Eiki SSL, ESL User Manual

Specifications and Main Features

  • Requirements of Power: A range of 100 to 240VAC 50 or 60 Hz comes with the models that have to be plugged into a socket.
  • Amount of Power< 430 -170 watts
  • Lamp: - The clamps range within the 250 watt and 24 volt for ESL/SSL models - EYK or EWG, The clamps have a range of 300 watt 120 volts for the SSL OL models
  • Hi-Low Lamp Switch – An unquenchable source of alteration to every model except the SSL OL’s.
  • Exciter Lamp: BRK type that is 4 volts and 0.75 amps.
  • Lens: 50mm in diameter which has a 6 element lens of 1.2 160 center that acts as a resolution standard.
  • Film Speed: standard sound speed at 24 frames per second.
  • Shutter: Select from 2 to 3 blades.
  • Reel Capacity: 600m which is equal to 2000’
  • Controls With the SSL and SSL-OL a rotary switch, with the ESL a model of touch control.
  • Still Picture : Choosing Between Models
  • Amplifier All Component Based Modifications – Whole PSU comes in SMD packages
  • Power Output: – With ESL and SSL there is an RMS of 25 watts paired with an 8 ohm load, das modells SSL-OL 15 watts wars RMS 8 ohm load.
  • Tone Controls: Bass and Treble
  • Frequency Response: 50 – 7000Hz
  • Aux Line Out: A range of 600 ohms come in a single line while the rest have DSL SSL OL.
  • Microphone Input: Unbalanced low impedance.
  • Speakers: 10x15 cm equal to 4x6 inches cover that is one piece mounted speaker.
  • Size of incorporated speakers in optional models = 12.5cm (5”)
  • Wow & Flutter – Moins de 0.2% pondéré
  • Maximale élévation – 13 \circ
  • Humidité et température d’opération +5°C to 140°C, 20-90%
  • Poids equipment – 25 to 33 lbs, 11 to 15 kg

Frequently Asked Questions

Q: De quelle tension le projecteur à besoin?

A: Il utilise la tension de 100 à 240VAC, qu’il soit à 50 ou 60 Hz.

Q: De quel type de lampe possède le projecteur?

A: ESL/SSL models utilizes ELC, 250 watt 24 volt while SSL-OL staffs are using either EYK or EWG 300 watt 120volt lamps.

Q: How many frames per viewer does the projector support?

A: The projector allows the use of a film running at a speed of 24 frames per second standard sound speed.

Q: Do you have any means of getting still pictures?

A: Yes – if buying selected models of the projector – still pictures are one of the features.

Q: Xo sa hamann eh amxeen serkh%wa?

A: 25mm UHD BiAmp Theatre Speakers sweating models ESL & SSL And 35mm HDD BiAmp Theatre Speakers sweating for model SSL-OL.

Q: How big a reel can the projector handle?

A: The projector takes a maximum reel capacity of 2000 feet, 600 metres.

Q: Are Projectors Suitable For Use With Public Address Systems?

A: Indeed, in cases where the projector is additionally fitted with a supported microphone that is connected to the amplifier mic jack, it can efficiently function as a public address system.

Q: Why might the film be persistent and not be able to advance?

A: If a film does not advance correctly, the first determination is the state function switch, which may be turned to the FORWARD/RUN position, and if the tape guard switch is reset.

Q: What Are The Climate Conditions Needed For The Projector?

A: The operating temperature should not be lower than 5°C or higher than 140°C under a humidity range of 20% to 90%.

User Manual

Page 1
Eiki SSL, ESL User Manual
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Loading...