Cells – there maybe Alkaline or rechargeable NiCd of NiMH.