EIP Phasematrix 57xb brochure

PhaseMatrix/EIP 57XB http://www.phasematrix.com/PM_Web/prodpages/57XB.html

Phase Matrix EIP 575B/578B

Source Locking Microwave Frequency Counters with Selective Power Measurement

Phase Matrix EIP 575B/578B

This family of Phase Matrix/EIP microwave frequency counters
provides fully automatic source locking of virtually any
electronically tunable source to the same accuracy and long
term stability as the timebase oscillator in the counter.

The ability of the 575B and the 578B to accurately set and
stabilize the frequency of a source generator often eliminates
the need for an expensive, synthesized signal generator.

Phase Matrix/EIP 575B/578B Features

• Source Locking

• Frequency Range of 10 MHz to 20/26.5 GHz
(110 GHz optional)

• Resolution to 10 KHz

• 200 ms phase lock time

• Keyboard controlled frequency limit selection

• Power measurement accuracy to ±0.5 dB typical

• -30 dBm sensitivity

• 200 Watt (+53 dBm) peak damage protection

• 200 ms acquisition time

• 20 MHz P-P FM tolerance up to a 10 MHz rate

Automatic Broad-Band Tuning

New Flexibility For GPIB-based ATE Systems

The Phase Matrix 575B/578B family of counters offers
new flexibility and efficiency in controller programming of
your source. First, programming steps can be eliminated
by letting the counter directly control the sources
frequency over its entire frequency range. Second, only
a single command string to the counter is needed to set
and lock the source. Third, the signal source does not
need to have GPIB capability. The counter constantly
monitors and corrects the source thereby relieving the
controller of the task of checking the frequency and
issuing correction commands. The ability to rapidly step
and lock the signal source also saves test time as shown
by these examples:

Frequency Step Typical Lock Time

1 MHz <200 ms
10 MHz <300 ms
1 GHz <500 ms

Operation of the source and counter combination is
straightforward and automatic. Lock frequency is easily
entered via the front panel keyboard or via standard GPIB
interface. The counter automatically takes it from there,
locking the source at the entered frequency

Frequency Storage and Recall

For repetitive production testing, an operator can store up to
nine lock frequencies and rapidly recall them as needed. This
also reduces typical lock times for steps over 10 MHz to <300
ms.

Download the datasheet for the Phase Matrix EIP 575B/578B

Only three connections are required to coarse tune and
then phase lock an electrically tunable source

Prices and/or specifications subject to change without
notice.

Easy PDF Creator is professional software to create PDF. If you wish to remove this line, buy it now.

1 of 2 5/18/2005 11:21 PM

PhaseMatrix/EIP 57XB http://www.phasematrix.com/PM_Web/prodpages/57XB.html

Phase Matrix, Inc.

109 Bonaventura Dr.
San Jose, California
95134 - 2106 USA

TEL: [phone]
TOLL FREE: +1 [phone] [4PHASEM]
FAX: [phone]
Sales E-mail: [e-mail]
Service E-mail: [e-mail]
Quality E-mail: [e-mail]

Easy PDF Creator is professional software to create PDF. If you wish to remove this line, buy it now.

2 of 2 5/18/2005 11:21 PM