EKHO WMP-88 User Manual

EKHO WMP-88 Heart Rate Watch
USER MANUAL
1
Our S-Pulse™ technology measures the electronic signals that pass through your body as a result of the beating of your heart. This measurement is obtained by the watch’s two sensors: the top heart rate sensor and back battery door. The battery door is actually the primary sensor plate that measures these electronic signals off your arm.
The ECG (electrocardiogram) measurement is done when
you place your ngers from the opposite hand onto the top
sensor of the watch. This creates a loop across your body the watch can now read.
Introduction to Your EKHO WMP-88 Heart Rate Watch
To Turn Your Watch On:
1. Remove the LCD display sticker on the watch face.
2. Hold any button for 3 seconds until the screen turns on.
Table of Contents
Watch Display and Button Overview..................................
Display Icons and Descriptions..........................................
Operation Overview...........................................................
HEART RATE
Measuring Your Heart Rate................................................
Heart Rate Lock.................................................................
Relative Heart Rate.........................................................
Target Heart Rate Zone................................................
Target Heart Rate Zone - Standard Setup........................
Target Heart Rate Zone - Manual Setup.......................
Heart Rate Zone Alert.......................................................
2
4
5
6
7
8
8-9
9-10
10
10-11
11
3
Table of Contents
WATCH
User Information Setup.....................................................
Calorie..............................................................................
Time and Date Setup........................................................
Alarm and Hourly Chime Alert......................................
Chronograph....................................................................
Countdown Timer - Setup...........................................
Countdown Timer - Operation..........................................
Dual Time.....................................................................
MISCELLANEOUS
Care and Maintenance......................................................
Troubleshooting - Heart Rate......................................
Specications.............................................................
Battery.............................................................................
Power Off Mode..............................................................
Patents............................................................................
Limited Five (5) Year Warranty........................................
Limitations...................................................................
Disclaimer.........................................................................
Contact Information..........................................................
12 13 14
14-15
15
15-16
16
16-17
17 18-19 20-21
21
22
22
23 23-24
24
25
Watch Display and Button Overview
4
The watch buttons are not intended for use in or under water as this may force water past the seals.
* Image may vary from actual watch
Icon Description
Display Icons and Descriptions
5
HEART RATE
RELATIVE HEART RATE
HEART RATE LOCK
PM
ALARM
HOURLY CHIME
CHRONO / TIMER
Indicates heart rate values; ashes during acquisitions
Indicates percentage of maximum heart rate
Indicates heart rate function is disabled
Indicates PM time
Indicates alarm function is ON
Indicates hourly chime function is ON
Indicates Chronograph and Timer modes; ashes
when mode is ON
Operation Overview
6
Measuring Your Heart Rate
To get your heart rate reading, follow these three simple steps:
1. Strap the watch snugly around your wrist.
2. Place your ngers on the watch’s
Heart Rate Sensor and touch gently for 3-8 seconds.
3. Once detected, a beep tone sounds and your heart rate will be displayed in beats per minute (bpm). It’s that easy!
Your % of maximum heart rate will display along with your heart rate reading if Target Heart Rate Zone is turned ON (refer to Target Heart Rate Zone; p.9). Your reading will remain displayed for 6 seconds after you release the Heart Rate Sensor.
This watch is a sensitive monitoring device that reads your ECG signals and reading times may vary. If you do not get a reading, wait a couple of minutes and try again, or refer to page 18 (Troubleshooting - Heart Rate).
7
Loading...
+ 19 hidden pages