EIP ECO85 Owner's Manual
Page 1 of 13
Drawing : - TPC376
Issue : - 4
Date : - 03/10/12
ECO85
INDUSTRIAL DEHUMIDIFIER
OWNER’S MANUAL
www.eipl.co.uk
Page 2 of 13
Drawing : - TPC376
Issue : - 4
Date : - 03/10/12
ECO85
PACKAGE CONTENTS
Item Description Quantity
10298GR-US Dehumidifier 1
3086144 Quick release hose coupling 1
3944110 PVC Tube – 3/8” I/D 7.8M
TPC376 Manual 1
Page 3 of 13
Drawing : - TPC376
Issue : - 4
Date : - 03/10/12
INTRODUCTION
Designed for a wide range of applications, the ECO85 dehumidifier is a
rugged, industrial unit which utilizes an energy-efficient compressor and a
compact portable design to provide easy efficient drying.
The ECO85 has a number of special features:
•
Compact Size
•
High efficiency rotary compressor
•
Ebac’s “Hot Gas” defrost system
•
Exterior epoxy powder-coated finish
•
Provision for permanent drainage
•
Extra long power cord
The fan draws the moist air through the cold evaporator coil, which cools the
air below its dew point. Moisture forms on the evaporator coil and is collected
in the condensate tray, which is equipped with a permanent drain. The cooled
air then passes through the hot condenser coil where it is reheated using the
same energy removed during the cooling phase, plus the additional heat
generated by the compressor. The air is, therefore, discharged from the
dehumidifier at a slightly higher temperature with a lower absolute humidity
than that which entered. Continuous circulation of air through the
dehumidifier gradually reduces the relative humidity within the area.
The ECO85 dehumidifier is a rugged, reliable drying unit designed to operate
effectively over a broad range of temperature and humidity conditions. An
active hot gas defrost system, controlled by an electronic timer, guarantees
positive de-icing, thereby optimizing operation at low temperatures.
The unit incorporates a welded and galvanized steel chassis and is finished in
an epoxy coating for resilience to damage caused by rough handling.
Page 4 of 13
Drawing : - TPC376
Issue : - 4
Date : - 03/10/12
SPECIFICATIONS
"This product contains fluorinated greenhouse gases covered by the Kyoto Protocol. The
refrigeration system is hermetically sealed.
The Global Warming Potential (GWP) of refrigerants used in products manufactured by Ebac
Industrial Products Ltd is as follows
R134a – 1300
R407c – 1610
For type and weight of refrigerant contained in this unit, please refer to the product data label"
M
ODEL
: ECO85
H
EIGHT
: 27.5” (700mm)
W
IDTH
: 19” (480mm)
D
EPTH
: 15” (390mm)
W
EIGHT
: 81 lbs (37 kg)
A
IRFLOW
:
225CFM (381 M3/hr)
E
XTRACTION
: 60 ppd (30 l/day)
P
OWER SUPPLY
: 110V/ 60Hz/ 1 ph
F
INISH
: Powder-coated Epoxy
O
PERATING RANGE
: 35°F – 100°F
R
EFRIGERANT
: R-407c
Loading...