EK E3 Spot Show Pro User Manual
E3spot
USER MANUAL
www.eklights.com
TABLE OF CONTENTS
SAFETY
DIMENSIONS
DESCRIPTION
INTRODUCTION
POWER LINKING
PHOTOMETRICS
DMX CONNECTION
GOBO MOUNTING AND REPLACEMENT
TECHNICAL SPECIFICATIONS
FUNCTION MENU
MENU DESCRIPTION
01
02
03
03
05
05
06
07
08
09
10
DMX CHANNELS
TROUBLESHOOTING
12
17
Before carrying out any operations with the unit, carefully read this instruction
manual and keep it for future reference. It contains important information about the
WARNING
installation, usage and maintenance of the unit.
SAFETY
General Instructions
The products referred to in this manual conform to the European Community Directives
Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual.
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1).
This unit is not for home use, only professional applications.
Never use the fixture under the following conditions:
-in wet conditions;
-
in places subject to vibration;
-in places with an ambient temperature of over 45°C
Make certain that no inflammable liquids, water or metal objects enter the fixture.
All work must always be carried out by qualified technical personnel. Contact the nearest sales point
for an inspection or contact the manufacturer directly.
If the unit i s to be put out of oper ation definitively, take it to a local recycling plant for a disp osal
Warnings and installation precautions
If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void.
Before starting any maintenance work or cleaning the projector, cut off power from the main suply.
Always secure the projector with safety rope when mounting. When carrying out any work, always comply
scrupulously with all the regulations (particularly regarding safety) currently in force in the country
the fixture’s being used.
For inside use on ly. Not desi gned for outside u se.
The minimum distance between the fixture and surrounding walls must be more than 50cm and the
air vents at the housing must not be covered.
Install the fixture in a well ventilated place
.
in which
Keep any inflammable material at a safe distance from the fixture.
The maximum temperature that can be reached on the external surface of the fitting, in a thermally steady
state, is high. After power off, please cool down over 15 minutes.
Never look directly at the light beam. Please note that fast changes in lighting, e.g. flashing light,
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
01
www.eklights.com
DIMENSIONS
250
8.133
75.5 222.8
02
DESCRIPTION
Compact, quick, feature-packed moving head
1 x 60W OSRAM RGBW LED
Infinite RGBW color mixing with 7 gobos + open
Ultra smooth dimming and perfectly consistent color mixing
Advanced optical system projects saturated colors
Flawless motorized pan/tilt movement and gobo indexing
Selectable DMX channels 15/18/23
INTRODUCTION
1
3
16
15
5
4
14
6
2
13
03
7
12
8
11
9
10
www.eklights.com
INTRODUCTION
1. Safety Rope Mounting Hole
5. Up
9. DMX 3-Pin XLR Out
13. Down
PANEL INTRODUCTION
OLED Display Function Description
Function
DMX
power
left
right
up
down
enter
2. Handle
6. Right
10. InDMX 3-Pin XLR
14. Confirm
Function Description
DMX signal indicator
increase numeric values
decrease numeric values
3. Power Indicator
7. POWER CON In
11. Main Fuse Holder
15. OLED Display
power indicator
scroll left
scroll right
confirm
4. Left
8. POWER CON Out
12. Clamp Fast Holder
16. DMX Indicator
Function
status indicator
status indicator
menu navigation
menu navigation
scroll up
scroll down
save the parameter
STANDARD GOBOS
04
Loading...