eka EKF 416 AL P, EKF 464 AL P Use And Instruction Manual

USE AND INSTRUCTION MANUAL

MODD. EKF 416 AL P – EKF 464 AL P

rev. 5

TECNOEKA S.r.l.

Via Marco Polo, n.11 - 35010 Borgoricco (Padova) Italy

Tel. [phone] Fax [phone]

www.tecnoeka.com E-mail: [e-mail]

TECNOEKA Srl ______________________________________________________________ use and instruction manual

page 2 ___________________________________________________________________________________________

EU DECLARATION OF CONFORMITY

Annexed document II A, of directive 2006/42/EC

Manufacturer’s name

TECNOEKA Srl

Manufacturer’s address

Via Marco Polo, 11 - 35010 Borgoricco (PD)

Manager’s name of technical file

Minotto Lorenzo

Manager’s address of technical file

Via Marco Polo, 11 - 35010 Borgoricco (PD)

Type of product

Electronic oven

Purpose of the product

Cooking food

Model

EKF 416 AL P – EKF 464 AL P

TECNOEKA Srl declares that the mentioned above products meet the following safety
regulations:

Machine Directive 2006/42/EC;

Electromagnetic compatibility directive 2014/30/EU

TECNOEKA Srl declares that the mentioned above products meet the following harmonised
standards:

EN 60335-1 ; EN 60335-2-42
EN 55014-1 ; EN 61000-3-2 ; EN 61000-3-3 ; EN 62233

TECNOEKA Srl declares that the mentioned above products meet the following directives:

Directive on the general safety of products 2001/95/EC;
Directive on the restriction in the use of dangerous substances in electrical and electronic

appliances 2011/65/EU;
Directive on waste from electrical and electronic appliances 2012/19/EU.

TECNOEKA Srl declares that the mentioned above products meet the
(EC) 1907/2006 Regulation

Borgoricco, 07/02/2017.

________________________________

Signature of a Representative of the Board of directors

(CRISTINA LORA)

Electric Ovens rev. 5________________________________________________________ EKF 416 AL P - EKF 464 AL P

__________________________________________________________________________________________ page 3

Index

1.

Technical service

2.

General warnings

3.

Technical specifications

4.

Instructions for the installer

5.

Use instructions (for the user)

6.

Residual risks (for the user)

7.

How to use the control panel

8.

Oven cooking

9.

Cooking advice

10.

Routine cleaning and maintenance

11.

Technical assistance

12.

Informations to the consumers

13.

Wiring layouts

14.

The Warranty

15.

Availability and supply of spare parts

X:\Sgq\PRODOTTI\1 - FORNI\FORNO ELETTRICO\LEka\MANUALI D'USO - Forno Elettrico 40 60
90 - LEka\Lingua Inglese\NUOVA GAMMA EF\Instruction manual EKF 416 AL P - EKF 464 AL P

- GB - rev. 5..doc

TECNOEKA Srl ______________________________________________________________ use and instruction manual

page 4 ___________________________________________________________________________________________

1. Technical service

A technical check-up once or twice a year helps prolong the life of the appliance and guarantees
better operation. Make sure that assistance is carried out solely and exclusively by qualified
personnel.
For any spare parts orders or for any information about the appliance, always mention the serial
number and model (data indicated on the "technical data" plate at the rear of the oven).

2. General warnings

Very important!: keep this instruction book together with the appliance for future consultation.
These warnings were drafted for your safety and for that of others. Please read them carefully
before installing or using the appliance:

- If, on receipt of the goods, the packaging is damaged, write the following on the delivery

note: “I REVERSE THE RIGHT TO CONTROL THE GOODS”, specify the damage and get the
driver to sign in acceptance; send a claim in writing to the seller within 4 calendar days
from the date of receipt. No claim shall be accepted after such period.

- The warehouse inside temperature must not be lower than -9°C; otherwise, the

thermostat (regulation and safety thermostat) control devices of the machine will be
damaged. Failure to observe this prohibition invalidates any responsibility of the
manufacturer of the machine.

- The appliance is intended for professional use and must be utilised by qualified personnel

trained to use it.

- Any modification which may be necessary on the electrical system to enable installation of

the appliance, must be carried out solely by competent personnel.

- It is dangerous to modify or attempt to modify the characteristics of this appliance.

- Never clean the appliance with direct water jets, because, if any water enters, it could limit

the machine's safety .

- Before doing any maintenance or cleaning jobs, disconnect the appliance from the

electrical mains and allow it to cool.

- When the tilting door is wide open, do not put anything on the surface, because the door

hinges could be irreparably damaged.

- Do not attempt to carry out the periodic controls or any repairs by yourself. Contact the

nearest Service Centre and use only original spare parts.

N.B.: Improper or incorrect use and failure to observe the installation instructions shall release the

manufacture from all responsibility. In this connection, the directives in the "POSITIONING"
paragraph must be strictly observed.

3. Technical specifications

Dimensions of appliance LxDxH (mm)

790x750x635

Weight (Kg)

50,4

Maximum load per tray GN1/1-600x400mm (kg)

4 – 2

Maximum load GN1/1-600x400mm (kg)

16 - 8

Convection heating element (kW)

6

Max. absorbed power (kW)

6,4

Power supply voltage (V)

380V~ (50/60Hz)

Power cable diameter

4x2,5 mm2

Type of cable

H07RN-F

Connecting electric cable

Tipo Y

Class

I

Degree of protection against humidity

IPX3

The noise level of the appliance in operation is below 70 dB (A).
The "technical data" plate is positioned on the rear panel of the appliance.