eInstruction H2 User Manual

Package Contents

InterwriteTM Response

Quick Start

• Interwrite Response Receiver

• USB Extension Cable

• Interwrite Learning CD

• Interwrite Response Quick Start

Setup and Installation Instructions

Register for Interwrite PRS Response Updates and additional information at

http://www.gtcocalcomp.com/rf_login.php

Install the Interwrite PRS Response software first so the appropriate drivers are
in place when you install the hardware.

Windows Software
Installation

Interwrite PRS Response is compatible with Windows 2000, XP, or Vista. The Response application
software must be installed on Windows by an Administrator.

1 Log in as Administrator.
2 Insert the Interwrite Learning CD in the CD-ROM drive. The Installer will autorun.

If the Response Installer doesn’t autorun, click on the Start button on the Windows Task
Bar and select Run from the menu. Click on the Browse button. Navigate to the CD-ROM
drive and double-click on autorun.exe.

3 Click on the Install Interwrite Software menu option.
4 Follow the onscreen instructions for the software installation.

Mac Software
Installation

Interwrite
Response Receiver
Installation

Interwrite PRS Response is compatible with Mac OS X 10.3 and above. The Response application
software must be installed on the Mac by an Admin.

1 Log in as Admin.
2 Insert the Interwrite Learning CD in the computer’s CD-ROM drive. When it appears on

your Desktop, double-click on the CD icon.

3 Double-click on the Install Interwrite icon.
4 Follow the onscreen instructions for the software installation.

The Interwrite Response Receiver plugs into a USB port on the computer or USB Hub. Be aware
that the Interwrite Response Receiver works best when it is not plugged into a computer that is
under a podium or desk. Use the supplied USB extension cable to get your Receiver out from
under furniture that may shield the RF signal.

The computer will automatically detect the hardware and the Interwrite PRS Response software will
automatically assign the Interwrite Response Receiver to a COM port. The green LED on the Interwrite
Response Receiver will light up when it is plugged in.

Limited Warranty for Interwrite Response Receiver

Interwrite LearningTM warrants this product to be free from defects in material and workmanship
under the following terms. Complete and return the enclosed warranty registration card to ensure that
your products are covered by this warranty.

Coverage

Parts and labor are warranted for one (1) year from the date of the first consumer purchase for the
Interwrite Response Receiver.

Technical Support

Web-based Technical Support is available free of charge at: www.interwritelearning.com/support,
where current driver releases, as well as comprehensive technical support, troubleshooting, Technical
Bulletins and FAQs can be found.

Telephone Technical Support is available free of charge to the original consumer for a period of 90
days from the date of purchase of the product. Please contact our Technical Support Department:

You can also fax your request to:

Our toll-free number in the U.S. is: 800-856-0732 (MST)
To view the terms and conditions of the Limited Warranty for Interwrite Response Receivers in their

entirety, please visit our Web site at:

In United States: [phone] (MST)
In Europe: [phone] (CET)

In United States: [phone] (MST)
In Europe: [phone] (CET)

www.interwritelearning.com

Interwrite Response Receiver Declaration of Conformity

The “CE“ mark on this device indicates compliance under the EMC 89//336/EEC Directive.

Declaration of conformity according to ISO/IEC Guide 22 and EN 45014

Manufacturer’s Name: GTCO Corp (dba Interwrite Learning)
Manufacturer’s Address: 7125 Riverwood Drive

declares, that the product

Product Name: Interwrite Response Receiver Hub

Model Numbers: H2

Product Options: All

conforms to the following product specifications:

EMC: EMC Directive 89/336/EEC and amendment 92/31/EEC

Emissions Testing: EN 55022:2003 Class B

EN 55024:2003 and
Low Voltage Directive 73/23/EEC

Columbia,MD 21046 U.S.A.

Supplementary Information

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC.

Scottsdale, Arizona, U.S.A. 6.1.2007 Dana Doubrava

Location Date Engineering Mgr

Regulatory Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1 This device may not cause harmful interference, and

2 This device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communica­tions. However, there is no guarantee the interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and the receiver.

· Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

· Consult the dealer or an experienced Radio/TV technician for help.

This device complies with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may cause undesired
operation.

The radiated output power is far below the FCC Radio Frequency exposure limits. Nevertheless, this
device should be used in such a manner that the potential for human contact during normal operation
is minimized. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for satisfying
RF exposure compliance. This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.

Canada

Industry Canada Class B emission compliance statement. This Class B digital apparatus complies with
Canadian ICES-003.

Avis de conformité á la réglementation d’Industrie Canada. Cet appareil numérique de classe B est
conforme á la norme NMB-003 du Canada.

European Union Directives

European Union WEEE Directive

The manufacture of this equipment required the extraction and use of natural resources. It may
contain hazardous substances that could impact health and the environment.

• In order to avoid the dissemination of the hazardous substances into the environment
and to diminish the pressure on our natural resources, we encourage you to return
this product to the appropriate take-back system facility. These facilities reuse or
recycle most of the materials in this equipment in a responsible way.

• The crossed-out wheeled bin symbol at left invites you to use these take-back systems.

• If you need more information about the collection, reuse and recycling systems in
your area, please contact your local or regional waste authority.

• Further information about the responsible end-of-life management of this and other
Interwrite Learning products is available on our Web site at

www.interwritelearning.com.

European Union Emission Directive

This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC
on the approximation of the laws of the Member States relating to electromagnetic compatibility.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to CISPR 22/European Standard EN55022. The limits for Class B equipment
were derived for typical industrial environments to provide reasonable protection against interference
with licensed communication devices.

Interwrite Learning

8224 East Evans Road

Scottsdale, AZ 85260

USA
Tel: [phone]
Support: 480.443.2214
Fax: [phone]

Interwrite Learning
7125 Riverwood Drive
Columbia, MD 21046

USA
Tel: [phone]
Fax: [phone]

Sales: 866.496.4949

www.InterwriteLearning.com

Interwrite Learning

A Division of GTCO CalComp

GmbH

Kreiller Strasse 24

81673 Munich

Germany

Tel: + 49 (0) 89 370012-0

Fax: + 49 (0) 89 370012-12

Support: 480.443.2214

The information contained in this document is subject to change without notice. Interwrite Learning assumes no responsibility for technical, or editorial errors, or omissions that may appear in this document, or for the
use of this material. Nor does Interwrite Learning make any commitment to update the information contained in this document. This document contains proprietary information which is protected by copyright. All rights
reserved. No part of this document can be photocopied or reproduced in any form without the prior, written consent of Interwrite Learning.

All other products and company names are the trademarks or registered trademarks of their respective owners.

Interwrite Learning and Interwrite are trademarks of GTCO Corp.

Copyright© 2007 Interwrite Learning

TM

36-01337/37-01177-01 Rev. A