__TECNOEKA Srl_________________________________________________________ use and instruction manual _
_ page 4 _________________________________________________________________________________________
1.
1. 1.
1. Technical service
Technical serviceTechnical service
Technical service
A technical check-up once or twice a year helps prolong the life of the appliance and
guarantees better operation. Make sure that assistance is carried out solely and exclusively by
qualified personnel. For any spare parts orders or for any information about the appliance,
always mention the serial number and model (data indicated on the "technical data" plate at
the rear of the oven).
2222.
. .
. General warnings
General warningsGeneral warnings
General warnings
Very important!: keep this instruction book together with the appliance for future
consultation.
These warnings were drafted for your safety and for that of others. Please read them
carefully before installing or using the appliance:
- If, on receipt of the goods, the packaging
packagingpackaging
packaging is damaged, write the following on the delivery
note: “I REVERSE THE RIGHT TO CONTROL THE GOODS
I REVERSE THE RIGHT TO CONTROL THE GOODSI REVERSE THE RIGHT TO CONTROL THE GOODS
I REVERSE THE RIGHT TO CONTROL THE GOODS”, specify the damage and get
the driver to sign in acceptance; send a claim in writing to the seller within 4 calendar
days from the date of receipt. No claim shall be accepted after such period.
- The warehouse inside temperature must not be lower than -9°C; otherwise, the
thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.
- The appliance is intended for professional use and must be utilised by qualified personnel
trained to use it.
- Any modification which may be necessary on the electrical system to enable installation
of the appliance, must be carried out solely by competent personnel.
- It is dangerous to modify or attempt to modify the characteristics of this appliance.
- Never clean the appliance with direct water jets, because, if any water enters, it could
limit the machine's safety .
- Before doing any maintenance or cleaning jobs, disconnect the appliance from the
electrical mains and allow it to cool.
- When the tilting door is wide open, do not put anything on the surface, because the
door hinges could be irreparably damaged.
- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the
nearest Service Centre and use only original spare parts.
N.B.:
N.B.: N.B.:
N.B.: Improper or incorrect use and failure to observe the installation instructions shall release
Improper or incorrect use and failure to observe the installation instructions shall release Improper or incorrect use and failure to observe the installation instructions shall release
Improper or incorrect use and failure to observe the installation instructions shall release
the manufacture from all responsibility.
the manufacture from all responsibility.the manufacture from all responsibility.
the manufacture from all responsibility. In this connection, the directives in the
In this connection, the directives in the In this connection, the directives in the
In this connection, the directives in the
"POSITIONING" paragraph must be strictl
"POSITIONING" paragraph must be strictl"POSITIONING" paragraph must be strictl
"POSITIONING" paragraph must be strictly observed.
y observed.y observed.
y observed.
3.
3. 3.
3. Technical specifications
Technical specificationsTechnical specifications
Technical specifications
Appliance model
Appliance modelAppliance model
Appliance model KF 610
KF 610KF 610
KF 610 KF 620
KF 620KF 620
KF 620 KF 622
KF 622KF 622
KF 622 KF 622 GRILL
KF 622 GRILLKF 622 GRILL
KF 622 GRILL
Cooking chamber Vol.
Cooking chamber Vol.Cooking chamber Vol.
Cooking chamber Vol. (dm3=lt) 54
Convection heating element
Convection heating elementConvection heating element
Convection heating element (kW) 2,5 2,7 1,35
Grill heating
Grill heatingGrill heating
Grill heating----element
elementelement
element (kW) / / 2,0
Weight
WeightWeight
Weight (Kg) 31 33 34
Dimensions of appliance LxD
Dimensions of appliance LxDDimensions of appliance LxD
Dimensions of appliance LxDxH
xHxH
xH (mm)
590x540x595
Power vals.
Power vals.Power vals.
Power vals. (W) CONVECTION MOTORISED VENTILATOR: 50
5050
50
LIGHTING LAMP: 22225555
---- 15
15 15
15 (KF 610)
Max. absorbed power
Max. absorbed powerMax. absorbed power
Max. absorbed power (kW) 2,6 2,8 2,9
Power supply voltage
Power supply voltagePower supply voltage
Power supply voltage (V) (50Hz) 220/230
Class
ClassClass
Class I (against electric shocks)
Degree of protection agai
Degree of protection agaiDegree of protection agai
Degree of protection against humidity
nst humiditynst humidity
nst humidity IPX0
Power cable diameter
Power cable diameterPower cable diameter
Power cable diameter 3x1,5 mm2
Type of cable
Type of cableType of cable
Type of cable H07RN-F
The noise level of the appliance in operation is below 70 dB (A).
The noise level of the appliance in operation is below 70 dB (A).The noise level of the appliance in operation is below 70 dB (A).
The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.
The "technical data" plate is positioned on the rear panel of the appliance.The "technical data" plate is positioned on the rear panel of the appliance.
The "technical data" plate is positioned on the rear panel of the appliance.