Page 1
PRIVACY SCREENS
English
User Manual
Page 2
2
INTRODUCTION
Type 1
Horizontal 3 Stack Module
Dimension: 4x6 feet
Type 2
Vertical 3 Stack Module
Dimension:6x4 feet
Type 3
Free Standing 3 Stack Stand
(come with different Setup
Hardware as Type 1 and 2
Introducing the Highlander Home Inc. Screen assembly manual. In this manual, we will show
you how to assemble your own Privacy Screen. Before beginning the assembly, make sure that
there is ample room for installing and assembling your product. The amount of Base Shelf Trays
with your assembly may also vary depending on the type of product purchased. In this manual,
we offer the installation guideline of 3 different basic setups of privacy fence. You can use this
as guideline to setup the privacy fence with your own configuration or customization.
basket, and 5 KG per small bracket. Some
Page 3
3
PRIVACY SCREEN VARIANTS
TYPE 1
TYPE 2
TYPE 3
There are unique patterns and variations for you to choose from for your ideal assembly of
the Privacy Screen. Below are the available options that HighLander offers that suit your
desired
information. Please visit www.youshouldhaveit.com or contact info@youshouldhaveit.com. We
offer favorable discount if you purchase from our website.
pattern and variation. We offer variety of patterns and configurations, for more
`
Page 4
4
PARTS
Privacy Screen
Your screen will be secured with two posts
and optional brackets.
Post Base
A total of two posts will support
your privacy screen
Poles/Brackets
A total of two brackets will keep
your screen secured to the
posts. If you decide not to use
brackets, there will be an
alternative step.
Bolt and Nut Assembly
Dimensions of your door panel may
vary, but should match with the
general height of your cabinet. Please
refer to pages 10 and 11 for further
information
Stainless Steel Wedge
Expansion Anchor
Is used to secure the pole in the
ground
L-Shaped Hex Key
Wrench
Metal Screw
Is used to connect the pole
with metal panels
Below is a breakdown of how the parts will come together for your final product, as detailed in a
simplified exploded view below
Page 5
5
HORIZONTAL 3 STACK MODULE
Type 1
Scan to play installation Video for Horizontal 3 stack
module
Or you can type in the following address to get the
video
https://youtu.be/7_0kQTvqPtE
Note: the pole installation might be
Different as we are transitioning to 2pc pole and base setting
Not all installs require posts. Highlander Privacy Screens are designed to also be mounted to
custom pillars, framed in wood, or other surfaces. It’s as easy as just face mounting them or
building a frame for them to sit in.
●
The following pages will show how to install the privacy screen in Horizontal 3
stack module. If you wish to install the screen in Vertical stacking, please refer to
page 10.
Page 6
6
Step 1 - Choose a desired location and measure
INSTRUCTIONS
2.
Have adequate space for installation
1.
Begin Step One by choosing a desired location and
gather the required tools to assist you in measuring the
specifications and dimensions to set up your privacy
screen
Mark Anchor Bolt spots and Install the
post and secure at appropriate distance
Once your desired location has been determined,
mount the post to the location and move on to next
step.
Secure the post
3.
Drill the Hole to secure Anchor bolt. Drill Bit might
not include.
bolts, two on each corner of the post, as shown.
installation.
Secure
post using a total of four Anchor
Page 7
7
Step 2 - Install the brackets and privacy screen
INSTRUCTIONS
1.
2.
3.
4.
Connect metal panels with metal screws
Assemble all three screens with screw by aligning the
privacy
it becomes flush with the each other
another person to keep the privacy screen intact.
Connect the metal panels with Presetup pole using metal screws
Secure the privacy screen to the bracket using the
metal screws. Tighten the hardware while holding
the parts into place.
screen into appropriatescrew places so that
and have
Backup the metal screws previously connected
panels
Use drill bit to enlarge the holes, Reconnect the
panels using screws and bolts. Tighten the bolt and
nut using the L shape wrench, Setup another pole
and connect the other end of the panel to pole.
Repeat the entire procedure for each additional
privacy screen, ifdesired
For each additional privacy screen, simply repeat the
entire procedure until the total amount of privacy
screens installed is
sufficient.
Page 8
8
VERTICAL 3 STACK MODULE
Type 2
Scan to play installation Video for Vertical 3 stack
module
Or you can type in the following address to get the
video
https://youtu.be/chC56q8gDoY
Note: the pole installation might be
Different as we are transitioning to 2pc pole and base setting
Not all installs require posts. HighLander Privacy Screens are designed to also be mounted
to custom pillars, framed in wood, or other surfaces. It’s as easy as just face mounting them
or building a frame for them to sit in.
●
The following pages will show how to install the privacy screen in Vertical 3
stack mode. If you wish to install the screen which can be relocated and
anchored to the ground when necessary , please refer to page 13.
Page 9
9
Step 1 - Choose a desired location and measure
INSTRUCTIONS
2.
Have adequate space for installation
1.
Begin Step One by choosing a desired location and
gather the required tools to assist you in measuring the
specifications and dimensions to set up your privacy
screen
Mark Anchor Bolt spots and Install the
post and secure at appropriate distance
Once your desired location has been determined,
mount the post to the location and move on to next
step.
Secure the post
3.
Drill the Hole to secure Anchor bolt. Drill Bit might
not include.
bolts, two on each corner of the post, as shown.
installation.
Secure
post using a total of four Anchor
Page 10
10
Step 2 - Install the privacy screen
INSTRUCTIONS
2.
3.
4.
1.
Connect metal panels with metal screws
Assemble all three screens with screw by aligning the
privacy
it becomes flush with the each other
another person to keep the privacy screen intact.
Connect the metal panels with Presetup pole using metal screws
Secure the privacy screen to the bracket using the
metal screws. Tighten the hardware while holding
the parts into place.
screen into appropriatescrew places so that
and have
Backup the metal screws previously connected
panels
Use drill bit to enlarge the holes, Reconnect the
panels using screws and bolts. Tighten the bolt and
nut using the L shape wrench, Setup another pole
and connect the other end of the panel to pole.
Repeat the entire procedure for each additional
privacy screen, ifdesired
For each additional privacy screen, simply repeat the entire
procedure until the total amount of privacy screens installed
is
sufficient.
Page 11
11
3pcs Free Standing Privacy Fence Installation
Type 3
Short Vertical Bar
To connect 3rdsheet with 2
nd
and bracket
Triangular Base
To connect base and
long vertical bar
Long Vertical Bar
To connect 1stand 2
nd
sheets with base and
together
U Base
To connect brackets and
Floor (Optional)
Scan to play installation Video for 3pc free
stand module. Or you can type in the following
address to get the video
https://youtu.be/BLfNYnlJ8cAok
Screws and Nuts
L-Shaped Hex Key
Wrench
This product is different from previous type 1 and 2. It comes with different installation hardware. It is
free standing privacy fence. It can be relocated and anchored to the ground when necessary (anchor
stake is not included)
●
The following pages will show how to install the privacy screen in 3pc free stand
module. If you wish to install the screen with the provided singlebrackets, please
refer to page 6
Page 12
12
Step 1 - Choose a desired location and measure
INSTRUCTIONS
2.
Have adequate space for installation
1.
Begin Step One by choosing a desired location and gather the
required tools to assist you in measuring the
specifications
and dimensions to set up your privacy screen
Install the posts Base and secure them (OPTIONAL)
Once your desired location has been determined, Place
the posts to the location, mount (OPTIONAL) and install
them at appropriate distance.
Secure the Base with triangular Part
3.
Align the parts according to the holes and install Triangular
part with the base using the L key, two on each corner of
the post Bases, as shown. Take care not to over tighten the
bolts.
installation.
Install the Vertical Bracket and secure
4.
them
Locate the two Brackets and align them to the top of the
triangular part. Secure the bracket to the posts base by
Screws using the L key again.
Page 13
13
Step 2 - Install the privacy screen
INSTRUCTIONS
2.
3.
4.
Locate thebrackets andline upintoplace
1.
Begin Step Two by locating the privacy screen to the inner
sections of the post and line up the brackets to the holes,
as shown. Have another person assist you and keep the
screen intact.
Secure the privacy screen using screws
Secure the privacy screen using a total of ten screws,
for each side. Tighten the screws using L key
Use the short bracket bar for 3rdsheet
and repeat these steps for the remaining
hardware
Add short expansion bars with installed panel Insert
3rd panel and secure with screws
using the L key again. Repeat these steps for the remaining
screws and sheets.
. Tighten the screws
five
.
Repeat the entire procedure for each additional
privacy screen, ifdesired
For each additional privacy screen, simply repeat the entire
procedure until the total amount of privacy screens installed
is
sufficient.
Page 14
Technical support
Get in touch with us and
we’d love to answer all
your questions or
comments. We have our
team ready to help with
anything you need.
www.youshouldhaveit.com
info@youshouldhaveit.com
There are unique patterns and variations for you to choose for your ideal assembly of
the Privacy Screen. Below are the available options that Highlander offers that suit your
desired pattern and variation. We offer variety of patterns and configurations. For more
information, Please, visit
www.youshouldhaveit.com
Or contact information
info@youshouldhaveit.com
We offer favorable discount if you purchase from our website.
HighLander Home Inc.
info@youshouldhaveit.com © HighLander Screens 2012
Loading...