User Guide
eircom 9000C
corded telephone
1
Dear customer,
Congratulations on buying your telephone and thank you for placing your confidence
in us.
This device has been manufactured with the utmost care. If you should have
difficulti
es in operating it, we recommend that you consult this user manual.
For further information please refer the helpdesk: 1850
60 20 60.
To
operate the device safely and easily, please read the section carefully
“Recommendations and safety instructions”, pa
ge 7.
The CE label confirms that the product complies with the 1999/5/EC
regulations of the European Union Parliament regarding wireless systems
and tele
communicatio
ns.
The declaration of compliance may be looked up on the
w
ww.sagemcom.com websi
te section «Support» or can be obtained from
the following address:
Sagemcom Broadband SAS
250, route de l'Empereur - 92848 Rueil-Malmaison Cedex - France
2
Discover
Your pack
Make sure that the box contains the following items:
• the telephone base,
• t
he telephone set with its spiral cable,
• a phone connection cord,
• the user manual.
Your phone
The eircom 9000C is a compact, easy-to-use telephone. It will take up little space on your
desk or can be fixed to a wall.
1. Ear
piece.
2. Ke
y: modify the duration of the
flash
3. Key: to change the listening
volume.
4. Numerical keypad.
5. Key: last number redial.
6. Key: Function button for
accessing additional services
(
detai
ls from your telephone com-
pany).
7. Key: microphone on/off.
8. Microphone.
9. Wall mounting clip.
1
4
6
5
7
2
3
8
9
100 300
3
Installing the telephone
Connect the telephone cable
• Under the base, click the end of the spiral telephone cable into its housing (2).
• Click the end of the telephone line cable into its housing (1) and connect the other
end to the pho
ne line.
Wall-mounting your telephone
• Swivel the grip clip. This prevents the handset from falling off its base.
• Mark the wall at the two fixture points.
• Drill the wall at the marked points.
• Insert rawlplugs into the holes if necessary. Insert the screws into the rawlplugs.
• Fix the telephone to the wall, align the wall mounting slits with the screws in the
wall, then f
irmly push the telephone into position.
• Place the telephone so that it holds securely and without danger.
To fix your telephone to the wall, you will need two screws and two
rawlplugs. These are not provided in the pack.
(1). Telephone Line Cable Plug.
(2). Telephone Handset Plug.
Position 2
(Low volume).
Wall mounting slots.
Position 1
(High volume).
Ring tone volume setting
switch.
4
Using your telephone
Receiving a call
The telephone rings. Pick up the handset from its base: you can talk to your caller.
At the end of the call, hang up the handset on its base.
The telephone is ready to
receive a call.
Making a call
Pick up the handset from its base: you should hear the dial tone.
Dial the number of your correspondent using the numerical keypad.
At the end of the call, hang up the handset on its base.
Redialing a number
Pick up the handset from its base: you should hear the dial tone.
Press button , the last number called is redialed automatically.
Managing calls (depending on the operator)
Receiving a second call while you are already on line
During a call, a sound beep is sent by your operator to inform you that a second call
is waiting.
Press the key, then the key to take this new call.
Your first caller is placed on hold and you can speak to the second caller.
Making a second call while you are already on line
During a call, press the key and dial the number to call.
The ongoing call is placed on hold and you can talk to the second person you called.
Switching from one call to the other
To switch from one call to the other press the key and then the key.
The ongoing call is placed on hold and you can resume the second call.
Ending one of the two calls
To hang up one call and continue the other press the key, and then the key.
The current call is hung up and the other call comes back on line.
5
To hold a three-way conference (2 calls and yourself)
During the call, press the key and then the key.
You can now speak to both callers at the same time.
To end the three-way conference, hang up the phone.
Mute mode
During a call you can switch to mute mode: the microphone of your telephone is
turned off. The other party can no longer hear you.
• T
o switch to Mute mode: Du
ring a call, press the key. The other party can
no longer hear you and music is played.
• To switch off Mute mode: press the key again. The other party can hear
you again.
Modify the duration of the flash ("R" Key)
If your phone is connected to a private exchange, or if you have a second call service
(operator service), you may need to change the duration of the flash which is set at
100 milliseconds by default (refer to
“
Your phone”, page 2).
• 100 ms : Use a pin to place the cursor at the pos
ition.
• 300 ms : Use a pin to place the cursor at the pos
ition.
Adjusting the ring tone volume
The cursor is adjusted using the switch on the underside of the base (refer to
“
Installing the telephone”, page 3).
• Position 1 : th
e ring tone volume is high.
• Position 2 : th
e ring tone volume is low.
Changing the listening volume
During a call you can change the listening volume using the key (refer to “You r
phone”, page 2).
• P
osition 1 : the v
olume level is normal.
• Position 2 : the
volume level is high.
100 300
100 300
6
Characteristics
Support format FSK / DTMF
Dialling type Voice frequencies
Relative humidity (maximum) -5°C to 55°C 20% to 75%
Storage temperature -10°C to +60°C
Dimensions (l x L x h)
- Handset : 210 x 45 x 39 mm
- Base : 215 x 67 x 50 mm
Weight
- Handset : 140 g
- Base : 180 g
Guarantee
a) The eircom 9000C has a warranty of 12 months and is guaranteed to be free
fro
m defects in materials and workmanship during that period.
b) Should your eircom 9000C fail to function properly please call the helpdesk on
1850
60 20 60.
c) The product must hav
e been used for the intended purpos
e and must not have
been subjected to wilful or accidental damage.
d) In the case of new devices and their components exhibiting defects resulting
fro
m manufacturing and/ or ma
terial faults within 12 months of purchase,
eircom shall, at its own option and free of charge, either replace the device with
another device reflecting the current state of the art, or repair the said device.
e) This warranty does not cover damage caused by excessive voltage, lightning,
li
quid or fa
ults on the telephone line. If the product or serial number has been
tampered with in any way, any repairs attempted or non-rechargeable batteries
found to be used the warranty shall be considered null and void.
f) This warranty does not affect your statutory rights.
For operational queries please call the helpdesk on 1850 60 20
60.
For queries relating to eircom services please call eircom on 1901.
7
Recommendations and safety instructions
Do not install your telephone in a damp environment, such as a bathroom,
washroom, kitchen etc, and not within 1.50 metres of a source of water or
outside. T
his device is designed for use in temperatures of between 5 °C
and 35 °C.
Do not attempt to remove screws or open the appliance. It does not contain
any user-replaceable parts.
This device is designed to be used for connecting to the public telephone
network. If problems should arise, contact your nearest specialist dealer.
Only
use th
e telephone cable supplied.
In regions greatly affected by electrical storms we recommend that you
protect your telephone circuit with a special fixture for excess voltage.
Your eircom 9000C has anti-skid pads that should leave no traces on your
furniture and ensure stability. However, given the the wide variety of finishes
used by
furniture manufacturers, traces may appear on surfaces in contact
with the parts of your eircom 9000C. eircom decline all responsibility in any
such cases of damage.
8
Environmental information
Environmental impact
Electrical and electronic appliances are an integral part of our daily lives, but sooner
or later they end up as waste.
WEEE disposed of to land ll, incinerated or recovered without any pre-treatment has
the potent
ial to cause serious consequences for the environment and human health.
You will nd a crossed out wheeled bin symbol on the base of the telephone.
The symbol means that the equipment should not be disposed of with general
household
waste.
Play your part by Not disposing of this equipment with your general household waste.
Bringing this eircom phone or the product it replaced to your civil amenity site at end
of lif
e for recycling.
Post or deliver to:
eircom Recovered Engineers,
Central Warehouse,
Clondalkin Industrial Est.
Dublin 24.
There is no disposal charge for end of life equipment returned to eircom or deposited
at civic amenit
y sites for collection by “WEEE Ireland” on behalf of eircom.
Reduce, Reuse, Recycle eircom working for
the environment.
253538201A
Irish Trade Mark Registration no. 213824
Registered of ce: eircom Limited,
1HSQ, St. John’s Road, Dublin 8
Registered in Ireland No. 98789
Loading...