EK SHOWPRO eprofile hp User Manual
LED PROFILE SPOT - HIGH POWER
2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are therefore marked with
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make
risk an electric shock.
•
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
- in places subject to vibrations or bumps;
- in places with a temperature of over 40 °C.
.
an inspection or contact the manufacturer directly.
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Always additionally secure the projector with the safety rope. When carrying out any work, always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• Do not touch the product’s housing when operating because it may be very hot.
3
TABLE OF CONTENTS
Safety
General instructions
Warnings and installation precautions
General information
Introduction
Features
Specications
Maintenance
Cleaning the unit
Fuse replacement
Trouble shooting
Overview
Dimensions
Operation
Display menu functions
DMX functions
DMX pin diagram
Menu Function Chart
Photometrics
Packing content
DMX Function Chart
EPROFILE HP
• Mounting bracket
• Power cord
• Warranty card
• User manual
4
INTRODUCTION
The EPROFILE HP is a high-output LED prole.
FEATURES
- Crisp gobo image projection, even at close range
- Extremely at eld projection
- Higher output than traditional 750W ellipsoidal reector spotlights
- 200W LED with extremely high light output
- Flawless dimming with consistent color temperature throughout the dimming curve
- Flicker-free output with selectable PWM frequencies for worry-free video
- Quiet operation suitable for studio use
- Power linking (PowerCon In/Out)
- Rugged die-cast body and low-maintenance design
- Master/Slave mode, Auto Shows
- Manual control via onboard menu
- Selection of four dimming curves
- DMX control
- Available lens tubes: 19° - 26° - 36° or 50° (not included)
SPECIFICATIONS
Light Source: 200W COB 3000K (CRI: 93)
Beam Angle: 19° / 26° / 36° / 50°
Output: 7232 / 5115 / 3330 / 1415 LUX @ 5 meters
Focus: Manual
Strobe: 0-30 Hz
Dimming: 4 dimming curve modes
Control: DMX
DMX Channels: 2 / 3 / 6
Built-in Programs: Yes
Display: OLED function menu with 4 touch buttons
Mains: 100V-240V, 50/60 Hz
Consumption: 205W
Power connections: Neutrik PowerCon In/Out
Data connections: 5-pin XLR In/Out for DMX
Housing: Diecast aluminium
Finish: Matte black
IP rating: IP20
Cooling: Active (variable speed fan)
Operating temperature: 0°C to 40°C
Max. Housing: 54°C
Dimensions: 528 x 342 x 526 mm
Weight: 7.11 KG
Loading...