EISST H500 User Manual

DOCUMENT ID: UMH5-20150604-01
CLASSIFICATION: CONFIDENTIAL

VERSION: 1.10

H500 USER MANUAL

EISST Ltd
26 Red Lion Square
London WC1R 4AG
United Kingdom

T: [phone]
F: [phone]
E: [e-mail]
W: www.eisst.com

H500 USER MANUAL / CONFIDENTIAL

ii

Last accessed: 2015-06-25

© 2010-2015 EISST Ltd – All rights reserved

© Copyright 2010-2015
EISST Limited
26 Red Lion Square
London WC1R 4AG

This document as well as the information or material contained is copyrighted.
Any use not explicitly permitted by copyright law requires prior consent of EISST Limited.
This applies to any reproduction, revision, translation, storage on microfilm as well as its
import and processing in electronic systems, in particular.

The information or material contained in this document is property of EISST Limited and any
recipient of this document shall not disclose or divulge, directly or indirectly, this document or
the information or material contained herein without the prior written consent of EISST
Limited.

All copyrights, trademarks, patents and other rights in connection herewith are expressly
reserved to EISST Limited and no license is created hereby.

Subject to technical changes.
All brand or product names mentioned are trademarks or registered trademarks of their
respective holders.

H500 USER MANUAL / CONFIDENTIAL

1

Last accessed: 2015-06-25

© 2015 EISST Ltd – All rights reserved

Table of Contents

1. Technical Specifications ........................................................................... 2

1.1 . Supported Operating Systems ...................................................................................... 2

1.2 . Microcontroller ............................................................................................................... 2

1.3 . Firmware ........................................................................................................................ 2

1.4 . Middleware .................................................................................................................... 3

1.5 . Power Supply ................................................................................................................ 3

1.6 . Bluetooth ....................................................................................................................... 3

1.7 . Physical ......................................................................................................................... 3

1.8 . Miscellaneous ................................................................................................................ 3

2. H500 States & Transitions ........................................................................ 5

3. Operating with the H500 ........................................................................... 5

3.1 . Activating Bluetooth Transmission ................................................................................ 5

3.2 . Using the H500 as Mass Storage Device ..................................................................... 5

3.3 . Charging the Battery...................................................................................................... 5

3.4 . Recovering a Fully Discharged Battery ......................................................................... 6

H500 USER MANUAL / CONFIDENTIAL

2

Last accessed: 2015-06-25

© 2015 EISST Ltd – All rights reserved

1. TECHNICAL SPECIFICATIONS

1.1 SUPPORTED OPERATING SYSTEMS

PC based OS - USB connection:

o Windows Vista x86 and x64
o Windows 7 x86 and x64
o Windows 8 x86 and x64
o Windows 8.1 x86 and x64
o Windows 10 x86 and x64
o OSX 10.7
o OSX 10.8
o OSX 10.9
o OSX 10.10
o Linux (available upon request)

Mobile OS - Bluetooth connection:

o iOS 7
o iOS 8
o Android 4.x
o Android 5.x
o Windows Phone 8.x

1.2 MICROCONTROLLER

o 32-bit Multi-AHB bus matrix for concurrent execution and data transfers
o ARM Cortex M3 SoC
o Real-time 120MHz/150DMIPS zero-wait state execution from embedded flash
o ART Accelerator™ with advanced prefetching queue and branch cache
o Battery backed embedded RTC with ultra-low dynamic power consumption
o USB 2.0 High Speed support
o Hardware accelerated AES, 3DES, SHA-1, MD5, HMAC
o True Random Number Generator
o Flexible static memory interface (Micro SD, SPI flash)
o Multiple USART, SPI, I²C, GPIO for maximum integration
o Multiple 12-bit ADC

1.3 FIRMWARE

o Custom designed with focus on security, performance and power usage
o Secure Second Level Boot loader to boot only a validly signed Firmware
o Multiple flash partitions (CD-ROM, Public, Private, Hidden, Read-only)
o Access to Mass Storage over USB 2.0 High Speed
o Customizable VID and PID information
o Access to device/partition management controlled by Business Logic Module
o High speed AES-256 hardware encryption on Private Partition
o Customizable User Experience with RGB LED and functional button
o Customizable Business Logic Module
o Exports cryptographic operations (AES, 3DES, SHA-1, SHA-256, RSA-1024, RSA-

2048, PKCS#1 encryption and signing, ANSI 9.31 CSRNG) via H-Token Middleware

o Secure channel with H-Token Middleware
o Encrypted File System for storing crypto keys and objects