SC2-PRESTO • CompactPCI® Serial CPU Board • 4th Generation Intel® Core™ Processor
Feature Summary
General
<PICMG® CompactPCI® Serial (CPCI-S.0) CPU card
2
<Form factor single size Eurocard (board dimensions 100x1600mm
<Mounting height 3U
<Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
<Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
<Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit Ethernet
<Local mezzanine expansion option (side card), COTS and custom specific boards
)
Processor
<4th Generation Intel® Core™ CPU Haswell (-Refresh) Mobile
<i7-4700EQ Processor 2.4/1.7GHz • 47W/37W TDP • Quad-Core • PCIe Gen 3
<i5-4400E Processor 2.7GHz • 37W TDP • Dual-Core • PCIe Gen 3
<UEFI Phoenix® BIOS with ACPI
<Windows® and Linux supported (others on request)
Main Memory
<Integrated memory controller up to 16GB DDR3(L) 1600 +ECC
<DDR3(L) +ECC soldered memory up to 8GB
<DDR3(L) +ECC SO-DIMM memory module socket up to 8GB
SC2-PRESTO • CompactPCI® Serial CPU Board • 4th Generation Intel® Core™ Processor
Feature Summary
Graphics
<Integrated HD Graphics Engine, 3 symmetric independent displays
<Enhanced Media Processing, DX11.1, OpenCL 1.2, OpenGL 3.2, JPEG, MJPEG, MVC, SVC, MPEG-2
<Front panel: Dual Mini-DisplayPort (mDP) or single VGA connector option
rd
<3
<DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
<Max Resolution 3200 x 2000 @60Hz (any DisplayPort), 1920 x 1200 (VGA)
<4k x 2k @24Hz supported for Blu-ray playback
<Integrated audio
DisplayPort connector via mezzanine side card
Chipset
<Intel® QM87 Lynx Point Platform Controller Hub (PCH)
<8 x PCIe Gen2 5GT/s
<6 x SATA 6G
<10 x USB2, 4 x USB3
<LPC, Audio, Legacy
On-Board Building Blocks
<Additional on-board controllers, PCIe® based
<3 x Gigabit Ethernet controllers Intel® I210IT
< one of them supporting IEEE 1588-2008 Precision Time Protocol including PPS and PPM signals
<1 x Gigabit Ethernet PHY Intel® I217LM
<PCIe Gen2 packet switch 16-lane 16-port PLX 8618
<SATA 6G RAID controller Marvell® 88SE9230, ARM powered subsystem for host CPU offload
Security
<Trusted Platform Module (Option)
<TPM 2.0 for highest level of certified platform protection
<Infineon Optiga™ SLB 9665 cryptographic processor
<Conforming to TCG 2.0 specification
<Meets Microsoft Windows 8 boot time and performance criteria
SC2-PRESTO • CompactPCI® Serial CPU Board • 4th Generation Intel® Core™ Processor
Feature Summary
Front Panel I/O (4HP)
<2 x Gigabit Ethernet RJ45 (1 = PCH & I217LM - iAMT, 2 = I210IT)
<2 x DisplayPort (from processor integrated HD graphics engine, mDP style receptacles, optional cable
connector retainer available)
<2 x USB 3.0
CompactPCI® Serial Backplane Resources
<PICMG® CPCI-S.0 CPU card & system slot controller
<16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Core™ CPU
<6 x PCIe Gen2 5GT/s (6 links x 1 for peripheral slots)
<3 x SATA 6G (from PCH)
<4 x SATA 6G (Marvell hardware RAID controller)
<4 x USB2, 2 x USB3 (from PCH)
<2 x Gigabit Ethernet (I210IT networking controllers)
Local Expansion
<Mezzanine side card connectors for optional local expansion
<P-EXP - 2 x USB 2.0 & Legacy (from PCH)
rd
<P-DP3 - 3
<P-HSE - 3 x SATA 6G & 4 x USB 2.0 (from PCH)
<P-PCIE - PCIe Gen2 5GT/s 1 link x 4 lanes (from on-board PCIe® switch)
<4HP Low profile mezzanine module options
<CFast™ Card with C41-CFAST mezzanine module
<SATA 1.8-Inch Solid State Drive with C42-SATA mezzanine module
<Dual mSATA SSD with C47-MSATA mezzanine module
<Dual M.2/NGFF SATA SSD 2230 - 2280 size with C48-M2 mezzanine module
<Custom specific module design
<8HP/12HP Mezzanine side card options
<SCS-TRUMPET - 3
M.2/NGFF SATA SSD module sockets 2230 - 2280
<Variety of other side cards available
<Custom specific side card design
DisplayPort video (from Intel® Core™ CPU)
rd
DisplayPort F/P connector, RS-232, 2 x USB3, on-board 2.5-Inch SATA SSD or 2 x
SC2-PRESTO • CompactPCI® Serial CPU Board • 4th Generation Intel® Core™ Processor
CompactPCI® Serial
While mechanically compliant to CompactPCI®
Classic, CompactPCI® Serial (PICMG® CPCIS.0)
defines a completely new card slot, based on
PCI Express®, SATA, Gigabit Ethernet and USB
serial data lines. Up to 6 high-speed backplane
connectors P1 - P6 are provided on a system
slot controller such as the SC2-PRESTO, which
can be considered as a root hub with respect to
most signal lines. A passive backplane is used
for distribution of a defined subset of I/O
channels from the system slot to each of up to
eight peripheral slots in a CompactPCI® Serial
system.
Most CompactPCI® Serial peripheral slot cards
require only the backplane connector P1, which
comprises PCIe, SATA and USB signals, resulting
in a concise and inexpensive peripheral board
design. More powerful peripheral cards profit
from two so called Fat Pipe slots (PCIe x 8).
The SC2-PRESTO is a native CompactPCI® Serial
CPU card, suitable for usage in a pure CPCI
Serial environment. Due to its generous
backplane capabilities (22 x PCI Express® lanes,
6 x USB, 7 x SATA/RAID, 2 x GbE), very powerful
industrial systems can be built.