EK DP-2 User Manual

DP-2

Wireless Contact Sensor

User manual

1

Features

The wireless contact sensor is an accessory of smart alarm system. It’s
fashion design, energy saving, and low battery warning supported. The
system would inform users to replace the battery by App when needed. It’s
easy to setup and works well with most doors and windows. When trans­mitter and magnet are apart, the sensor triggers alarm. Transmitter can be
put on either of magnet’s left or right side.

Parameters

Working Voltage

Battery

Working Current

Standby Current

Transmission
distance

Transmission
frequency

Working
Temperature

Humidity < 90% (non-condensing)

Dimension

Weight

CC 3V

1 × CR2032 button battery (3V)

20mA

2μA

Without obstacle 200m

433,92MHz

-10°C~40°C

35.5g(battery not included) 40g(battery included)

Transmitter: 80.0mm*38.2mm*13.3mm Magnet:

80.0mm*14.8*12.9mm (L*W*H)
Magnet: 80.0mm*14.8*12.9mm (L*W*H)

2