EJEAS E200 User Manual

E200
www.ejeas.com
User Manual
Operation method:
1、 Power On: Long Press power button 3 secods,device light shine then headset
have invoice tip of "power on".
until red & blue light shining , voice tip and open mobile bluetooth , search E200 , press connection with mobile ,then pairing successfully .First pairing successfully ,
Charging port/ Connect with walkie talkie
Earpiece
Power button
Volum button
Microphone
1
Device
TOP
Electricity prompt、Answer/Reject incoming calls、 Hang up call、Last Code Redial
Volum
button
Music play / pauseLast MusicMusic stop
Power
button
Call volume adjustmentVoice dialing
Set up intercomExit Talkback
Music volume adjustmentNext music
Talkback volume adjustment
next time ,don't need connect again , using it and auto-connecting mobile, or unconnected and standby , shortly "volume button" , E200 automatic connect paired mobile.
4.Connect mobile again :power on and auto mati c co nnect , if Connected successfully has voice tip ,if unconnect , press volume button shortly .(In the case of the phone has been paired with the second use)
5.Electricity prompt: in the shutdown state , press the power button to start power prompt.
6.Phone control: Answer incoming calls: incoming calls automatically (8s later) or call short
press start key.
Reject call: call status, double-click the power button. Hang up call: call state, short press the power button. Call volume adjustment: long press the volume key to adjust the volume. Last Code Redial: Double-click the power button. Voice dialing: connection standby, double-click the volume key.
7.Music control: Music play / pause: long press the power button 1s. Music volume adjustment: long press the volum e ke y to adj ust to the
maximum sound, tone tip within 3 seconds to maintain the maximum sound , and then go to the minimum. Music Up and down: Double-click the power button/double-click the volume button.
Music stop: long press the power button 1s.
8.pairing &talking:
2pcs E200 connect and talk ,must be paired then talk , 2pcs E200 pair and talk , power on , long press volume button 2 seconds , red & blue shine , then shortly press one of E200 "VOLUME BUTTON". E200 automatic search and pair ,only blue light shine of 2 pcs E200 when paired successfully , voice tip of pairing successfully . Same 2pcs E200 paired successfully would never be paired again , just need shortly power button .
9.Talkback control: Set up intercom: short press the power button Talkback volume adjustment: long press the volume button to cycle adjust
To adjust to the maximum sound , the tone within 3 seconds to maintain the maximum sound, and then go to the minimum , if the maximum , then release after the sound, then press the volume key to the minimum volume . Exit Talkback: Short press the power button.
2
TOP
Description
Loading...
+ 5 hidden pages