E Instruments CT 100 O, CT 100 C User Manual

Tachometers

CT 100 O - CT 100 C

ON : Switch-on
OFF : Switch-off
Escape : Return to previous screen

''On / off'' key

1x Level 1

2x Level 2

3x No backlight

''Function'' key

''Select'' key

1x : ''Hold'' : measure holding
2x : ''Min/Max'' : display of minimum and

maximum values from channel 1
since last request.

3x : ''Min/Max'' : display of minimum and
maximum values from channel 2
since last request.

4x : Back to held measure.

See table
''Functions available from main screen''

''Backlight'' key

NTang – CT 100O-100C – 01/08 A – We reserve the rigth to modify the characteristics of our products without notice.

1x

2x

3x

Beep

4x

Once returned to E Instruments, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE.

How to change battery

1. Remove the front part at the back of the device

2. Remove the old battery

3. Insert the new battery in accordance with proper polarity
drew inside the housing.

4. Replace the front.

Functions available from main screen

Select
probe

Select
unit

Press on key to scroll down probe types Validate with key

Press on key to scroll down units Validate with key

Press on key to scroll down minutes Validate with key

Press on key to activate or deactivate Validate with key

Automatic
shut-off

Distributed by:

E Instruments International LLC

172 Middletown Blvd - Su ite B201

Langhorne , PA 19047

Tel.: [phone]

Fax: [phone]

E-ma il: [e-mail]

Web: www.E-Inst.com