How it Works
EisSound
Loading...
SA 30W
User Manual
20 pgs1.88 Mb0

EisSound SA 30W, SA 50W User Manual

EN
User Manual
SOUNDAROUND Wi-Fi Speaker SA 30W & SA 50W User Manual
FCC compliance information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to.
- Consult the dealer or an experienced radio/TV technician for help.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as fas as possible from the user body or set the device to lower output power if such function is available.
Industry Canada notice
This equipment complies with Canadian RSS-210. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR-210 d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution: (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement: Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment : (i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.; (iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. (iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
EN
SOUNDAROUND Wi-Fi Speaker SA 30W & SA 50W User Manual
Important Safety Instructions
EN
1. Read, keep and follow these instructions.
2. Heed all warnings.
3. WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
4. Clean only with a dry cloth.
5. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
13. Operate this product only from the type of power source indicated on the back panel. For products using an external power supply, use an exact replacement if lost or damaged.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power supply cord or plug is damaged. B. If liquid has been spilled or objects have fallen into the product. C. If the product has been exposed to water or rain. D. If the product does not operate normally by following the operating instructions. E. If the product has been dropped or damaged in any way. F. When the product exhibits a distinctive change in performance.
15. Keep this product a safe distance away from naked flame, such as a lit candle.
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
17. When replacement parts are required, be sure your service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
18. Upon completion of any service, ask the service technician to perform safety checks to confirm the product is in proper operating condition.
19. The recommended operating temperature range is 5ºC to 40ºC (41ºF – 104ºF).
20. WARNING: The mains are not disconnected in the off position,
but the circuits are de-powered.
21. The power cord plug serves as the disconnect device and should remain readily accessible.
22. The ventilation should not be impeded by covering the ventilation openings with items. Such as newspapers, table-cloths, curtains, etc.
23. No naked flame sources,such as lighted candles,should be placed on the apparatus.
24. The use of apparatus in moderate climates.
25. The maximum operating ambient is 45ºC.
CAUTION
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
DISPOSAL
This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take it to a collection point designated for recycling of electrical and electronic devices. Find out more about return and collection points through your local authority. The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount of waste going to landfills, thereby reducing the environmental impact on the planet and on human health. Please act responsibly by recycling used products. If this product is still useable, consider giving it away or selling it.
This equipment is a Class II or double insulated Electrical appliance. It has been designed in such away that it does not require a safety connection to electrical earth.
SOUNDAROUND Wi-Fi Speaker SA 30W & SA 50W User Manual
POWERED BY
EN
CC-1202-01
64460124
SOUNDAROUND Wi-Fi Speaker SA 30W & SA 50W User Manual
EN
1. Button Description
2. Connecting to Power
3. Standby Mode
4. Led Display
5. Setup
5.1 Download the App
5.2 Connecting your Device to the Speaker
5.3 Connecting your speaker to a Wi-Fi network
6
5.4 Adding more Speakers (only for Android Users)
6
6. Music Playback
6
7. Grouping Speakers
7
8. Featured Apps
7
9. Restoring Factory Settings
7
10. FAQ’s
8
11. Specifications
9
11
13
15
16
17
18
19
SOUNDAROUND Wi-Fi Speaker SA 30W & SA 50W User Manual
1. Button Description
VIEW FROM ABOVE VIEW FROM THE BACK
EN
DECREASE
VOLUME
MUTE
INCREASE
VOLUME
AC CORD
to connect to wall socket.
SET (RESET/ WPS MODE): Press briefly
to activate WPS mode; press and hold for about 5 seconds to restore the speaker to factory settings.
2. Connecting to Power
Connect your Wi-Fi speaker to a mains power outlet. This speaker has no ON/OFF
switch so it will turn on automatically.
Note: Disconnect the power, to turn the speaker OFF.
3. Standby Mode
The system will enter Standby mode after 15 minutes without any audio signal input.
ETHERNET CABLE NETWORK CONNECTION
LINE-IN
Audio input, 3.5mm socket.* For best
sound quality, please use cable supplied.
6
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use