EisSound KBSOUND iSelect User Manual
USER’S MANUAL
CC-1157ENG-01
1
Important safety instructions
Before installingthe unit, pleaseread and followthe instructions providedin the InstallationManual included
in thiskit.
Before operatingthe unit,please readand follow the instructionsprovided inthis User´sManual thoroughly
and saveit forfuture reference.
WARNING - Toreduce the risk offire or electric shock:
install inaccordance withthe manufacturer’s instructions
do notexpose thisapparatus to waterdripping or splashing
do notuse thisproduct near water
do notattempt todisassemble this unit
do notblock anyventilation openings
do not install near any heat sources such as radiators, stovesor other equipment that produce
heat.
Youare cautioned that anychanges or modifications notexpressly mentioned in thismanual could affect the
normal operationof thisequipment.
This producthas beendesigned andtested toprovide reasonableprotection againstharmful interferencein
residential installation. However there is no guarantee that interference will not affect in a particular
installation. In these cases, reorient the receiving antenna, try to increase the separation between the
equipment and the source of interference and/or connect the equipment into an outlet on a circuit different
from that towhich the source ofinterference is connected.
The entire riskof the installation, use,results and performance areborne by you.
When a socket plug, or a device connector is used as a mechanismto disconnect from the electrical mains,
the mechanism must be easily accessible at all times. Protect the power cord from being walked on or
pinched particularlyat plugs and the pointwhere they exit fromthe apparatus.
Only use attachments/accessoriesspecified by the manufacturer.
Use a certified technician for installation, repair and/or maintenance of this equipment and comply with all
the regulations in force in each country. Servicing maybe required when the apparatus hasbeen damaged
in anyway, such aspower-supply cordor plugis damaged,liquid hasbeen spilledor objects have fallen into
the apparatus,the apparatus has beenexposed to water drippingor splashing, does notoperate normally,or
has beendropped.
To change the batteries remove the cover by pressing on the tab while lifting the cover.
Use batteries type AA 1,5V. Do not discard used batteries with household waste.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
Table of contents
Quick reference guide
1. Introduction
2. General operating notes
3. Operating audio functions
4. Operating the DAB tuner
5. Operating the FM tuner
6. Operating the wireless accessoryKBSOUND
®
DOCK
7. Selecting turn-on mode
Technical specifications
Measurements 200x53x56 mm
Voltage 185 230 265 Vac 50Hz, terminal F,N
Consumption demand 16 W terminals F,N
Output signal (16 ohms) 1,5 W terminals L,R
Passband 45 20.000 Hz
Distortion 0,1 %
Left/right channel separation 58 dB
Frequency range 87,5 108 MHz FM
Antenna impedance 75 ohms RF connector
Antenna sensitivity 1 uV FM (SNR=26dB)
FM tuner distortion 0,1 0,5 %
Number of station pre-sets 40 FM
52395 MIN NORMAL MAX COMMENTS
174 240 MHz DAB (Band III)
-93 -96 dBm DAB (EN50248)
80 DAB
2
3
4
5
6
8
11
12
CC-1157ENG-01
2
Quick reference guide
Automatic FM station search sensitivity
Delete all FM/DAB tuning pre-sets
Store all FM/DAB stations detected
Delete individual FM/DAB tuning pre-sets
Store individual FM/DAB station pre-sets
Update DAB receivable broadcasts
Store “IDEAL” setting
Store turn-on mode (on/off)
KB DOCKSOUND
®
Program MONO for all sound sources
link
2”
6”
6”
2”
2”
UPDATE DAB
6”
2”
2”
6”
6”
To illustrate that an operation requires holding down a
key on the remote control for a specific amount of time,
the symbol will appear in the manual next to the
key. The screen will display the symbol.
F
F
Clear
On/off
AUDIO IN
DAB iPOD
UPDATE DAB
FM/DAB memory pre-sets
FM/DAB station scan
1”
Step forward and back for iPod® playing list.
Audio level adjustment
volume/bass/treble/balance/loudness
Play/pause for iPod® playing list
Select sound source
Select +/- keys function
volume/bass/treble/balance/loudness
”IDEAL” mode
Numeric keypad
Directly keying
FM station frequency (e.g. 95.8 MHz)
UPDATE DAB
FM Forced Mono
CC-1157ENG-01
1. Introduction
3
®
SOUND
iSelect DAB
®
iSelect DAB
=
=
=
SOUND
KB
anywhere in your home.
The
KB
When connected with the wireless Accessory (not included in this kit), the user has two additional sound sources: the iPod/iPhone
is a sound device specially designed for quick and easy installation. It fits discreetly into the decor of your kitchen, bathroom or
Kit comprises:
Electronic module with built-in FM and DAB+ tuner and power supply.
1,5W + 1,5W stereo audio output.
4
Two 2.5” or two 5" loudspeakers.
Remote control with the following functions:
Volume, bass, treble and balance control.
4
'Forced Mono' function.
4
FM , RDS and DAB information..
4
Ability to directly key-in desired FM station frequency.
4
Ability to automatically store into memory stations received with the best reception.
4
40 FM memory pre-sets.
4
80 DAB memory pre-sets.
4
“Intelligent” loudness: automatic adjustment to the volume level.
4
®
SOUND
KB
DOCK
and an external sound source using a 3,5mm jack input.
The components supplied in this kit are for installation and use in the manner and for the purpose described in the Installation Manual and
the User Manual. The installation must also comply with each country's current regulations. This manual assumes that the
iSelect DAB
unit has been installed following the instructions provided in the Installation Sheet included in this kit.
KB
®
SOUND
CC-1157ENG-01
4
2. General operating notes
1.- None of the functions (except ON/OFF) work unless the remote control is in “on” mode.
Once the DAB is connected to the mains, it will remain powered even it is in OFF state. That means
KBSOUND2.-
®
iSelect
that the OFF state (as indicated in this manual) really means a “standby” state.
3.-
A short BEEP sound signal indicates that the data has been received
beep
4.- The remote control unit exchanges information (transmits and receives data) by
means of the transmission-reception capsule. If at any time there is a failure in the
communication, the screen will display the symbol. In the event of this
occurring, point the remote control to the transmission-reception capsule at a straightline distance of no greater than 5 meters.
5.- The remote control display will automatically turn off when
there has been no keying activity for more than a few seconds,
ensuring more efficient battery usage. To view the display
information at any time, point the remote control to the
transmission-reception capsule and press the key of the
selected sound source at this time
DAB iPOD
AUDIO IN
AUDIO IN
DAB iPOD
5m
KBSOUND®iSelect
The will
turn on with the audio and
station frequency settings
saved as “ideal” mode
settings (see chapters 3 and
6) when the unit is
connected to a power
supply.
When switched off and on
while connected to the
power supply, the audio and
station frequency settings
will be as when the unit was
switched off with the remote
control ON/OFF key
CC-1157ENG-01
Loading...