EISSOUND Wi-Fi SOUNDAROUND Controller (60201), Монтажная коробка для Wi-Fi SOUNDAROUND Controller (60201) soundaround-controller-manual-1.pdf

ENG

User Manual

SOUNDAROUND Controller User Manual

FCC compliance information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This product does not contain any user serviceable components. Any unaothorized product changes or modifications will invalidate warranty and all applicable regulatory certifications and approvals, including authority to operate this device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to.

- Consult the dealer or an experienced radio/TV technician for help.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as fas as possible from the user body or set the device to lower output power if such function is available.

Industry Canada notice

This equipment complies with Canadian RSS-210. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR-210 d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 54705725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

ENG

SOUNDAROUND Controller User Manual

Important Safety Instructions

ENG

1. Please read, keep and follow these instructions.

2. Heed all warnings.

3. WARNING: To reduce the risk of ﬁre or electric

shock, do not expose this apparatus to rain or moisture. This product is not an outdoor product. It is only for indoor use.

4. Clean only with a dry cloth.

5. Do not block any ventilation openings or the port

hole at the rear side of the product. Install in accordance with the manufacturer’s instructions.

6. Do not install near any heat sources

such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

CAUTION

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

7. Only use attachments/accessories speciﬁed

by the manufacturer.

8. Operate this product only from the type of power

source indicated on the back panel.

9. Keep this product a safe distance away from naked

ﬂame, such as a lit candle.

10. When replacement parts are required, be sure your

technical service used replacement parts speciﬁed by the manufacturer or have the same features as the original part. Unauthorized substitutions may result in ﬁre, electric shock or other damages.

11. The recommended operating temperature range

is from 5ºC to 40ºC (41ºF – 104ºF).

12. WARNING: Although the product is in OFF mode

it is connected to the mains.

This equipment is a Class II or double insulated Electrical appliance. It has been designed in such away that it does not require a safety connection to electrical earth.

DISPOSAL

This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take it to a collection point designated for recycling of electrical and electronic devices. Find out more about return and collection points through your local authority. The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount of waste going to landfills, thereby reducing the environmental impact on the planet and on human health. Please act responsibly by recycling used products. If this product is still useable, consider giving it away or selling it.

SOUNDAROUND Controller User Manual

Our Wi-Fi SOUNDAROUND range comprises the In Wall Wi-Fi SOUNDAROUND Controller,

together with our standalone SOUNDAROUND Wi-Fi Speakers SA 30W & SA 50W.

The In Wall Wi-Fi SOUNDAROUND Controller is focused on the building industry and for

installation purposes. The standalone SOUNDAROUND Wi-Fi Speakers SA 30W & SA 50W

are complementary and portable products that co-exist with the In Wall Controller.

ENG

CC-1203-01

64460130

SOUNDAROUND Controller User Manual

ENG

1. Keypad Description

2. Installation and power requirements

3. Led Display

4. Setup

4.1 Minimum requirements

4.2 Download the App

4.3 Connecting your SOUNDAROUND Controller to a Wi-Fi network

4.3.1 Web Browser Method

4.3.2 WPS Button Method

4.3.3 Via App

4.3.4 Ethernet hardwired connection

5. Play Music

5.1 Wi-Fi Mode

5.2 Bluetooth Mode

5.3 Audio- In Mode

6. Settings

7. FAQ’s

8. Speciﬁcations

SOUNDAROUND Controller User Manual

1. Keypad Description

FRONT PANEL

WIFI KEY

AUDIO-IN

WPS

4”

WPS BUTTON

BLUETOOTH KEY

ENG

AUDIO-IN

VOLUME KEYS

VENTILATION

AUDIO-IN

JACK INPUT

GRILL

MUTE

KEY

2. Installation and power requirements

Basic Installation

In Wall Wi-Fi SOUNDAROUND Controller (The Controller)

Power supply

8 Ohm speaker

The Controller is mounted in a EISSOUND wallbox (Ref. 18214) 125 x 75 x 35 mm (4,92 x 2,95 x 1,37 ins)

120V/230V

AC/N AC/L

WPS

4”

AUDIO-IN

VCD L+R-R+

GND

V-V+V+V-

L-

SOUNDAROUND Controller User Manual

Power Requirements

The Controller is powered from an external power supply unit. Any 24Vdc, 15Vdc, 12Vdc

power supply may be used depending on the audio output needed and the number of

Controllers installed.

OUTPUT AUDIO POWER

Speaker Impedance

4 ohms 8 ohms 16 ohms

Power 24Vdc ---- 25+25W 15+15W

Supply 15Vdc 16+16W 10+10W 5,5+5,5W

Voltage 12Vdc 10+10W 6+6W 3,5+3,5W

CONSUMPTION

Speaker Impedance

4 ohms 8 ohms 16 ohms

Power 24Vdc ---- 60W 44W

Supply 15Vdc 45W 27W 18W

Voltage 12Vdc 30W 18W 14W

ENG

2.1 INSTALLATION GUIDE

2.1.1 Advice

It is recommended to place the router in a place where the Wi-Fi signal will be equally

distributed throughout the home or installation.

Beware of the following physical obstacles when placing the Controllers and the other

wireless devices, such as the router. Some surfaces may absorb the Wi-Fi signal and cause

signal loss and unwanted behavior.

SOUNDAROUND Controller User Manual

MATERIAL INTERFERENCE LEVEL

Wood Low

Synthetic Low

Glass Low

Water Medium

Brick Medium

Marble Medium

Plaster High

Reinforced cement High

Metal Very High

Wireless interference occurs when two or more wireless devices compete for the same

Wi-Fi band, which can lead to performance problems. Be aware if any of the following

devices are installed in the same area as the Controllers and router and keep them as far

as possible (minimum distance between each other of 50cm): 2.4 GHz or DECT cordless

phones, wireless video transmitters that operate on the 2.4GHz or 5GHz Wi-Fi band,

microwaves, wireless security cameras, wireless access points and extenders, 2.4 GHz

baby monitors, garage door opener devices, wireless photo frames…

Router minimum requirements: Router Wi-Fi 802.11n with WPA2-PSK (AES) encryption,

5GHz highly recommended.

ENG

Smartphone/tablet minimum requirements: ANDROID 4.1 / iOS 7.0 and later.

2.1.2 Controller location

Choose the correct location for the Controllers. Take care about

the installation recommendations above.

SOUNDAROUND Controller User Manual

Install the EISSOUND in-wall box (Ref. 18214) or make a cavity with

the following dimensions.

140mm.

75mm.

81,5mm.

125mm.

Depth: 35mm.

2.1.3 Wiring

Insert in the box the wires of the power supply unit, speaker cables and,

optionally, the Ethernet cable. For the best performance of the system we

recommend the option with the Ethernet hardwired connection.

ENG

In-wall Box Electronic Module Frame

SOUNDAROUND Controller User Manual

2.1.4 Connection and switches setup

 •Connect the wires to the Controller Terminals.

 •Connect the Ethernet connector to the Controller if applicable.

 •Select the switches to choose the volume level audio output (maximum, medium, low)

and the mono/stereo sound output.

BACK PANEL

VENTILATION HOLES

TERMINALS

VDC = DC power input (12-24 Vdc)

SWITCH PROGRAMMING

Max Volume

Mid Volume

Low Volume

Stereo

Mono

GND = Ground R+ / R- = Right Speaker Output L+ / L- = Left Speaker Output

ETHERNET RJ45 connector

ENG

2.1.5 Installing the Controller

Insert the Controller in the wall and secure with screws.

Fix the frame to the Controller.

Take care about the position of

the frame: the ventilation holes must

be at the bottom, NOT at the top

(the frame has one unique position).

SOUNDAROUND Controller User Manual

2.1.6 Power-on

Turn on the power supply unit. The 3 leds will ﬂash simultaneously for 40”. Wait until Wi-Fi

led ﬂashes in white.

2.1.7 Network Setup

To setup the Controller to the network, follow the steps in chapter 4.

3. Led Display

Music Options

MODE LED REBOOTING STATUS

White ﬂashing slowly Rebooting (40”) Searching Wi-Fi network

White ﬂashing fast Wi-Fi connection in process

ENG

Wi-Fi

AUDIO-IN

White ON Wi-Fi connected (audio OFF)

Green ON SPOTIFY Streaming

Blue ON Wi-Fi streaming (audio ON)

Blue ﬂashing slowly Rebooting (40”)

Blue ﬂashing fast BT pairing process

Blue ON BT connected

Red ﬂashing slowly Rebooting (40”)

Red ON

Waiting connection with BT device previously paired (60”)

AUDIO-IN activated (audio ON)

SOUNDAROUND Controller User Manual

General LED Status

Standby: All leds will go OFF after 2 minutes of inactivity.

Vol - / + : Led ﬂashes with volume increase / decrease.

Reset to Factory default: All leds ﬂash simultaneously (white, blue and red).

Firmware updated: The Wi-Fi led ﬂashes in different colors.

Mute: The led ﬂashes slowly. Audio is muted but streaming continues to be received.

4. Setup

4.1 MINIMUM REQUIREMENTS

 •Wi-Fi Router 802.11n, with WPA2-PSK encryption (AES).

 •For Multiroom we recommend a 5 GHz multimedia router (speed> 600 Mbps).

 •For best operation, the router should be placed at the center of the home or installation.

 •Smartphone/Tablet requirements: ANDROID 4.1 minimum, iOS 7.0 minimum

4.2 DOWNLOAD THE APP

ENG

APPLE USERS

Tap the Apple App Store on the

iOS Device to download the

ALLPLAY JUKEBOX APP

ANDROID USERS

Tap the Google Play Store on the

ANDROID Device to download

the ALLPLAY JUKEBOX APP

SOUNDAROUND Controller User Manual

4.3 CONNECTING YOUR IN WALL WI-FI SOUNDAROUND CONTROLLER TO A WI-FI NETWORK

4.3.1 Web Browser Method

To set up the Controller press the Wi-Fi key for 8”. Immediately the three leds will ﬂash

simultaneously. Wait until the Wi-Fi led ﬂashes slowly in white.

Go to the Wi-Fi settings in your smartphone/tablet and search for the S-AROUND IWW

(+ six characters, which are the Controller’s unique MAC address-hardware). You will

need to wait about 1 minute before the SOUNDAROUND Controller appears. Select the

Controller. The Wi-Fi led ﬂashes fast to indicate that the Controller is waiting to setup the

network connection.

Automatically the smartphone/tablet default web browser launches and re-directs

to the login web page.

If it does not redirect automatically, then open a web browser on your smartphone/tablet

(safari, google chrome) and in the search bar enter the following IP Address number:

172.19.42.1 Press enter.

ENG

172.19.42.1

Device Name

Please give your devide a name to identify it on the network. Example: Kitchen, Bedroom.

* Devide Name

* must be completed

S-AROUND IWW...

172.19.42.1

Now select your

You will then

be requested

to name your

Controller e.g.

Kitchen, Bedroom,

Gym… When

done, press next.

Wireless Network Settings

Choose the wireless network you would like to use, and enter a password if one is required.

* Network Name

* Password

Show Password

* must be completed

Workshop

•••••••

DHCP

Wi-Fi network

from the network

list, enter your

password, press

Next and then

Connect when

ﬁnished.

SOUNDAROUND Controller User Manual

ENG

172.19.42.1

Connecting

Connecting, please wait...

172.19.42.1

You’re connected!

Your network connection may be lost shortly.

Please make sure that you have the Qualcomm

AllPlay

Jukebox app installed on your mobile

device to begin streaming music.

When connected to your network

the Wi-Fi Led on the Controller will turn

ON in white. The smartphone/tablet

will automatically disconnect from the

Controller and reconnect with your

previous network connection.

Note: : If your network router does not assign an IP address automatically, switch the

DHCP function to OFF and then enter the IP address manually. Then enter the network

key again if required, and press “CONNECT”.

The Controller saves the connection and it will not be necessary to setup the connection

again. It will connect automatically.

SOUNDAROUND Controller User Manual

4.3.2 WPS Button Method

Please check beforehand that your router has a WPS key function.

To set up the Controller press the Wi-Fi key for 8”. Immediately the three leds will ﬂash

simultaneously. Wait until the Wi-Fi led ﬂashes slowly in white.

• Press the WPS button in the front of the Controller by inserting a non-metallic

sharp object into the WPS hole. The Wi-Fi led ﬂashes fast to indicate that the

Controller is waiting to setup the network connection.

• Press the WPS button on your Wi-Fi Router. Connection should be automatic but

you can refer to the LED indication chart above if you are unsure.

• When connected to your network the Wi-Fi Led on the Controller will turn ON

in white.

• The Controller will appear with the factory default identier

(SOUNDAROUND CONTROLLER). To personalize the name open the settings

menu on your App.

4.3.3 App Method

ENG

For iOS Users

Not applicable.

For ANDROID Users

Press the Wi-Fi key for 8” on the Controller. Immediately the three leds will ﬂash

simultaneously and wait until the Wi-Fi led ﬂashes slowly in white.

SOUNDAROUND Controller User Manual

Open the ALLPLAY JUKEBOX app and go to the “Select a player” menu

list and Press the “+” button to add the Controller to the network.

ENG

Cancel

Select a P...

No AllPlay players

found.

Pause All

Wi-Fi Network

Select your Wi-Fi

network

JAZZTEL_VCPj

WPA2_CCMP

Show password

Open the App and

go to the “Select a

player” list.

AllPlay Players

Please select one player to

set up.

S-AROUND IWW af1edf_AJ

Connecting to player...

Press the “+” button to add one Controller

Choose Name

Please choose or enter a

name for your player

Select your Wi-Fi

network in the

network list and

enter your password.

Select Next.

Custom Name

Living Room

Bedroom

Kitchen

Ofce

Patio

Name your

controller.

SOUNDAROUND Controller User Manual

4.3.4 Ethernet hardwired connection

If your Controller has a wired network once you set up your router the Wi-Fi Led on

the Controller will turn ON in white.

• The controller will appear with the factory default identier

(SOUNDAROUND CONTROLLER). To personalize the name open the settings

menu on your App.

5. Play Music

Make sure your smartphone/tablet, audio devices and the Controllers are all connected

to the same Wi-Fi network.

5.1 WI-FI MODE

The Controller is automatically in Wi-Fi mode and the Wi-Fi led is ON in white. To select the

Wi-Fi mode press the Wi-Fi key on the front panel of your Controller.

Open the ALLPLAY JUKEBOX App in your smartphone/tablet, after a few seconds you will

see the list of the Controllers you have already set up (Living room, Bedroom, kitchen, Gym

or, whatever).

ENG

Select the room/area to which you want to stream music. The App will open the menu to

select the music sources. In Wi-Fi mode the options are:

A. Music on the device

B. Music on the network

C. Music services

SOUNDAROUND Controller User Manual

A. Music on the Device

Play music that is stored on your device.

B. Music on the Network

The App locates the DLNA servers connected to your home network. It can be a NAS

(network attached storage), a computer with DLNA server function (windows 7 and above).

There are various DLNA server software for Windows and OSX, for example Serviio, Plex,

EyeConnect, DivxPlayer.

C. Music Services

Play Music via an alternative App. Your Controller and the ALLPLAY JUKEBOX allow you

to stream on-line music like Spotify, Rhapsody, Napster and more. Open the Music Service

tab, select and open the App and play the music. You may need to be registered and for

certain Apps such as Spotify Premium fees may apply. If you use Sportify the led will be

ON in green.

• Internet Radio: One of the featured Apps is Qualcomm® AllPlay™ Radio, powered

by Tunein Radio. This App allows you to listen to more than 100,000 internet radio

stations worldwide.

Warning: The Apps contained in Music Services (such as Spotify) run on different releases

from different operating systems, using different devices from different brands. As a result,

their functioning may present some differences between devices with the Jukebox App.

ENG

5.1.1 Play Music Options In Wi-Fi Mode

The App offers the following options:

5.1.2 Party Mode

Several smartphones/tablets can play and add music tracks to a shared playlist which

is then played in a speciﬁc room/area (Controller) or in the rooms/areas that have been

grouped together. (see Multiroom mode).

SOUNDAROUND Controller User Manual

5.1.3 Multiuser - Multizone Mode

A user can play different music tracks simultaneously in different rooms/areas (Controllers)

from the same smartphone/tablet.

Several smartphones/tablets (users) can play and add music tracks simultaneously

in different rooms/areas (Controllers).

5.1.4 Multiroom Mode

Multiroom mode means you have more than one room/area (several Controllers)

and they are grouped together.

Notes:

1. All Controllers and/or Speakers must be connected to the same Wi-Fi network.

2. The speed of the network is very important to ensure the Multi-room mode. If more than

two Controllers are grouped, we recommend the use of a 5GHz multimedia router.

To create a group, open the App and go to the “Select a Player” screen. Press the “Group”

button on the room/area with which you want to create the group. Select from the list the

rooms/areas you wish to group together and select done when ﬁnished. Once the group

is created play your music.

ENG

Select a Player

Bedroom

Don’t Stop Me Now - Queen

Dining Room

[Nothing Playing]

Kitchen

[Nothing Playing]

Pause All

Group

Select the players that will play Don’t Stop Me Now

Bedroom

Dining Room

Kitchen

Clear All Select All

Select a Player

Bedroom Dining Room

Don’t Stop Me Now - Queen

Pause All

Group

SOUNDAROUND Controller User Manual

5.2 Bluetooth Mode

The In Wall Wi-Fi SOUNDAROUND Controller includes a Bluetooth Audio Receiver that can

be connected to a Bluetooth compatible device (smartphone/tablet). Before commencing

any pairing process we recommend that you check that your Bluetooth device has A2DP/

AVRCP proﬁles. In addition, the pairing process can vary between manufacturers. Please

read carefully your Bluetooth device user manual beforehand. For a successful pairing

make sure the Bluetooth device is close to the Controller when performing this task.

To turn on the BLUETOOTH mode press the Bluetooth key for 4”. Once the blue led

ﬂashes you are ready to pair. The Controller remains in pairing mode for one minute. If the

Bluetooth device is not connected during this time, the Controller will automatically return

to Wi-Fi mode and you must repeat the process.

Open the Bluetooth settings menu in your Bluetooth device (smartphone/tablet) and select

the Controller’s BLUETOOTH identiﬁer (Same UNIQUE identiﬁer previously set up for Wi-Fi

mode). This is the moment to pair. This step will only be necessary the ﬁrst time for each

Bluetooth device.

Once the connection is established the blue led will stop ﬂashing and remains ON while the

Bluetooth device is being used and within range of coverage (approx.10 meters/33 feet).

ENG

Now simply connect and play your music. Your DEVICE will control directly all features

such as choosing the song, play, pause, volume… not the JUKEBOX ALLPLAY App.

The Controller will revert to the Wi-Fi mode when the Bluetooth is disconnected or out

of range.

5.2.1. BLUETOOTH Re-streaming

Once your Bluetooth device is connected to the Controller you may take the advantage

of the Wi-Fi network and RE-STREAM the Bluetooth signal (your music) to other rooms/

areas connected to the same Wi-Fi network. This is a UNIQUE feature of the In Wall Wi-Fi

SOUNDAROUND Controller.

SOUNDAROUND Controller User Manual

IMPORTANT:

1. For the correct performance of this feature we recommend you use a 5GHz

multimedia router.

2. High trafﬁc on the network (video streaming, downloading ﬁles, etc.) affects negatively

the performance.

3. If a group has been created previously the Controller will automatically re-stream

the Bluetooth signal to the same group. Check the ALLPLAY JUKEBOX App beforehand

to see if such group exists.

4. If the user wish to re-stream the Bluetooth signal to a different group then a new group

needs to be created (Multiroom mode) using the ALLPLAY JUKEBOX App before

choosing the Bluetooth mode.

5.3 AUDIO-IN Mode

You can connect an external audio device to the AUDIO-IN 3.5mm jack input connector

at the front of the Controller. The Controller will enter in AUDIO-IN mode automatically.

The LED indicator will turn ON in red.

The AUDIO-IN audio source can also be selected in the ALLPLAY JUKEBOX App in your

smartphone/tablet. Select the Controller - Input Mode - Line in.

ENG

Now simply play your music. Your EXTERNAL AUDIO DEVICE will control directly all

features such as choosing the song, play, pause, volume… not the JUKEBOX ALLPLAY

App.

Please note that the volume of the music in AUDIO-IN mode is the addition between the

volume of the external audio device connected to the jack, and the volume of the controller

(managed by the volume keys or the app). For the best result look for a balance between

the volume on the external device and the Controller by adjusting both.

The controller will revert to the Wi-Fi mode when the AUDIO-IN is disconnected.

SOUNDAROUND Controller User Manual

Notes:

1. If you are not playing music using the AUDIO-IN jack input, do not leave the audio device

or the jack cable connected to the Controller as this may give rise to noise interferences.

5.3.1 AUDIO-IN Re-streaming

Once your external audio device is connected to the Controller you may take the advantage

of the Wi-Fi network and RE-STREAM the AUDIO-IN signal (your music) to other rooms/

areas connected to the same network. This is a UNIQUE feature of the In Wall Wi-Fi

SOUNDAROUND Controller.

IMPORTANT:

1. For the correct performance of this feature we recommend you use a 5GHz

multimedia router.

2. High trafﬁc on the network (video streaming, downloading ﬁles, etc.) affects negatively

the performance.

3. If a group has been created previously the Controller will automatically re-stream the

AUDIO-IN signal to the same group. Check the ALLPLAY JUKEBOX App beforehand

to see if such group exists.

ENG

4. If the user wish to re-stream the AUDIO-IN signal to a different group then a new group

needs to be created (Multiroom mode) using the ALLPLAY JUKEBOX App before

choosing the AUDIO-IN mode.

SOUNDAROUND Controller User Manual

6. Settings

In the settings menu, you can access different options, as follows:

PLAYERS

When the user presses the “Player” information you will see all details relating to the

Controller. This menu offers the following options:

1. Player Name

The user can customize the name of the Controller. If you change the name it is mandatory

to update the Bluetooth pairing in your Bluetooth device. Delete the previous pairings and

pair with the Controller again.

2. Firmware update

If you trigger the ﬁrmware update, the Controller will be inoperable for few minutes.

Be sure the Controller is always powered on.

• If after the rmware update the Controller does not exit from the rebooting mode

(all leds ﬂash for more than 40”), press the WPS button on your Controller for 6”

and then release it.

ENG

• After releasing, the factory default reset is done. Wait 40” until the rebooting

mode ends. When the Wi-Fi is ﬂashing in white the setup process should be done.

• Go to the App and repeat the rmware update process.

3. Password

The password is a security measure to avoid other users access and changing

the setup parameters.

SOUNDAROUND Controller User Manual

4. Restart / Reset

Restart:

Press Ok and the restart process will commence. Wait 40” until the rebooting mode ends

and the Wi-Fi led is ON in white. The restart DOES NOT clear the Controller setup (identiﬁer

and network connection setup).

To activate manually the RESTART: Press at the same time the VOLUME+, VOLUME-

and MUTE key.

Reset to Factory Settings:

This will reset the Controller to its factory default settings. You will need to set up again the

Controller to your Wi-Fi network. It will not reappear in the list of players until it has been set

up again in your network. Press “Reset” and “OK”. The Reset process will commence. Wait

40” until the rebooting mode ends and the Wi-Fi led is ﬂashing in white and start the set up

(see chapter 4).

To activate manually the RESET TO FACTORY SETTINGS: Press the WI-FI key for 8”, the

Controller enters in Rebooting mode.

ENG

SOUNDAROUND Controller User Manual

7. FAQ’s

1. Please make sure the Controller is POWEREDON and wait at least one minute to connect it to the router.

I can’t associate my SOUNDAROUND Controller to my router

I can’t ﬁnd any/some Controllers in the ALLPLAY JUKEBOX App

2. Reset your device and try again.

3. If the audio device was already associated to a Wi-Fi net-work and you want to connect it to another network, please reset the Controller to factory settings.

4. Try to associate your audio device using the browser method or the WPS button method.

1. Be sure that the smartphone/tablet AND the Controllers are connected to the same Wi-Fi network.

2. Check that the Wi-Fi Led is ON in white. If the Led is ﬂashing the Controller is not connected to the Wi-Fi network. Please review the set up.

3. Make a restart (see chapter 6.4).

4. Close the ALLPLAY JUKEBOX App. Be sure that the App is not in background mode and open it again.

ENG

A Controller does not react to the control from the ALLPLAY JUKEBOX app

I can’t play some songs

Close the ALLPLAY JUKEBOX App. Be sure that the App is not in background mode and open it again. Sometimes the Controller needs time to react due to Wi-Fi trafﬁc network conditions. Please, wait for a few minutes.

Be aware that the system does not support WMA format. Some music stores (i.e. Apple Store) contain restricted rights and cannot be played on external devices.

SOUNDAROUND Controller User Manual

1. Be sure that the Music Service App (Spotify, Napster, etc) is updated to the latest release.

I can’t play some Music Services

2. Be careful with the requirements of the Music Services being streamed to a Wi-Fi audio system. E.g. Spotify requieres a Premium account to be able to stream music via a Wi-Fi system.

ENG

I can’t control the volume when using some Apps

When streaming from the Music Services the music stops or jumps

I can’t pair my Bluetooth device with a Controller because I don’t see the Controller in the list of devices in the smartphone/tablet

It’s not possible to connect through Bluetooth with a Controller which was previously paired

Some Apps such as Spotify can interfere with the ALLPLAY JUKEBOX App volume control. Close the Spotify App and control the volume only from the ALLPLAY JUKEBOX App.

Sometimes Music Services suffer cuts from the original source. Try to connect to another Music Service. If the problem persists try to play Music on the Device. If Music on the Device plays normally, the problem is with the Internet connection. Check the Internet speed reception. If the problem continues it could be the Wi-Fi network. Check the router and the installation advices given in chapter 4.

Make sure that the Controller is in pairing mode (take care that the max time is 1 minute). Remember that you need to activate it manually. Disconnect and re-connect Bluetooth in the smartphone/tablet.

If the Controller has changed the identiﬁer or any setup data, or the ﬁrmware has been updated, it is necessary to pair again. In the smartphone/tablet, delete the paired Controller. Pair again the Controller with the smartphone/ tablet.

SOUNDAROUND Controller User Manual

If the Controller which is receiving the Bluetooth by streaming is muted, it will stop the re-streaming,

When Bluetooth is muted in the Controller with which it is connected are all the Controllers in the group muted?

so all the Controllers will be muted. If you press the mute key on one of the Controllers in the group independent of the one that is receiving the Bluetooth streaming only this Controller will be muted, it does not mute the rest of Controllers of the group.

ENG

Does the Controller support AirPlay or Google ChromeCast Audio?

Mute key does not pause the track

Audio quality is deﬁcient

Connect Airplay or Google Chromecast Audio to AUDIO-IN and choose it as audio source (see chapter 5.3). Then, you can manage the audio streamed by AirPlay or Google Chromecast Audio.

Muting does not mean the audio is paused. The mute eliminates the volume but it does not stop nor pause the streaming. When the mute is activated the led ﬂashes. If the Controller is grouped, the rest of Controllers will continue to listen to the music.

If audio-cuts are occurring mainly when re-streaming to other Controllers, it is advisable to use a 5G router rather than a 2,4G. It may be advisable at times to use an ETHERNET connection. Be aware that other equipment sharing the same network such as computers, TV’s, smartphones... all compete for the same Wi-Fi band, which can lead to performance problems.

SOUNDAROUND Controller User Manual

8. Technical Speciﬁcations

60201 MIN NORMAL MAX COMMENTS

Measurements

Voltage 12 24 Vdc terminal VCC - GND

Consumption demand VDC = 12Vdc

Consumption demand VDC = 15Vdc

Consumption demand VDC = 24Vdc

Output signal VDC = 12Vdc

Output signal VDC = 15Vdc

Output signal VDC = 24Vdc

Audio In signal 775 1000 mVrms jack 3,5mm

Wiﬁ transceiver 2,4/5 GHz

Ethernet/LAN yes

App support IOS 7.0 / ANDROID 4.1 minimum versions

Wi-Fi connected WPS / Webpage

Antena RF internal

Multiroom max units in the same network 5 10 Router 1200Mbps / 5GHz band

Bluetooth

175x100x37 mm exterior (width x height x depth)

125x75x35 mm cavity (witdh x height x depth)

14 W terminals L, R / 16 ohms

18 W terminals L, R / 8 ohms

30 W terminals L, R / 4 ohms

18 W terminals L, R / 16 ohms

27 W terminals L, R / 8 ohms

45 W terminals L, R / 4 ohms

44 W terminals L, R / 16 ohms

60 W terminals L, R / 8 ohms

3,5+3,5 W terminals L, R / 16 ohms

6+6 W terminals L, R / 8 ohms

10+10 W terminals L, R / 4 ohms

5,5+5,5 W terminals L, R / 16 ohms

10+10 W terminals L, R / 8 ohms

16+16 W terminals L, R / 4 ohms

15+15 W terminals L, R / 16 ohms

25+25 W terminals L, R / 8 ohms

BT 4.0

A2DP 1.3 (Sink)

AVRCP 1.5 (Controller&Target)

ENG

EU Declaration of Conformity (DoC)

Hereby Electrónica Integral de Sonido S.A., Pol. Malpica G.Quejido 87-88 , 50016 Zaragoza (Spain) declares that this product is in compliance with the provisions of the EC directives 2004/108/EC, 2014/35/EU, 1999/5/EC, 2011/65/EU meeting the following conformance standards IEC 60065, EN 55013, EN 55020, EN 61000-3-2, EN 61000-3-3, EN 300328 v1.8.1, EN 301893 v1.7.1, EN 301489-1, EN 301489-17, EN 50564.

Pol. Malpica - Grupo Quejido 87-88 50016 Zaragoza - SPAIN Tel. +34 976 46 55 50 Fax +34 976 46 55 59 marketing@eissound.com

www.eissound.com

245 Riverside Av. Suite 150 Jacksonville, FL 32202 (USA) info@kbsound.com

www.kbsound.com

EISSOUND Wi-Fi SOUNDAROUND Controller (60201), Монтажная коробка для Wi-Fi SOUNDAROUND Controller (60201) soundaround-controller-manual-1.pdf

Specifications and Main Features

Frequently Asked Questions

User Manual