eka EKF 523 UD Use And Instruction Manual Use And Instruction Manual

USE AND INSTRUCTION MANUAL

USE AND INSTRUCTION MANUALUSE AND INSTRUCTION MANUAL

USE AND INSTRUCTION MANUAL

MOD

MODMOD

MOD.

. .

. EEEEKF

KF KF

KF 555523

2323

23 UD

UD UD

UD

rev.

rev. rev.

rev. 0000

TECNOEKA

TECNOEKATECNOEKA

TECNOEKA S.r.l.

S.r.l. S.r.l.

S.r.l.

Via

Via Via

Via Marco Polo

Marco PoloMarco Polo

Marco Polo, n.1

, n.1, n.1

, n.11111 ---- 3501

3501 3501

35010000 Borgoricc

BorgoriccBorgoricc

Borgoricco (Padova) Italy

o (Padova) Italyo (Padova) Italy

o (Padova) Italy

Tel. [phone]

Tel. [phone] Tel. [phone]

Tel. [phone] –––– +39.049.5791479 Fax [phone]

+39.049.5791479 Fax [phone] +39.049.5791479 Fax [phone]

+39.049.5791479 Fax [phone]

www.tecnoeka.com

www.tecnoeka.comwww.tecnoeka.com

www.tecnoeka.com E

E E

E----mail:

mail: mail:

mail: [e-mail]

[e-mail]

[e-mail]

__TECNOEKA Srl_______________________________________________________ use and instruction manual _

_ page 2 _____________________________________________________________________________________

Prodotti mirati per Ristorazioni, Pasticcerie,

Prodotti mirati per Ristorazioni, Pasticcerie,Prodotti mirati per Ristorazioni, Pasticcerie,

Prodotti mirati per Ristorazioni, Pasticcerie,
Panetterie e Gastronomie

Panetterie e GastronomiePanetterie e Gastronomie

Panetterie e Gastronomie

TECNOEKA Srl

TECNOEKA SrlTECNOEKA Srl

TECNOEKA Srl
Via Marco Polo, 11
35010 Borgoricco (PD)
Tel. [phone]
Fax + 39 049 5794387
www.tecnoeka.com – [e-mail]

CE

DECLARATION OF CONFORMITY

Annexed document II A, of directive 2006/42/

Annexed document II A, of directive 2006/42/Annexed document II A, of directive 2006/42/

Annexed document II A, of directive 2006/42/EC

ECEC

EC

Manufacturer’s name TECNOEKA Srl

TECNOEKA SrlTECNOEKA Srl

TECNOEKA Srl

Manufacturer’s address Via

Via Via

Via Marco Polo

Marco PoloMarco Polo

Marco Polo, 1

, 1, 1

, 11111 ---- 3501

3501 3501

35010000 Borgoricco

BorgoriccoBorgoricco

Borgoricco (PD)

(PD) (PD)

(PD)

Manager’s name of technical file Minotto Lorenzo

Minotto LorenzoMinotto Lorenzo

Minotto Lorenzo

Manager’s address of technical file Via

Via Via

Via Marco Polo

Marco PoloMarco Polo

Marco Polo, 1

, 1, 1

, 11111 ---- 3501

3501 3501

35010000 Borgoricco

BorgoriccoBorgoricco

Borgoricco (PD)

(PD) (PD)

(PD)

Type of product Elect

ElectElect

Electronic oven

ronic ovenronic oven

ronic oven

Purpose of the product Cooking food

Cooking foodCooking food

Cooking food

Model EEEEKF

KF KF

KF 523 UD

523 UD523 UD

523 UD

TECNOEKA Srl declares that the mentioned above products meet the following safety
regulations:

Low voltage directive 2006/95/CE
Electromagnetic compatibility Directive 2004/108/CE.

TECNOEKA Srl declares that the mentioned above products meet the following harmonised
standards:

CEI EN 60335-1 ; CEI EN 60335-2-42
CEI EN 55014-1 ; CEI EN 61000-3-2 ; CEI EN 61000-3-3
CEI EN 62233

TECNOEKA Srl declares that the mentioned above products meet the following directives:

Machine Directive 2006/42/CE;
Directive on the general safety of products 2001/95/CE;
Directive on the restriction in the use of dangerous substances in electrical and electronic

appliances 2002/95/CE (RoHS);
Directive on waste from electrical and electronic appliances 2002/96/CE (RAEE).

TECNOEKA Srl declares that the mentioned above products meet the
CE 1907/2006 (REACH) Regulation

Borgoricco, 13/03/2014.

________________________________

________________________________________________________________

________________________________

Signature of a Representative of the Board of directors

(CRISTINA LORA)

X:\Sgq\PRODOTTI\Fam. 1 - FORNI\FORNO ELETTRICO\LEka\MANUALI D'USO - Forno Elettrico 40 60 90 -

LEka\Lingua Inglese\NUOVA GAMMA EF\Instruction manual EKF 523 UD - GB - rev. 0.doc

_ Electric Ovens _ rev. 0 ______________________________________________________________EKF 523 UD _

_____________________________________________________________________________________ page 3 _

Index

IndexIndex

Index

1.

1.1.

1. Technical se

Technical seTechnical se

Technical service

rvicervice

rvice

2.

2.2.

2. General warnings

General warningsGeneral warnings

General warnings

3.

3.3.

3. Technical specifications

Technical specificationsTechnical specifications

Technical specifications

4.

4.4.

4. Instructions for the installer

Instructions for the installerInstructions for the installer

Instructions for the installer

5.

5.5.

5. Use instructions (for the user)

Use instructions (for the user)Use instructions (for the user)

Use instructions (for the user)

6.

6.6.

6. Residual risks (for the user)

Residual risks (for the user)Residual risks (for the user)

Residual risks (for the user)

7.

7.7.

7. How to use the control panel

How to use the control panelHow to use the control panel

How to use the control panel

8.

8.8.

8. Oven cooking

Oven cookingOven cooking

Oven cooking

9.

9.9.

9. Cooking advice

Cooking adviceCooking advice

Cooking advice

10.

10.10.

10. Routine cleaning and maintenance

Routine cleaning and maintenanceRoutine cleaning and maintenance

Routine cleaning and maintenance

11.

11.11.

11. Techn

TechnTechn

Technical

ical ical

ical assistance

assistanceassistance

assistance

12.

12.12.

12. Informations to the consumers

Informations to the consumersInformations to the consumers

Informations to the consumers

13.

13.13.

13. Wiring layouts

Wiring layoutsWiring layouts

Wiring layouts

14.

14.14.

14. The Warranty

The WarrantyThe Warranty

The Warranty

__TECNOEKA Srl_______________________________________________________ use and instruction manual _

_ page 4 _____________________________________________________________________________________

1.

1. 1.

1. Technical service

Technical serviceTechnical service

Technical service

A technical check-up once or twice a year helps prolong the life of the appliance and
guarantees better operation. Make sure that assistance is carried out solely and exclusively
by qualified personnel. For any spare parts orders or for any information about the
appliance, always mention the serial number and model (data indicated on the "technical
data" plate at the rear of the oven).

2222.

. .

. General warnin

General warninGeneral warnin

General warnings

gsgs

gs

Very important!: keep this instruction book together with the appliance for future
consultation.

These warnings were drafted for your safety and for that of others. Please read them
carefully before installing or using the appliance:

- If, on receipt of the goods, the packaging

packagingpackaging

packaging is damaged, write the following on the

delivery note: “I REVERSE THE RIGHT TO CONTROL THE GOODS

I REVERSE THE RIGHT TO CONTROL THE GOODSI REVERSE THE RIGHT TO CONTROL THE GOODS

I REVERSE THE RIGHT TO CONTROL THE GOODS”, specify the
damage and get the driver to sign in acceptance; send a claim in writing to the seller
within 4 calendar days from the date of receipt. No claim shall be accepted after such
period.

- The warehouse inside temperature must not be lower than -9°C; otherwise, the
thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.

- The appliance is intended for professional use and must be utilised by qualified
personnel trained to use it.

- Any modification which may be necessary on the electrical system to enable
installation of the appliance, must be carried out solely by competent personnel.

- It is dangerous to modify or attempt to modify the characteristics of this appliance.

- Never clean the appliance with direct water jets, because, if any water enters, it could
limit the machine's safety .

- Before doing any maintenance or cleaning jobs, disconnect the appliance from the
electrical mains and allow it to cool.

- When the tilting door is wide open, do not put anything on the surface, because the
door hinges could be irreparably damaged.

- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact
the nearest Service Centre and use only original spare parts.

N.B.:

N.B.: N.B.:

N.B.: Improper or incorrect use and failure to observe the installation instruct

Improper or incorrect use and failure to observe the installation instructImproper or incorrect use and failure to observe the installation instruct

Improper or incorrect use and failure to observe the installation instructions shall release

ions shall release ions shall release

ions shall release

the manufacture from all responsibility.

the manufacture from all responsibility.the manufacture from all responsibility.

the manufacture from all responsibility. In this connection, the directives in the

In this connection, the directives in the In this connection, the directives in the

In this connection, the directives in the

"POSITIONING" paragraph must be strictly observed.

"POSITIONING" paragraph must be strictly observed."POSITIONING" paragraph must be strictly observed.

"POSITIONING" paragraph must be strictly observed.

_ Electric Ovens _ rev. 0 ______________________________________________________________EKF 523 UD _

_____________________________________________________________________________________ page 5 _

3.

3. 3.

3. Technical specifications

Technical specificationsTechnical specifications

Technical specifications

Dimensions of appliance LxDxH (mm)

Dimensions of appliance LxDxH (mm)Dimensions of appliance LxDxH (mm)

Dimensions of appliance LxDxH (mm) 610x730x660

Weight (Kg)

Weight (Kg)Weight (Kg)

Weight (Kg) 44

Convec

ConvecConvec

Convection heating element (kW)

tion heating element (kW)tion heating element (kW)

tion heating element (kW) 3

Max. absorbed power (kW)

Max. absorbed power (kW)Max. absorbed power (kW)

Max. absorbed power (kW) 3,2

Power supply voltage (V)

Power supply voltage (V)Power supply voltage (V)

Power supply voltage (V) 230V~ (50Hz)

Power cable diameter

Power cable diameterPower cable diameter

Power cable diameter 3x1,5 mm2

Type of cable

Type of cableType of cable

Type of cable H07RN-F

Connecting electric cable

Connecting electric cableConnecting electric cable

Connecting electric cable Tipo Y

Class

ClassClass

Class I

Degree of protection against humidity

Degree of protection against humidityDegree of protection against humidity

Degree of protection against humidity IPX3

Water pressure

Water pressureWater pressure

Water pressure

(kPa) 100-200

The noise level of the appliance in operation is below 70 dB (A).

The noise level of the appliance in operation is below 70 dB (A).The noise level of the appliance in operation is below 70 dB (A).

The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.

The "technical data" plate is positioned on the rear panel of the appliance.The "technical data" plate is positioned on the rear panel of the appliance.

The "technical data" plate is positioned on the rear panel of the appliance.

4.

4. 4.

4. Instructions for the installer

Instructions for the installerInstructions for the installer

Instructions for the installer

The following instructions are aimed at the qualified installer, to ensure that he carries
out the installation, adjustment and maintenance operations as correctly as possible and
according to current legal regulations. Any operation must be performed with electrical
power cut to the appliance.

Before using the appliance, carefully remove the special adhesive film protecting the parts
in stainless steel. Do not leave any glue residues on the surfaces. If necessary, remove them
at once, with an appropriate solvent.

Fitting the feet

Fitting the feetFitting the feet

Fitting the feet - The feet are inside the appliance and must be secured on the four
threaded holes on the base. If necessary, the height of the feet can be adjusted by screwing
or unscrewing.

Positioning

PositioningPositioning

Positioning - Position the appliance perfectly horizontally on a table or similar support (the
table or support must be at least 85 cm above the floor). Position it at a distance of not less
than 10 cm from the side and rear walls, to enable natural ventilating air to circulate freely
around it. The appliance is ventilated through specific openings on the metal walls of the
outer housing , and ensures efficiency and long-life. For this reason it is strictly forbidden to
obstruct these ventilation openings, even partially or for short periods. Failure to observe this

Failure to observe this Failure to observe this

Failure to observe this

specific prohibition releases the manufacturer of th

specific prohibition releases the manufacturer of thspecific prohibition releases the manufacturer of th

specific prohibition releases the manufacturer of the appliance from all responsibility and

e appliance from all responsibility and e appliance from all responsibility and

e appliance from all responsibility and

immediately voids any guarantee rights for the said appliance,

immediately voids any guarantee rights for the said appliance, immediately voids any guarantee rights for the said appliance,

immediately voids any guarantee rights for the said appliance, because its constructive
conformity has been voluntarily compromised. Furthermore, the appliance is not suitable for
embedding and for grouped positioning with other identical appliances.

Electrical connection

Electrical connectionElectrical connection

Electrical connection - The appliance must be connected to the electrical mains according
to current legal regulations. Before making the connection, make sure of the following:

- the voltage and frequency values of the power supply system match the values on
the "technical data" plate affixed on the appliance;

- the limiting valve and the system are able to support the appliance's load (see the
"technical data" plate);

-

the power supply system has an adequate earth connection

the power supply system has an adequate earth connection the power supply system has an adequate earth connection

the power supply system has an adequate earth connection according to current

according to current according to current

according to current

legal regulations;

legal regulations;legal regulations;

legal regulations;

__TECNOEKA Srl_______________________________________________________ use and instruction manual _

_ page 6 _____________________________________________________________________________________

- a omnipolar switch with minimum between-contacts aperture of the overvoltage
category III (4000 V), sized to the load and conforming to current legal regulations, is
fitted between the appliance and the mains in the direct connection to the mains;

- the omnipolar switch used for connection is easy to reach when the appliance is
installed;

- the yellow/green earth wire is not interrupted by the switch;

the yellow/green earth wire is not interrupted by the switch;the yellow/green earth wire is not interrupted by the switch;

the yellow/green earth wire is not interrupted by the switch;

- the power supply, when the appliance is operating, must not deviate from the rated
voltage value by ±10%;

- make sure that after inserting the power supply cord into the terminal block it does
not come into contact with any of the cooking range's hot parts;

- if the supply cable is damaged then it must be replaced by the manufact

if the supply cable is damaged then it must be replaced by the manufactif the supply cable is damaged then it must be replaced by the manufact

if the supply cable is damaged then it must be replaced by the manufacturer or by

urer or by urer or by

urer or by

your technical support or by a qualified person to avoid any risk.

your technical support or by a qualified person to avoid any risk.your technical support or by a qualified person to avoid any risk.

your technical support or by a qualified person to avoid any risk.

Connection to water mains

Connection to water mainsConnection to water mains

Connection to water mains - The oven must be supplied with softened drinking water
with a hardness value of 0.5 to 5°F (it is obligatory to use water softener to reduce the
formation of scaling inside the cooking chamber). The water pressure must be in the range
of 100 to 200 kPa (1.0 – 2.0 bar). If the water pressure exceeds 2.5 bar, install a pressure
reducer device upstream. If the pressure is below 1.5 bar, use a pressure pump to increase
the level.

Water drainage

Water drainageWater drainage

Water drainage

A drain pipe comes out from the rear of the appliance, to drain the oven cavity. This pipe
must be connected up to a pipe made to resist steam temperatures (90°C-100°C) with an
internal diameter of 16mm (DN 16). To prevent choking, it is best to use a rigid pipe and
make sure there are no "elbow" bends anywhere along the drain line.

Furthermore, the drain line must slope down (minimum slope 5%) along its full length (the
length in question is from the appliance's drain pipe to the drain point and must not exceed
2 metres). The drain line must run into an open floor drain (Fig.1). In addition, there must be
a free air gap of at least 25 mm (distance between the drain line coming from the appliance
and the funnel on the drain standpipe). Whatever the case, in order to comply with current
hygiene standards, the line connected to the appliance's drain pipe must not come into
direct contact with the drain point. It is advisable to include a suitable trap in the line
connecting the appliance's drain outlet to the grey water waste system, thus stopping the
steam coming back out of the drain.

FIG.

FIG. FIG.

FIG. 1111 FIG.

FIG. FIG.

FIG. 2222

_ Electric Ovens _ rev. 0 ______________________________________________________________EKF 523 UD _

_____________________________________________________________________________________ page 7 _

Connection of power cable

Connection of power cableConnection of power cable

Connection of power cable - The terminal board is on the rear panel of the appliance.
Open the terminal board cover by obtaining leverage with a screwdriver on the two side
fins. Loosen the cable gripper screw and allow the cable to pass through it. Arrange the
conductors so that the earth conductor is the last to detach from its terminal if the cable
goes into a state of faulty traction. Connect the phase

phasephase

phase conductor to the terminal marked

with the letter "L"

"L""L"

"L", the neutral

neutralneutral

neutral conductor to the terminal marked with the letter "N"

"N""N"

"N" and

the earth

earthearth

earth conductor to the terminal marked with the symbol . Tighten the ring-nut of the
cable gripper and close the terminal board cover. The appliance must be connected to an
equipotential system

equipotential systemequipotential system

equipotential system whose efficiency must first be checked according to current legal
regulations. This connection must be made between different appliances by using the
appropriate terminal marked with the symbol . The equipotential conductor must have a
minimum diameter of 2,5 mm2 The equipotential terminal is at the rear of the appliance.

Safety thermal breaker

Safety thermal breakerSafety thermal breaker

Safety thermal breaker - The appliance has a manually reset safety thermal breaker. It
protects against excessive dangerous over-temperatures which could be accidentally
generated inside the appliance. If the device is tripped, it interrupts electrical power to the
appliance and thus prevents it from operating.

5.

5. 5.

5. Use instructions

Use instructions Use instructions

Use instructions (for the user)

(for the user)(for the user)

(for the user)

This appliance is not intended for use by persons (including children) with reduced phycal,
sensory or mental capabilities, or lack of experience and knowledge. Unless they have
beengiven supervision or instruction concerning use of appliance by a person responsible for
their safety.

Children should be supervised to ensure that they do not play with the appliance

For first use, we advise you to let the appliance to run load-free at maximum temperature
for about one hour. In this way, any unpleasant smells due to thermal insulation and residual
work grease are eliminated.

This appliance must be used solely for the purpose for which it was expressly designed,
i.e. cooking foods in the oven. Any other use is considered unsuitable.

The appliance can be used: for all oven cooking of deserts, pizzas, meat, fish, vegetables,
as well as for gratinating, and for re-conditioning cooled and frozen foods.

When placing food in the cooking compartment, leave a space of at least 40 mm
between pans in order not to over-obstruct air circulation.

Do not use pans with higher than necessary edges: edges are barriers which prevent the
circulation of hot air.

Warm up the oven before every cooking operation to obtain maximum uniformity.

Do not salt foods in the cooking compartment.

6.

6. 6.

6. Residual risks (for the user)

Residual risks (for the user)Residual risks (for the user)

Residual risks (for the user)

After a cooking operation, open the door cautiously, to avoid a violent outflow of heat
which could cause burns.

While the oven is in operation, pay attention to the hot zones (marked on the appliance)
of its external surfaces.

Place the machine on a bench or similar support, at a height of at least 85 cm from the
floor.

The bench or support must be able to support the weight of the machine and house it
correctly.

The appliance contains electrical parts and must never be washed with a jet of water or
steam.

The appliance is electrically connected: before attempting any cleaning operation, cut
power to the appliance.

Do not use the door handle to move the appliance (the glass panel may break).

__TECNOEKA Srl_______________________________________________________ use and instruction manual _

_ page 8 _____________________________________________________________________________________

When the tilting door is wide open, there is the risk that things could be placed on the

surface with the risk of irreparably damaging the door hinges.

7.

7. 7.

7. How to use the control panel

How to use the control panelHow to use the control panel

How to use the control panel

Control Panel symbol legend

Control Panel symbol legendControl Panel symbol legend

Control Panel symbol legend::::

- "End of cooking" programming knob / Programmer indicator light

- Control thermostat knob / Temperature indicator light

- Control humidifier knob / humidifier indicator light

Fig.

Fig. Fig.

Fig. 4444

Fig.

Fig. Fig.

Fig. 5555

Fig.

Fig. Fig.

Fig. 6666

Programmer Knob

Programmer KnobProgrammer Knob

Programmer Knob

Allows start up

of the appliance.

Thermo

ThermoThermo

Thermostate knob

state knobstate knob

state knob

Set the desired temperature

in to the cooking chamber

HHHHumidifier knob

umidifier knobumidifier knob

umidifier knob

Set the desired humidity in to

the cooking chamber.

Programming cooking time

Programming cooking timeProgramming cooking time

Programming cooking time - To run the oven, turn the programmer knob (Fig. 4) in line
with symbol (continuous operation) or in line with the selected cooking time (up to 120
minutes). In the second case, end of cooking is signalled by the oven switching OFF
automatically.

Programming cooking temperature

Programming cooking temperatureProgramming cooking temperature

Programming cooking temperature - Turn the knob of the adjustment thermostat (Fig. 5)
in line with the temperature selected for cooking.

Programming

Programming Programming

Programming vapour quantity

vapour quantityvapour quantity

vapour quantity - To generate vapour while the oven is in operation
(cooking compartment hot), turn the knob of the automatic humidifier (Fig. 6) in line with
the required value (from 1 to 5). If you turn the knob to position • (OFF) the humidifier will
stop operating.

Remember

RememberRemember

Remember

-

If you turn the knob to positions “1” to “4”, the humidifier operates by generating

“1” to “4”, the humidifier operates by generating “1” to “4”, the humidifier operates by generating

“1” to “4”, the humidifier operates by generating

vapour

vapour vapour

vapour (water is introduced into the cooking compartment) at automatically adjusted,

at automatically adjusted, at automatically adjusted,

at automatically adjusted,

cyclically repeated time intervals

cyclically repeated time intervalscyclically repeated time intervals

cyclically repeated time intervals (The higher the number the higher the humidifier
operating time and thus a higher quantity of vapour is produced).

-

If you turn the knob to position "5", automatic control of the humidifier is disabled

"5", automatic control of the humidifier is disabled "5", automatic control of the humidifier is disabled

"5", automatic control of the humidifier is disabled - it
now operates by continuously introducing water into the cooking compartment
(continuous production of vapour).

-

Before beginning to run the automatic humidifier, stabilise the temperature inside the
cooking compartment at a value of at least 110°C, order to optimise vapour production.

_ Electric Ovens _ rev. 0 ______________________________________________________________EKF 523 UD _

_____________________________________________________________________________________ page 9 _

Control thermostat indicator light

Control thermostat indicator lightControl thermostat indicator light

Control thermostat indicator light - The control thermostat orange indicator light goes
OFF whenever the programmed temperature is reached inside the cooking compartment. It
lights up again when the thermostat is tripped to re-establish this temperature.

"End of cooking" programmer indicator light

"End of cooking" programmer indicator light"End of cooking" programmer indicator light

"End of cooking" programmer indicator light - The programmer orange indicator light
indicate that the oven is operating and that cooking time is active.

Oven internal light

Oven internal lightOven internal light

Oven internal light - The light is always on when the oven is operating.

8.

8. 8.

8. Oven cooking

Oven cookingOven cooking

Oven cooking

For cooking, before putting food in, warm up the oven to the required temperature.
When the oven reaches the temperature, put the food in and check cooking time. Switch
off the oven 5 minutes before the theoretical time in order to recover stored heat.

Convection cooking (dry heat)

Convection cooking (dry heat)Convection cooking (dry heat)

Convection cooking (dry heat) - Operate the oven and turn the thermo state knob to the
desired temperature.

Convection cooking + steam (dry heat + wet heat)

Convection cooking + steam (dry heat + wet heat)Convection cooking + steam (dry heat + wet heat)

Convection cooking + steam (dry heat + wet heat) - Operate the oven and turn the
thermo state knob to the desired temperature and the humidifier knob the desired steam
quantity.

9999.... Cooking advice

Cooking adviceCooking advice

Cooking advice

Convection cookin

Convection cookinConvection cookin

Convection cookingggg - Heat is transferred to the foods by pre-heated air, forced to
circulate by in the cooking chamber. The heat quickly and uniformly reaches all parts of the
chamber, enabling simultaneous cooking of different types of food (providing they have the
same cooking temperature), placed on the shelves without mixing tastes and smells.
Convection cooking is particularly convenient for rapid de-freezing, and for sterilising
preserves and drying mushrooms and fruit.

Cooking desserts

Cooking dessertsCooking desserts

Cooking desserts - Desserts require a very high temperature (usually from 150 to 200°C)
and a pre-heated oven (about ten minutes). The oven door must not be opened until at least
3/4 of the cooking time has elapsed. Whipped dough must be difficult to detach from a
spoon because excessive fluidity would prolong cooking time to no avail.

Cooking meat

Cooking meatCooking meat

Cooking meat - Meat to be cooked should weight at least 1 Kg to prevent it drying too
much. Very tender red meats to be cooked rare, which must be cooked on the outside to
keep all their gravy, require short cooking time at high temperature (200-250°C). The gravy
ingredients must be placed immediately in the pan only if the cooking temperature is brief,
otherwise they should be added during the last half-hour. You can check the degree of
cooking by squashing the meat with a spoon: if the meat does not yield, it is correctly
cooked. For roast beef and fillet, which must remain pink inside, cooking time must be very
brief. Meats may be placed on a plate suitable for oven cooking or directly on the grill,
under which you should place a tray to collect the gravy. When cooking has finished, we
advise you to wait for 15 minutes before cutting the meat so that the gravy does not come
out. Before being served, the dishes may be kept hot in the oven at minimum temperature.

__TECNOEKA Srl_______________________________________________________ use and instruction manual _

_ page 10 _____________________________________________________________________________________

10

1010

10.... Routi

RoutiRouti

Routine cleaning and maintenance

ne cleaning and maintenancene cleaning and maintenance

ne cleaning and maintenance

(WARNING:

(WARNING:(WARNING:

(WARNING: Cut power to the appliance before every operation)

Cut power to the appliance before every operation)Cut power to the appliance before every operation)

Cut power to the appliance before every operation)

General cleaning

General cleaningGeneral cleaning

General cleaning - Clean the oven when it is cold. Wash enamelled parts with lukewarm
water and soap, do not use abrasive products, steel wool, or acids, which could ruin them.
To clean the steel parts, do not use products containing chlorine (sodium hypochlorite,
hydrochloric acid, etc) even if diluted. Use specific off-the-shelf products or a little hot
vinegar. Rinse thoroughly with water and dry with a soft cloth. Clean the glass door of the
oven with hot water only, and do not use rough cloths. Do not allow foods (especially acid
foods such as salt, vinegar, lemon, etc) to stagnate on the stainless steel parts, because they
could deteriorate. Do not wash the appliance with direct jets of water, because if water
enters, this could limit the appliance's safety. Do not use corrosive substances (e.g.
hydrochloric acid) to clean the oven' s support bench.

Cleaning the oven

Cleaning the ovenCleaning the oven

Cleaning the oven - It is good practice to clean the oven interior at the end of every day
of duty. In this way it will be easier to remove cooking residues, preventing them from
burning when the oven is next used. Clean it accurately with hot water and soap or with the
appropriate off-the-shelf products.

Replacing oven

Replacing ovenReplacing oven

Replacing oven lamp

lamp lamp

lamp - Electrically switch off the appliance; unscrew the protective glass
cap; unscrew the lamp and replace it with another lamp suitable for high temperatures
(300°C), with the following characteristics:

- Voltage 230/240 V

- Power 15 W

- Fitting E 14
Refit the glass cap and power up the appliance.

11

1111

11.... Technical assistence

Technical assistence Technical assistence

Technical assistence

Before leaving the factory, the appliance was completely regulated and tested by expert

specialised personnel to guarantee the best operating results.

All repairs and settings must be performed with utmost care and attention, respecting
national safety regulations in force. Always contact your retailer or our nearest Service
Centre, giving details of the problem, the appliance model and the serial number (on the
rating plate on the rear panel).

For any maintenance the user can contact Tecnoeka by calling the telephone numbers on
the cover or going to www.tecnoeka.com

www.tecnoeka.comwww.tecnoeka.com

www.tecnoeka.com.

11112222.

. .

. Informations to the consumers

Informations to the consumersInformations to the consumers

Informations to the consumers

Further to Directive 2002/96/EC, the symbol of the crossed rubbish skip
on the appliance means that at the end of its life, the product must be
disposed of separately from the other rubbish. The user must hand the
appliance to a specialised waste collection centre for electric and
electronic equipment.
The separate collection of the rubbish and subsequent treatment, recovery and disposal help
to produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively, administrative sanctions would be applied.

_ Electric Ovens _ rev. 0 ______________________________________________________________EKF 523 UD _

_____________________________________________________________________________________ page 11 _

11113333.

. .

. Wiring layouts

Wiring layoutsWiring layouts

Wiring layouts

Key

KeyKey

Key

M Power terminal board
T1 Safety thermostat
T2 Oven thermostat
L Oven lighting lamp
R Circular heating-element
V1 Oven motorised ventilator
V2 Tangential motorised ventilator
C Condensatore
Pr "End of cooking" programmer

S1 Programmer indicator light
S2 Thermostat indicator light
S3 Humidity indicator light
IM Operating direction reversing element
U Automatic humidifier
E Humidifier solenoid-valve
MI Door microswitch
B1 Contactor coil
B2 Contactor relais

__TECNOEKA Srl_______________________________________________________ use and instruction manual _

_ page 12 _____________________________________________________________________________________

11114. The Warranty

4. The Warranty4. The Warranty

4. The Warranty

Your appliance is covered by warranty. The seller will replace or repair (and his decision will be
final), free of charge for the customer, only those parts that are defective due to a manufacturing
fault on condition that, under penalty of forfeiture:

− for domestic equipment, the customer notifies the fault within two months from the date
when he/she discovered it and anyway within 2 years form the date of purchase;

− for professional equipment, the customer notifies the fault within 8 days from the date when
he/she discovered it and anyway within 12 months from the date of purchase,

by registered letter with acknowledgement of receipt and enclosing the invoice or receipt proving
the purchase.
Apart from the case when the customer cannot produce the invoice or receipt proving the purchase
or when the above-mentioned terms are not complied with, the warranty is expressly excluded

warranty is expressly excluded warranty is expressly excluded

warranty is expressly excluded in the

following cases:

1) faults or breakage caused by the transport;

2) wrong or incorrect installation of the product (for instance because of insufficient draught of
the flue or exhausts) in light of the instructions given in the user’s handbook supplied with
the product;

3) inadequate or abnormal electrical, hydraulic and/or gas supplies;

4) carelessness, negligence or incompetence in using the product in light of the instructions
given in the user’s handbook supplied with the product;

5) use of the product for uses different from the one for which it was built or anyway in a
manner not compliant with the instructions given in the user’s handbook supplied with the
product;

6) tampering with the product;

7) adjustments and/or maintenance and/or repairs carried out by unauthorised personnel and/or
with non original spare parts;

8) inadequate or careless maintenance of the product in contrast with the user’s handbook
supplied with the product;

9) damages caused by fire, natural disasters and accident as well as by any cause not
attributable to TECNOEKA SRL.

The warranty explicitly excludes

The warranty explicitly excludesThe warranty explicitly excludes

The warranty explicitly excludes: varnished or enamelled parts, knobs, handles, movable or
removable plastic parts, bulbs, glass parts, refractories and any accessories.

TECNOEKA SRL cannot be held responsible for any damages, either direct or indirect, caused by the
product breaking down or following its non-use.

Any repairs carried out during the warranty do not cause said warranty to be extended or renewed.

Nobody is authorised to modify the terms and conditions of the warranty or to issue new verbal or
written warranties.

The warranty is valid only for appliances installed in the European Union.

The warranty is valid only for appliances installed in the European Union.The warranty is valid only for appliances installed in the European Union.

The warranty is valid only for appliances installed in the European Union.

Any dispute shall be settled by the competent Court in Padua.

Warning for the Buyer:

Warning for the Buyer:Warning for the Buyer:

Warning for the Buyer:

1. the cooking appliance is designed only for cooking purposes while the heating appliance is
designed only for heating domestic environments;

2. TECNOEKA S.r.l. does not install the appliances; the seller shall be responsible for any
installation carried out;

3. TECNOEKA S.r.l. cannot be held responsible for any damages, either direct or indirect, to
people, pets or property caused by the appliance breaking down or following its non-use.

The Manufacturer cannot be held responsible for any inaccuracies due to misprints or mistakes in
copying in this handbook. The Manufacturer reserves the right to modify the products as he deems
fit, also in the interest of the user, without affecting the vital characteristics of functionality and
safety.