Ekena Millwork FRUL5114 Owner Manual

installation instructions:

PVC GABLE PEDIMENTS

SAFETY INSTRUCTIONS

Make sure to use the correct tools recommended. Wear safety goggles. Follow xture, power tools, and paint manufacturers’ instructions and users manuals. Use common sense and follow good construction practices. Gable brackets are not load‐ bearing, decorative use only.

TOOL & MATERIAL CHECKLIST

electric drill drill bit for pilot hole countersink bit lag screws & washers caulk sandpaper

Solid Decorative Pediments

1. MARK INSTALLATION AREA- Select the location for your Decorative Millwork. Hold the millwork in place and mark the location with a pencil.

2. APPLY ADHESIVE- Apply a 1/4” bead of PL Premium Adhesive to only the portion of the millwork surface that will touch the mounting surface.

3. FASTEN MILLWORK INTO PLACE- Press the millwork in place using the pencil marks as guides. Fasten securely with nails or screws. Countersink fasteners

and ll holes with caulk or wood ller.

4. FILL GAPS- If desired, caulk around millwork, lling any gaps between millwork and mounting surfaces.

5. FINISH AS DESIRED- Sand any lled holes and touch

up with paint or other nishes, as desired.

construction adhesive caulking gun mechanical fasteners

IMPORTANT INFO

• It is highly recommended that you paint/nish our pediments before installation.

• Once installed, you can apply any necessary touch‐up paint/nish.

• Clean installation surface and pediment of all dirt and dust with a clean cloth or dry sponge.

• Measure and mark the location where the pediment is going to be installed.

• All PVC pediments are for decorative use only.

adhesive

Gable pediment decorations are screwed to the soft, the bottom

board of the eave. The fascia (eave face board) usually overhangs

the soft by a small amount. Gable Decorations are normally installed below and immediately behind the fascia. That is, they are mounted out from the wall, suspended just behind the front

edge of the eave.

We Can Help. Call (866) 607-0453

www.ekenamillwork.comIndustry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork

ARCHITECTURAL PVC FAQS

What is PVC?

Each piece of Cellular PVC is made of stable high-density PVC that won't rot, split or chip, and doesn’t absorb water. PVC has a closed cell nature, so water cannot penetrate the product and it resists all forms of insect infestations, mold and mildew.

What types of special skills are needed to install PVC products?

None. If you can install wood products, you can easily install PVC products. They can be nailed, cut and sanded just like wood products.

Are special tools or supplies needed to install PVC products?

Hot-dipped galvanized or stainless-steel nails/screws are recommended for PVC products. For cutting, we recommend using carbide-tipped blades with as few teeth as possible and have plenty of support on both sides of your cutting station when trimming or cutting a product.

What are some general tips about installing PVC products?

Never install products with fasteners only. For best results, use along with PVC compatible adhesive on the back and at all joints. If nailing product at 40°F or below, predrilling is recommended. For concrete/masonry/brick installation apply masonry adhesive sealant (following manufacturer’s instructions) to the installation surface first, then laying trim and securing with masonry fasteners.

Can I clean PVC products?

For normal cleanup regular household cleaners such as Soft Scrub or Spic & Span can be used. Be careful in handling and keep the material covered to protect it from dirt and debris.

Are PVC products affected by moisture?

No. PVC does not absorb water as it is a closed-cell material. This closed-cell structure will prevent water absorption, making it perfect to install in bathrooms, kitchens, laundry rooms or outdoors.

Why or how do people use PVC millwork?

PVC is lightweight and easy to install, making it a top selection of both building professionals and consumers for exterior or interior applications. PVC offers maximum durability and minimal upkeep with a sharp design clarity and high-resolution quality, with endless custom pattern options. It offers the appearance and workability of wood, yet it is resistant to insects, weathering, moisture, and mildew. It will not split, rot, or deteriorate.

Where do I use PVC?

Interior or exterior applications up to 180° temperature. It is suitable for ground and masonry contact.

Does PVC expand and contract?

Yes, but allowing it to acclimate to temperature before installing and using our installation method mitigates movement. In temperatures above 80°F, the board joints should be tight. In temperatures of 40°F to 60°F, leave 1/8 inch of space. For less than 40°F provide for 3/16 inch between boards.

What type of caulk can I use with PVC?

You can use an acrylic, urethane, or polyurethane caulk with PVC.

What are its best uses for the building industry?

Due to the workability of the material it is easily milled, cut and built to custom specifications. Decorative trims with detailed designs are quick and easy to produce and with so many variations of sizes, shapes and products, custom PVC products can save time and money.

Anything special I should know about storing PVC products?

These products can be stored on a flat, level surface either inside or outside, but not in extreme heat or cold. Products should be stored as it is intended to be installed. Acclimate PVC products before installation up to 10 hours.

ARCHITECTURAL PVC FAQS

What paint can I use on PVC?

If you choose to paint, use 100% acrylic latex paint with an LRV of 55 or higher. Definition of LRV (Light Reflective Value): LRV is the amount of light reflected from a painted surface. Black has a reflectance value of Zero (0) and absorbs all light and heat. White has a reflectance value of nearly 100 and keeps a building light and cool. All colors fit between these two extremes. Light Reflective Values are given as a percentage. For example, a color with a LRV of 55 means it will reflect 55% of the light that falls on it. For darker colors (LRV of 54 of lower) use paints with heat reflective characteristics specifically formulated for use on vinyl/PVC products. These paints/coatings are designed to reduce excessive heat gain. WARNING: It is recommended that should you choose to paint a darker color (LRV of 54 or lower) all aforementioned installation steps should be followed. Please refer to the painting section in our Trim Installation Guidelines.

What type of fasteners should be used to install PVC?

You will want to use the same fasteners you would use for installing wood trim and siding. They should be stainless steel or hot dipped galvanized and long enough to penetrate the substrate a minimum of 1-1/2”. For best results, use fasteners designed for wood trim and wood siding. These fasteners have a thinner shank, blunt point, and full round head. Standard nail guns work well with PVC. If using pneumatic tools, use a fastener with a full round head and set the pressure so the fastener goes just beneath the surface of the board. IMPORTANT: Staples, brads, and wire nails should never be used. These products have shanks that are too small in diameter to control the thermal expansion and contraction properties of PVC. For a finished look the Cortex fastening system can be used to reduce the need to field apply paint when the trim is going to be left white.

Can PVC trim be used in structural application?

No, PVC cannot be used in structural applications. WARNING: PVC trim products cannot be used in any stress or structural applications. PVC products can only be used as the decorative part of your application; either wood or metal structural components need to be incorporated for structural applications. Check with your architect or builder if your application is structural.

What products are available in PVC?

Corbels, braces, brackets, outlookers, gable brackets and gable pediments, rafter tails, gable vents, arch and flat trim, decorative running trim, ceiling medallions, panels, moulding, columns, pilasters, pediments, shutters, and more.

We also specialize in custom orders for hard-to-find products.

Industry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork.

- Making custom standard with our exclusive PVC product designers

- We have faux wood beams, ceiling medallions, wall panels, columns, balustrade, and much more

design your own with our online builders

RRAC AND OTCTIO YOU CAN COT O.TOODA

EXTERIOR ACRYLIC LATEX

YOU CAN DEPEND ON IT.

SUPERPAINT® PERFORMANCE HAS STOOD THE TEST OF TIME.

You can count on SuperPaint Exterior Latex Paint to deliver outstanding performance and protection against the elements.

SuperPaint is formulated with Advanced Resin Technology. You can apply most sheens in cold weather, even in temperatures as low as 35°F. Once applied, it offers outstanding adhesion and hide – resisting frost in cooler temperatures and chalking,

SUPERPAINT KEY BENEFITS

• Formulated with Advanced Resin Technology for outstanding adhesion and hide.

• Paint and Primer in one

• Withstands the elements and resists peeling and blistering.

• Outstanding coverage and durability. Provides a dirt-resistant and a mildew-resistant coating.

peeling and blistering in hot and humid conditions.

With its fast, efﬁcient application, SuperPaint will increase your production year-round. And with its ability to withstand the elements, it will minimize repaints, keep costs down, and lead to more satisﬁed customers and referrals.

• Low temperature application down to 35°F.

• Available in Flat, Low Lustre, Satin, Gloss and High-Gloss

• High-gloss is ideal for reducing sticking on doors, windows and trim.

• Can be tinted in VinylSafe® Paint Colors — allowing you the freedom to choose from 100 color options, including a limited selection of darker colors formulated to resist warping or buckling when applied to a sound, stable vinyl substrate. See VinylSafe

color palette for colors that can be used.

Backed by a Lifetime Limited Warranty

SUPERPAINT IS BROUGHT TO YOU BY

A NAME YOU KNOW AND TRUST.

For 150 years, Sherwin-Williams has provided contractors, builders, property managers, architects and designers with the trusted products they need to build their business and satisfy customers. SuperPaint is just one more way we bring you industry-leading paint technology – innovation you can pass on to your customers.

Plus with more than 4,100 stores and 2,400 sales representatives across North America, personal service and expert advice are always available near jobsites. Find out more about SuperPaint Premium Exterior Latex Paint at your nearest Sherwin-Williams store, or to have a sales representative contact you, call 800-524-5979.

12/16

Resilience

RESILIENCE® LETS YOU PAINT WITH CONFIDENCE

NO MATTER WHAT THE FORECAST.

EXTERIOR ACRYLIC LATEX

THIS HIGH-HIDING EXTERIOR FINISH

FEATURES EASY APPLICATION, A PREMIUM SMOOTH

FINISH AND EXCEPTIONAL MOISTURE RESISTANCE.

Resilience® Paint is the perfect choice for residential and commercial exteriors. It has outstanding hide, easy brushability and exceptional resistance to moisture.

With Resilience, the threat of rain or dew will not slow down or delay the job because it is specially

™

formulated with breakthrough MoistureGuard technology, resisting moisture twice as quickly as standard exterior latex coatings. Newly painted exteriors develop resistance to moisture in just two

RESILIENCE KEY BENEFITS

• Formulated with exclusive MoistureGuard™ Technology for revolutionary moisture resistance in half the time of traditional latex paints — paint later in the day with conﬁdence and less concern about dew or impending rain.

• Outstanding hide, coverage, durability and dirt resistance.

• Flows and levels for a smooth, uniform ﬁnish.

hours rather than the four-hour minimum most coatings require.

With premium durability, backed by a lifetime limited warranty, you can count on Resilience no matter what the forecast. It is available in ﬂat, satin and gloss and can be applied in temperatures as low as 35°F so crews can work later in the season too.

• Great no matter what the forecast — delivering quality performance in moist or dry climates.

• Low temperature application down to 35°F.

• Available in ﬂat, satin and gloss.

color palette for

Backed by a Lifetime Limited Warranty*

* Two coats of Resilience are required for repaint work; a primer and two coats of Resilience are required for new surfaces.

RESILIENCE IS BROUGHT TO YOU BY

A NAME YOU KNOW AND TRUST.

For 150 years, Sherwin-Williams has provided contractors, builders, property managers, architects and designers with the trusted products they need to build their business and satisfy customers. Resilience is just one more way we bring you industry-leading paint technology – innovation you can pass on to your customers.

Plus, with more than 4,100 stores and 2,400 sales representatives across North America, personal service and expertise are always available near jobsites. Find out more about Resilience Exterior Latex Paint at your nearest Sherwin-Williams store or to have a sales representative contact you, call 800-524-5979.

12/16

Emerald

REVOLUTIONARY TECHNOLOGY.

BEST-IN-CLASS OVERALL PERFORMANCE.

EXTERIOR ACRYLIC LATEX

EXCEPTIONAL DURABILITY, BEAUTY

AND APPLICATION.

Emerald® Exterior Acrylic Latex is a breakthrough paint technology from Sherwin-Williams, offering premium performance that stands the test of time. Featuring rugged resistance to blistering, peeling, chalking, fading and dirt pickup,

EMERALD EXTERIOR ACRYLIC

LATEX KEY BENEFITS

• Features an exclusive cross-linking 100% acrylic technology for exceptional durability and hide.

• Extreme resistance to blistering, peeling, chalking, fading and dirt pickup.

• Self-priming with a smooth, uniform appearance and provides a mildew-resistant coating.

Emerald is self-priming and can be applied in temperatures down to 35°F. Emerald delivers innovative durability, hide and beauty for a truly outstanding ﬁnish.

• Meets the most stringent VOC regulations.

• Low temperature application down to 35°F.

• Available in all Sherwin-Williams colors and custom tints in ﬂat, satin and gloss.

• Use one coat for repaints and two coats for unpainted surfaces. • Backed by a lifetime limited warranty.

EMERALD IS BROUGHT TO YOU BY

A NAME YOU KNOW AND TRUST.

For more than 150 years, Sherwin-Williams has provided contractors, builders, property managers, architects and designers with the trusted products they need to build their business and satisfy customers. Emerald Exterior Acrylic Latex is just one more way we bring you industry-leading paint technology – innovation you can pass on to your customers.

Plus with more than 4,200 stores and 2,700 sales representatives across North America, personal service and expert advice is always available near jobsites. Find out more about Emerald Exterior Acrylic Latex at your nearest Sherwin-Williams store or to have a sales representative contact you, call 800-524-5979.

Duration

FOR EXCELLENT DURABILITY AND HIDE.

EXTERIOR ACRYLIC COATING

ONE-COAT CONVENIENCE ON REPAINTS. EXCELLENT

RESISTANCE TO PEELING AND BLISTERING.

Duration® Exterior Coating is formulated with PermaLast

™

Technology and infused with advanced acrylic co-polymers for long-lasting performance. Duration has a high ﬁlm build and provides a thick, ﬂexible layer which results in excellent hide and protection from peeling and blistering. And Duration now has a longer open

Duration is self-priming and provides a mildewresistant coating. It requires just one coat for repaints and two coats for new work so exterior jobs get done fast. Combine that with premium durability, and you’ll beneﬁt from a wealth of advantages — saving time and money, minimizing callbacks and repaints.

time to easily achieve a smooth appearance.

DURATION KEY BENEFITS

• Formulated with PermaLast™ Technology — for more durability and a thicker coat than ordinary latex paints.

• Excellent protection from cracking, peeling, blistering and dirt pickup. • Meets the most stringent VOC regulations.

• Flash rust resistance minimizes nail head rusting and its tannin bleed resistance is better than conventional latex paints.

• Low temperature application down to 35˚F.

• Self-priming — use one coat for repaints and two coats for unpainted surfaces.

• Available in ﬂat, low lustre, satin and gloss.

Backed by a Lifetime Limited Warranty.

DURATION IS BROUGHT TO YOU BY

A NAME YOU KNOW AND TRUST.

For over 150 years, Sherwin-Williams has provided contractors, builders, property managers, architects and designers with the trusted products they need to build their business and satisfy customers. Duration is just one more way we bring you industry-leading paint technology — innovation you can pass on to your customers.

Plus, with more than 4,200 stores and 2,700 sales representatives across North America, personal service and expertise are always available near jobsites. Find out more about Duration Exterior Latex Paint at your nearest Sherwin-Williams store or, to have a sales representative contact you, call 800-524-5979.

SnapDry

DELIVERS A HARD, DURABLE FINISH, FAST.

™

INTERIOR/EXTERIOR

DOOR AND TRIM PAINT

OUTSTANDING RESULTS,

WITHOUT THE WAIT.

SnapDry™ Interior/Exterior Door and Trim Paint dries in a fraction of the time of other trim paints. With sleek, appealing results in as little as an hour, you’ll increase efﬁciency and reduce downtime. SnapDry eliminates the need to leave doors and windows open for hours after application. It also delivers a

durable ﬁnish that will stand the test of time, both inside and out. This coating will resist dirt and ﬁngerprints as well as UV weathering, for an excellent look that lasts. Plus, SnapDry offers virtually limitless color choices, allowing you to explore the latest interior and exterior color trends.

SNAPDRY DOOR AND TRIM PAINT

KEY BENEFITS

• Dries in as little as one hour, with outstanding block resistance. • Formulated for brush, roller or spray application.

• Versatile interior/exterior acrylic latex. • Waterbased formula offers easy cleanup.

• Exceptional resistance to dirt, ﬁngerprints and UV weathering. • Meets the most stringent VOC regulations with <50 g/L VOCs.

• Extra White, Deep and Ultradeep base options for unlimited color choices.

• Available in satin and semi-gloss.

SNAPDRY IS BROUGHT TO YOU BY

A NAME YOU KNOW AND TRUST

For over 150 years, Sherwin-Williams has provided contractors, builders, property managers, architects and designers with the trusted products they need to build their business and satisfy customers. SnapDry Door and Trim Paint is just one more way we bring you industry-leading paint technology — innovation you can pass on to your customers.

Plus with more than 4,200 stores and 2,700 sales representatives across North America, personal service and expert advice is always available near jobsites. Find out more about SnapDry Door and Trim Paint at your nearest SherwinWilliams store, or to have a sales representative contact you, call 800-524-5979.

Ekena Millwork FRUL5114 Owner Manual

Specifications and Main Features

Frequently Asked Questions

User Manual