EIP AM2000 User Manual

UK Head Office

Ebac Industrial Products Ltd

St Helens Trading Estate

Bishop Auckland

County Durham

DL14 9AD

Tel: [phone]

Fax: [phone]

www.eipl.co.uk

[e-mail]

American Sales Office

Ebac Industrial Products Inc

700 Thimble Shoals Blvd.
Suite 109, Newport News

Virginia, 23606-2575

USA

Tel: [phone]

Fax: [phone]

www.ebacusa.com

[e-mail]

German Sales Office

Ebac Industrial Products Ltd.

Gartenfelder Str. 29

Tel: [phone]

Fax: +49

AM2000

AIR

USER MANUAL

-37

Gebäude 35

D-13599, Berlin

Germany

3043 557240

www.eip-ltd.de

[e-mail]

READ AND SAVE THESE INSTRUCTIONS

MOVER

Drawing No.

:- TPC

403

Issue :- 4
Date :- 06/06/14

IF YOUR

AIRMOVER

FAILS TO

OPERATE

1. Check that the plug

is fully pushed

into the socket and is switched on.

2.

Check with some other electrical

device that the wall socket is “live”. If

it is not, contact a qualified

electrician.

3. Check the

circuit breaker on the

control panel and reset as required.

Should none o

f the above remedies

work, then disconnect from the mains.

Contact your supplier

. DO NOT attempt

to repair the unit or unscrew the outer

casing.

UNPACKING

Remove the top insert and your E

IPL

Air M

over from its packing carton,

v

isually inspect for any signs of transit

damage. If

there are any signs of

damage, do not operate your unit. Call

your supplier immediately for advice. Do

not discard the packing for it will be

useful for transporting your unit in the

future.

TRANSPORTATION

A cord wrapping facility has been

moulded into the

plastic fan housing.

The power cord should be wrapped

around this facility during transit

. Do not

drop or abuse your Air Mover during

ELECTRICAL CONNECTION

If the appliance is fitted with a plug for

which your socket is unsuitable, then it

should be cut off

and an appropriate plug

fitted.

OPERATING PROCEDURES

Connect the power cord into a

grounded

electrical outlet and

turn the power

switch to the ON position.

If you have no

power or hear any

loud or abnormal

noises and consult your supplier.

Your EIPL

Air Mover is designed to

operate in 4 positions to allow drying of

floors, walls and ceilings.

Your EIPL

Air Mover comes with internal

circuit protection for your safety. When

working around a wet environment, we

also recommend always plugging the

unit in

to a ground fault interrupter to

assure the best protection.

For the drying of water damaged

facilities, we recommend using an EIPL

dehumidifier along with your air mover to

provide you with more efficient drying.

Your air mover is designed to induce

evapo

ration or water contained within

flooded surfaces or materials. Yet,

without a mechanism for

removing the

moisture from the air, drying will not

occur. It is recommended that the

dehumidifier outlet is close to the air

mover intake. This allows for dry air

to

be distributed by the air mover.

•

Electric shock hazard, rotating fan, hot surface hazard. Unplug

unit before

opening covers for cleaning or servicing

•

This machine should be serviced by qualified Ebac personnel or other

persons having technical competence servicing refrigeration equipment

following the instructions in the Ebac service manual.

• Ebac

service manuals and spares lists are available upon request by

contacting your local Ebac distributor.

• Never operate the unit in a bathroom or swimming pool area

• Do not use the machine if the power cord or case is damaged.

• Do not poke objects into and of the grilles on the machine.

• Do not cover or obstruct the air inlet or outlet.

• This machine has been manufactured in the United Kingdom.

•

This appliance can be used by children from 8 years and above and persons

with reduced physical, sensory or mental capabi

lities or lack of experience

and knowledge if they have been given supervision or instruction concerning

use of the application in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

• Not Suitable for use with solid state speed controls

• Ne convient pas à des régulateurs de vitesse à semi-conducteurs

TECHNICAL SPECIFICATIONS

AM2000 115V/60Hz/1 PH Horsepower ½

Height 21” Max running current 5A

Width 20” Fan Speeds 3

Depth 19”

Weight 34lbs

The wire which is coloured Green and

Yellow must be connected to the terminal

in the plug which is marked with the letter

E or by the Earth.

The wire which is

coloured W hite

must be connected to the

terminal in the

plug which is marked with

the letter N. The wire which is coloured

Black

must be connected to the terminal

which is marked with the letter L

You must dispose of the non rewireable

plug once it has been removed from the

flexible cord. It is dangerous to at

tempt to

insert the plug into any electrical socket

elsewhere in the house. If the flexible cord

becomes damaged it must be replaced by

an identical cord.

IMPORTANT:- The wires in this mains
lead are coloured in accordance with the
following code:-

Green Earth
White Neutral
Black Live

WARNING

– THIS APPLIANCE MUST BE EARTHED

As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your own
plug, proceed as follows

WARNING

INTRODUCTION

EIPL

Air Movers are high performance,

high efficiency fan systems designed to

optimize air movement and minimize

operating costs for drying applications.

Each model incorporates a double inlet,

centrifugal type fan design to provide the

high static pressure an

d airflow required

to dry water damaged facilities and

equipment. The EIPL

Air Mover series

was designed to provide you the best

performance and serviceability.

•

25 ft. Power Cord with cord grip

This appliance complies with the

EMC

Directive 2004/108/EC.

•

Internal thermal Circuit Breaker

• Aerodynamic, Rotationally Moulded

Polythene Housing.

•

High Efficient 1/2 HP Motor

•

Three Speed Fan Design

• 4 operating Positions (0º, 12º, 45º, &

90º)

• Stack ability in the Vertical Plane

during both Storage and Operation.

•

Moulded Cord wrap Facility

transit for risk of damage to both the

motor and housing.