Page 1
11
3pcs Free Standing Privacy Fence Installation
Type 3
Short Vertical Bar
To connect 3rdsheet with 2
nd
and bracket
Triangular Base
To connect base and
long vertical bar
Long Vertical Bar
To connect 1stand 2
nd
sheets with base and
together
U Base
To connect brackets and
Floor (Optional)
Scan to play installation Video for 3pc free
stand module. Or you can type in the following
address to get the video
https://youtu.be/BLfNYnlJ8cAok
Screws and Nuts
L-Shaped Hex Key
Wrench
This product is different from previous type 1 and 2. It comes with different installation hardware. It is
free standing privacy fence. It can be relocated and anchored to the ground when necessary (anchor
stake is not included)
●
The following pages will show how to install the privacy screen in 3pc free stand
module. If you wish to install the screen with the provided singlebrackets, please
refer to page 6
Page 2
12
Step 1 - Choose a desired location and measure
INSTRUCTIONS
2.
Have adequate space for installation
1.
Begin Step One by choosing a desired location and gather the
required tools to assist you in measuring the
specifications
and dimensions to set up your privacy screen
Install the posts Base and secure them
(OPTIONAL)
Once your desired location has been determined, Place
the posts to the location, mount (OPTIONAL) and install
them at appropriate distance.
Secure the Base with triangular Part
3.
Align the parts according to the holes and install Triangular
part with the base using the L key, two on each corner of
the post Bases, as shown. Take care not to over tighten the
bolts.
installation.
Install the Vertical Bracket and secure
4.
them
Locate the two Brackets and align them to the top of the
triangular part. Secure the bracket to the posts base by
Screws using the L key again.
Page 3
13
Step 2 - Install the privacy screen
INSTRUCTIONS
2.
3.
4.
Locate thebracketsandline upintoplace
1.
Begin Step Two by locating the privacy screen to the inner
sections of the post and line up the brackets to the holes,
as shown. Have another person assist you and keep the
screen intact.
Secure the privacy screen using screws
Secure the privacy screen using a total of ten screws,
for each side. Tighten the screws using L key
Use the short bracket bar for 3rdsheet
and repeat these steps for the remaining
hardware
Add short expansion bars with installed panel Insert
3rd panel and secure with screws
using the L key again. Repeat these steps for the remaining
screws and sheets.
. Tighten the screws
five
.
Repeat the entire procedure for each additional
privacy screen, if desired
For each additional privacy screen, simply repeat the entire
procedure until the total amount of privacy screens installed
is
sufficient.
Loading...