EKLIPES Black Viper Motorcycle Cellphone GPS Adapter User Manual

 Follow the instructions in your Owner’s Manual to remove the seat and/or any other

components (side covers, etc.) necessary to provide access to the battery.

WARNING!

To prevent accidental vehicle start-up, which could cause death or serious injury,
disconnect battery cables before proceeding.

WARNING!

Disconnect negative (-) battery cable first. If positive (+) cable should contact ground
with negative (-) cable connected, the resulting sparks can cause a battery explosion,
which could result in death or serious injury.

 Install the positive (Red) ring terminal on the harness to the positive (+) battery post.
 Attach the negative (Black) lead on the harness to the negative (-) battery post.

 Connect the SAE Dual-Pin connector from the Cell Phone Adapter to the SAE Dual-

Pin connector on the Battery Harness.

 Now you are ready to connect your Cell Phone or any other 12 Volt accessory!